First Pro CC launch my computer shows a blue screen: kernel security check failure

Similar Questions

• HP computer shows a blue screen and restarts.

  * Original title: Puzzle blue screen

  I tried to help a friend trouble shoot a problem. Its a HP computer, displays a blue screen and restarts. We are unable to read the message. I went through the newspaper and cannot determine the cause error. I have several possible solutions thanks to this forum, but I'd like to have someone looking at the landfill to see if I'm on the right track. It seems to me that it could be a power supply problem.

  Here is the link on Onedrive for minidump files that I found.

  Thank you.

  WPD50

  No puzzle here.  Symantec is killing netio.sys.  It should be removed and replaced by MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Satellite L505-13W shows error blue screen

  My error on blue screen shows computer laptop SATELLITE L505-13W.
  The operating system is started and after some time, it shows a blue screen error and restarts.

  Even after repair successful when restarting requested repair, he showed the same error.
  So I tried to recover with the recovery cd, but it turned out to be a tragedy.

  He eraced my complete HDD to stone age and smiled saying recovery is not possible.

  Please help me...

  Hello

  If the laptop can not be recovered using the recovery disc, then it feels the hardware problem.
  Are you sure that your recovery disc is OK?
  Have you tried to install the OS using another installation disc?

  Perhaps it would be useful to check if the problem could be related to defective recovery disk, but if the BSOD (blue screen of death) appeared before the installation of the OS, I would say that the problem can be caused by an internal hardware malfunction

  It would be necessary to check the modules of RAM and HARD drive.
  HARD drive can be verified by using the diagnostic software from disk as Drive Fitness Test (freeware)

  RAM could be checked with a tool like memtest, but you need a system to market, then in this case, you can not check the RAM using a software that I recommend to remove a module and test the laptop using a module in each slot

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• PC restarts showing a blue screen and ATI RADEON XPRESS 200 graphics works only with WINDOWS 7

  (1) I have a motherboard integrated ATI RADEON XPRESS 200 SERIES
  I installed the 64-bit windows 7 but everytime I use, it shows a
  BLUE SCREEN and instantly gets restarted.

  ERROR INFORMATION
  
  Problem event name: BlueScreen the system Version: 6.1.7600.2.0.0.256.1
  Locale ID: 16393 BCCode: 1 BCP1: FFFFFFFFC0000005 BCP2: FFFFF960000D69EA BCP3: 0000000000000000 BCP4: 0000000000000000
  OS version: 6_1_7600 Service Pack: 0_0 product: 256_1

  Pls explain why this happens n solution for this?
  
  (2) I downloaded the latest updates for microsoft video card, but they are in the form of files * .cab, can someone explain how to install them.

  With the Xpress 200 integrated graphics, you will not be able to get Aero or other effects of Windows 7.

  You can adapt a motherboard graphics card: AGP or PCI-E slot there. A Radeon 3400 or other card compatible Windows 7 can be pretty cheap and would provide Aero and other effects of Windows 7.

• I try to use develop it but it shows me blue screen

  I try to use develop it but it shows me blue screen

  Lightroom preferences-> Performance tab-> uncheck the option of GPU.

• Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Photo shows in the library but when I opened to develop that it shows a blue screen with a cross diaginal

  Go to preferences > Performance tab and uncheck the option "use graphics processor. Adobe is aware of this problem and are studying, but in the meantime to uncheck this option should your unit develop problems.

• First pro. external monitor does not show the images.

  First question double pro monitor.

  My film shows sporadically on the monitor.

  I'm running to update Premiere pro cc with Yosemite

  on the more powerful 15 "macbook pro 2015 with a nec pa272w monitor.

  Installation works perfectly with Lightroom and Photoshop.

  First, I have the screen selected in the preferences/reading and ok' ed.

  Transmission is checked in the program monitor menu.

  The monitor shows my first pro content, it is sometimes erratic. Usually after opening the program my images does not appear on the monitor. Then I go into preferences/reading and click the ok button and the area. Then I go back to my sequence and often after a pause of two seconds my work often shows on the monitor yet... sometimes, but not at the moment.

