Computer freezes (no blue screen), but on reboot displays error code 124.

Similar Questions

• I can't get into xp. a blue screen appears with the 0x0000007e error code

  I went to a blue screen.  Can I make the Windows/sysrem22/hal.dll file is missing or damaged.  I made a copy of the file on a CD from another computer, but I don't know how to load it on my desktop computer.  It doesn't work in either safe mode.  I hope that if I can get this file copied to my desktop, everything will be OK.  Help, please.  Jon

  Hi jon56b,
   
  Follow the steps listed in the article given below to resolve this issue:
  How to troubleshoot a Stop error 0x0000007E in Windows XP
   
  For error "hal.dll is missing or corrupt", you can consult the following article:
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

• Blue Screen of Death Dell PC error Code 650F137B

  Hello

  Recently I was make a noise from my PC to start up, and then all of a sudden now I have a blue screen with the error code 650F137B that the same thing happens

  When I try to start in safe mode, fortunately I backed up my data before that happens, it's a Dell Dimension 5150. I would appreciate some help with this please

  Gerry

  You are welcome.

• Blue screen after having ejected the error code 1000007e game disc.

  Hello, I get the BSOD error message when I eject a game disc every time. It's sort of a stop error message. ::

  Error 1000007e, parameter1 c0000005, 80515b9d, parameter3, parameter4 f7bdb930 f7bdbc34 parameter 2.

  I've updated the drivers for DVD players, and it seems to have worked so far. Thanks to each of you for your help.

  Jay

• Why my screen freezes or blue screen appears in normal mode but not safe modes?

  My monitor quivers at the start and in security mode. PC freezes or blue screen during normal mode but not in safe mode.

  Hello

  If it works, fine, safe mode, start your computer in a clean boot State to eliminate conflicts of third party software and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  In addition, follow the steps in this article.

  Resolve stop (blue screen) error in Windows 7

• Y at - it virus? -Causing blue screens and random reboots

  Y at - it of viruses out there that are affecting the computers and blue screens and random reboots of the origin?

  There is, but your problems could be caused by other issues too,

  Tell us the information on your computer and we give information about the problem.

  you do something specific when you get the blue screen?

  you have anti-virus (what kind)

  did you install any software/hardware recently?

  a good way to fix a wide variety of pc problems is to run a chkdsk

  1. Hold the windows key
  2. Press R
  3. in the box that opens type of command, press enter
  4. type the following echo Y | CHKDSK C: /r
  5. Restart the computer

  It will scan your hard drive for errors that can be caused by being improprley stop, as when the death bluse screen occurs.

• Vista: continuous blue screen, followed by reboot

  I was asked to look at a Vista that machine is in an earring, blue screen and reboot.  The only thing I can get to the blue screen is 'Mulitple_IRP_complete_requests' they have not added hardware or consciously updated anything but Microsoft Update could do.

  Can someone suggest an approach to identify and solve the problem?
  How I freeze the blue screen to note additional information?
  Thank you.

  92

  These were related to SRTSP. SYS driver of antiviral software from Symantec.  I would like to delete and replace it with MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

  http://www.Microsoft.com/security_essentials/

• Adding RAM causes freeze or blue screen. RAM works well with Win XP

  I upgraded from Win XP to Win 7.  I had problems with the installation so I removed all non-essential equipment and was able to complete the installation.  When I add more RAM, I had emoved (two DIMMs of 512 MB) to the current 1 GB DIMM, Win 7 either freezes or I get a blue screen after boot up (it does not boot up to the desktop computer).  Even RAM works very well with my old XP OS (I did a disk clone before moving to Win 7).  The card motherboard BIOS is up to date (according to eSupport) and DIMMs are the same characteristics (a 1 GB DIMM and two 512 MB DIMMS for a total of 2 GB).  Windows 7 works very well with just the 1 GB DIMM in memory 1 of 3 location, but any combination of causes freeze or blue screen.  Is there something on the way Windows 7 manages RAM which is causing the problem?  If so, is there something I can do to solve the problem?

  try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

• First Pro CC launch my computer shows a blue screen: kernel security check failure

  Hi all

  Plug-in for some time Adobe Premiere Pro that I like a lot. It works on my laptop Asus on Windows 10. But since yesterday I can't launch it! Every time I run Adobe Premiere Pro my computer stops on saying a screen blue "your computer to encountered a problem and needs restart." We simply collect information etc."is the error: kernel security check failure. So I used the software, which crashed to see because of what program my computer shows a blue screen. After scanning my computer it says that the problem is probably caused by ntkrnlmp.exe and ntfs.sys

  I therefore seek a solution on forums but I've never found! I tried to update my vain pilots en and I also tried to reinstall Adobe Premiere Pro but its didn't work it still shows the same error.

  Thanks in advance for your help

  Kind regards

  Mathys

  Hello

  I just found this on a Forum:

  Good night «»

  After the words... just restore your graphics driver to the previous version, wait that Microsoft developers to create a new kernel update, pour the update your graphics driver.

  As of December 25, 2015

  Friendly. "

  Hopefully this can you help accessory!

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

  Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  Hi Heather,

  You can follow the thread: creative cloud update - error code: 3 where this problem is already discussed and resolved.

  You can also follow article: error "Unable to install" received when installing Adobe Creative Cloud desktop application that will help you solve the problem.

  Thank you

  Yann Arora

• InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  You must install the Adobe programs since the original installation programs. Never migrate from a backup.

  Activation Adobe should detect a computer when the material has not been changed.

  If this isn't the case, you must contact Adobe support.

• Computer immediately freezes and blue screens. BIOS error could not be read.

  Hi bought a computer from a friend worked perfectly for them now, I plugged my old PC cables and it worked fine for like a week, then when I turned it on it just completely frozen, he told me that the specifications of the processor then instantly frozen before even that came to the sign in screen, caps lock shift etc. on the pc do not work and then it worked fine for a week and then this morning I went and I registered and it blue planned to tell me something about bios couldent read it you stop fast and now I am to plant him as soon as I turn it on, the only new material I installed was a new adapter wireless a few days ago , but the problem started before that, any help you can give would be great, thanks.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.