  In the preferences of my laptop, I have my monitors side by side with the menu bar on the screen of the laptop. I also tried to drag the open program of my laptop screen in the monitor and sometimes then the laptop screen will function as the external monitor and show my pictures. Then if I drag to the screen of my laptop I get the external monitor to show my project. However, this made the first collision. I also made sure that nothing on my laptop screen encroaches on the external monitor.

  Please help me solve this problem.

  Hello

  Try this:

  Go to file > project settings > General and change the "Video Renderer" to "only Mercury playback engine software. Click 'OK' and select "Remove the Previews". Then check if you still have the same problem.

  Thank you

  Regalo

• First Pro CC launch

  When I try to launch the first Pro CC, I get "dynamiclinkmanager quit unexpectedly. According to the tracing, the issue seems related to rename a file. I have a MacBook Air from 2012 with an Intel HD Graphics 4000. Other tips I've seen involves swapping drivers nVidia CUDA and video cards and repair permissions ( when I try to launch the Premiere Pro CS6 I get dynamiclinkmanager quit unexpectedly). ASKER another the same question never answered ( "dynamiclinkmanager quit unexpectedly" - persistent dialog ). I can't share video cards, I don't have an nVidia card and repairing permissions did not help. What is going on? Here's the full traceback:

  
  

  Process: dynamiclinkmanager [12841]

  Path: / Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/dynamiclinkmanager.app/Contents/MacOS/dynamiclinkmanager

  ID: com.adobe.dynamiclinkmanager.application

  Version: 7.2.2 (7.2.2.33)

  Code type: X 86 (native)

  Parent process: launchd [285]

  Manager: dynamiclinkmanager [12841]

  User ID: 501

  Date/time: 2014-06-18 18:29:35.178-0400

  OS version: Mac OS X 10.9.3 (13 D 65)

  Report Version: 11

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  termination with eception exception of type dvacore::filesupport:rename_file: $$$ / dvacore/filesupport/Rename = cannot rename file ' @0 ' to ' @1 '. "

  Abort() called

  [Please choose only a brief description to the title of the thread.  Please, don't post crash logs.  This isn't a user forum, support.]

  Post edited by: Jim Simon

  I solved the problem. It was a permissions problem, but not a single repair disk permissions can fix. (Repair disk permissions cannot affect third party files: maintenance Mac five myths |) Macworld .) For some reason, the installer for Adobe has put the owner of some files in library/Adobe on 'root '. The solution:

  1. Open "/ Library/Application Support.
  2. Get info on the file "Adobe".
  3. At the bottom, under "Sharing & permissions", click on the padlock, click the gear popup to set the owner to you and then click on the little gear popup to "apply to enclosed in... elements. »

  If you prefer the Terminal (I):

  1. "CD ~/Library/"Application Support / '.
  2. sudo chown 'whoami' r: 'whoami' Adobe

• Laptop computer displays a blue screen error about corrupt or missing files in Vista

  went to get on my laptop and all I have is a blue screen and a mess that says missing or corrupt

  It's Windows vista and it doesn't have me send a boot drive

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro M50: ATI Radeon Mobility 200 - error blue screen

  Hello

  My girlfriend has a Satellite Pro M50, she bought 3 weeks ago about, recently it started to freeze so that in general use (play music, browse the web via wifi etc.) and then it blue screens. The blue display lights only for a split second before disappearing and the reboot of the machine.

  Once he started again I send the error report to Microsoft and it lets me know that he could have the ATI drivers, I went to the website of ati to search for drivers, but for some reason any, that there is none for the mobility of 200 m, I used the drivers from the toshiba to the opposite site and this seemed to solve the problem for a short time , but it's happening now once again, is this a hardware problem or software and what should I do?

  any ideas anyone (specification of machine below)?

  Toshiba Satellite Pro M50
  Intel Celeron 1.5 ghz
  512 MB of RAM
  40 GB HARD drive
  ATI Mobility Radeon 200 m graphics card
  Win XP Home Ed

  see you soon

  Rich

  Hello

  The blue screen occurs due to the failure of the serious software or hardware failure. You the case looks like a hardware problem. As John said in the first response, it could be the graphics card or something similar.
  You guarantee is valid and I really recommend to contact the Toshiba authorized service partner in your country for the control of the machine.
  If replacements are needed this should be done for free because of the valid guarantee.

• Satellite Pro A100 - driver Nvidia GeForce 7600 Go blue screen problem

  Hi all

  I have a problem with my Toshiba laptop Satellite Pro A100 PSAASE.

  Description of the problem:
  During a game for half an hour the screen darkens and a second view later, I get a blue screen.
  After the reboot, that the solution of the problem of Windows Vista tells me that the problem is caused by the graphics driver Nvidia see dietails below:

  Problemsignatur
  Problemereignisame: BlueScreen
  Betriebsystemversion: 6.0.6001.2.1.0.768.3
  Gebietsschema-ID: 3079
  Files that help describe the problem:
  Mini101708 - 01.dmp
  SysData. XML
  Version.txt
  More information about the problem:
  BCCode: 116
  BCP1: 87A8A3A0
  BCP2: 8C8109B0
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Serverinformationen: 1daf36bb-f6aa-446d-9ddf-545744789c19

  I tried to find a solution or a new driver for my graphics card, but I couldn't find any useful information. I really the lates driver for my graphics card according to Toshiba lateral support (driver version: 7.15.11.5616), on the Nvidia homepage I also could not find a newer driver that I have.

  Details on my laptop:

  Modellname Satellite Pro A100
  TEILENUMMER PSAASE-00G004GR
  Serial number 27069711Q
  BS-Microsoft Windows Vista Version? ¢ Home Premium 6.0.6001 Service Pack 1
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz
  2048MB RAM Arbeitsspeicher
  Festplattenkapazitat 120,580,372,480 [bytes] 112.299 [GB]
  Capacity of the freien Festplattenspeichers 27,078,627,328 [bytes] 25.219 [GB]
  Video NVIDIA GeForce Go 7600 Version = 7.15.11.5616
  Bildschirmauflusung 1280 x 800 pixels
  Farbqualitat True Color (32 bit)
  Its Realtek High Definition Audio (with SRS) Version = 6.0.1.5326
  Netzwerk Intel (r) PRO/Wireless 3945ABG Network Connection Version = 11.5.0.32 MAC-address = 00:19:D2:5E:37:D2
  Intel(r) PRO/100 VE-Netzwerkverbindung Version = 8.0.44.0 MAC-address = 00:A0:D1:6 B: F1:F5
  Modem TOSHIBA Software Modem Version = 2.1.73.0
  Internet Explorer 7.0.6001.18000
  IDE-Gerät TOSHIBA MK1237GSX ATA Device
  CARPET * a DVD-RAM UJ-850 s ATA Device Version = 1.10 FW
  YC3555P CIP693I SCSI CdRom Device FW-Version = 1.0

  I really would apreciate if someone can help me solve this issue.

  > During a game for half an hour, the screen darkens and a second view later, I get a blue screen.
  Well, my first thought is that this problem is related to the graphics driver.
  I mean it could be a software problem.
  But I know that a BSOD can also occur if the graphics card chip began to malfunction.
  In your case I m not sure what could cause this problem. But to play a game, that the GPU is running with a maximum yield and produce a lot of heat. If the temperature rises to a higher level the GPU can also cause a BSOD.

  Anyway, first of all, you must check if the graphics card driver update could solve this problem.
  Maybe you could use a driver from other websites but please note that this is ONLY possible at your peril!

• Computer keeps restarting, blue screen after windows logo.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  =========================
  Not much help I guess... but maybe the
  This article offers a few ideas:

  (330182) how to troubleshoot a stop
  error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  John Inzer - MS - MVP - digital media experience

• When I go to pogo my computer gets a blue screen and then turns off and rebooths

  When I go to pogo.com I log on my screen turns blue, then wrote about this, but it's on and off fast cannot read, there do not have the time

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.