Computer guard reboot after installing Vista updates.

Similar Questions

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• Satellite P200 - 1FC dies reboot after installing Vista SP1

  As recommended I tried to install the service pack for Vista, but when he tried to restart I got "the installed program cannot start. Click OK to turn off the computer. »

  It will not restart in safemode, or any mode, actually.

  The drive only what i've got is the recovery disk that says that if I use it I lose all my data. Microsoft says 'Toshiba to ask. "

  So, here I am.

  Any ideas?

  If you want to ask Toshiba then you will need to call the support hotline
  This is a user forum and as much as I know there is no people of Toshiba

  So now you deliver what laptop do you have?
  How have you tried to install SP1?

  More details are needed...

• Faulty Windows Update after installing Vista sp1

  I finally got windows vista service pack 1 to install on my computer. After installing, windows update keeps failing when trying to update.

  I get the error code 80246008

  I checked the BITS/Background Intelligent Transfer Service, and he was arrested. It is set as automatic (delayed start). When I try to run it it gives the error 1068: dependency or the group could not start

  Checking dependencies, I found that the COM event system + is thus stopped. It is located in autostart. When I try to start what it gives error 193: 0xc1 and says could not start the system event COM + on the local computer "Windows".

  
  

  I couldn't find anything on the forums which has worked so far

  @umchief only: Riffs on Mike's response, try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• VISTA HOME PREMIUM 643 ERROR MESSAGE AND COMPUTER SLOW AFTER INSTALLING VISTA

  I WANT TO GET MY PC RUN FASTER AND AFTER INSTALLING VISTA, IT SEEMS MORE SLOW TO EVERYTHING I TRY TO RUN I HAVE AN EMACHINES T5052 AND IT SAYS THAT I ONLY HAVE 1 GB MEMORY (RAM) BEFORE I WAS USING WINDOWS XP PLEASE I NEED HELP, THUS FREEING UP SPACE AND DO IT RUN BETTER

  OD WINDOW ADVANCED CARE?

  You must have only ONE AV installed; otherwise, you get crashes, freezing, program conflicts, etc.

  Defender is an Anti-Spyware, not an AV.

  The FREE Malwarebytes will work OK with them.

  And do the work that I advised to do. Mick Murphy - Microsoft partner

• After downloading Vista updates

  After downloading Vista updates and install them, I get the new updates icon in the taskbar. While they inspected the history update, I see where the update was installed. What should I do to get rid of him. It comes even when I restart my computer. I have administrative rights for this computer.

  Hello

  Updates are you referring?

  Try the steps and then check.

  Step 1:

  Run the fix of the article.

  Reset Windows update components.

  http://support.Microsoft.com/kb/971058

  Step 2:

  Follow the steps in the article.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  See also:

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

• Webcam and DVD player get not recognized after installing an update

  Original title: Why webcam stoped working after vista update? __
  Cam web and CD/DVD of my hp 9623 cl stoped working after the update to Vista. The two are unavailable in Device Manager too.

  need help to restore it. Thank you

  Hello

  1. may I know what update has been installed?
  2. did you restart your computer after installing the update?

  Run Fixit diagnostic tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• How can I reinstall MS OneNote2003 after installing Vista?

  Hello everyone,

  I was a bit confused of the 'ExpressUpgrade' action, because I first thought I would get
  a DVD-Windows Vista upgrade, but as I can see in ModusLink he is named "Windows Vista Home Premium 32 bit DVD"... OK, it's done now, but that's why I have other questions:

  There was additional software and utilities already installed (I have a Satellite P100 - 463 WinXP).
  I know that there is this "step by step Toshiba DVD" who has first updates the BIOS, install Vista and then the drivers needed and utility (as "Toshiba Assist" and all the others, I guess). As it is written in the guide step by step, all programs etc. will be deleted, as formatting of the hardddisk, ok.

  But with the laptop, there wasn't "MS Office OneNote 2003" already installed and this program, I have not found on one of the DVD / CD. On the CD is 'MS Works 8.5' and on 'Tools-CD"that I was burning of 'C:\toolscd' there are things like"InterVideo Win DVD Creator"(the player) and"recorder of Sonic.

  On the "Recovery-DVD" is just the Image of Windows XP preinstalled + software etc and I think of course, there is also the OneNote2003, but like I said I can't find the setup.exe from OneNote2003 anywhere...

  Or could it be that OneNote2003 will also be installed with the installation of Vista? What is a "core" Vista, don't not patched by Toshiba? As I was reading in the Vista_Express_Upgrade_instruction_multilanguage.pd f (the manual "upgrade progressive", first BIOS is up to date, then installed Vista and here again I have to use the toshiba DVD to install the software and drivers...) Is it only "utiltities' as"Toshiba Assist"or as software?

  Last question: update after the BIOS that is needed for Vista, is still possible to install the "old" Windows XP + stuff pre-installed recovery-DVD or this BBIOD goof only for Vista update and I cannot restore the original recovery image?

  And anyway, can I install new stuff like Works 8.5 etc. on Vista or will I have problems with it?

  Thanks for the replies.
  Greetings, launchee

  Hi kai

  I know that the Vista upgrade is a bit confusing
  So I'll try to clarify some things:

  1.) Toshiba Recovery XP CD contains all Toshiba drivers, utilities and tools, as well as additional programs like OneNote, Win DVD, etc.
  It is not possible to install this software separately without using the recovery CD because these programs are part of the image.

  2.) as far as I know the received "Windows Vista Home Premium 32 bit DVD of moduslink company is not a restore CD but the real Windows Vista installation CD. That's why you need to install all the tools of Toshiba and the drivers after installing Vista. This CD does not include additional software such as OneNote or WinDVD

  So finally, you will be able to install Works 8.5 on Vista because you have one working on CD separately but it s not possible to install OneNote from recovery CD

  But you can try another way. You could create a second partition and you could install the Vista to the second partition.
  Laptop you would use the two operating system; XP and Vista. The Vista also provides a clean boot manager.
  Therefore, it is very easy to switch between the two OS's.

• After that Vista update of my Satellite L40 won't start

  After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

  I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

  Please help me!

  For me, there is only one option: disable the automatic update to Vista.

  By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?

• I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

  When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Error 80070020

  windows update

  My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?

  Hello

  read thisL

  Windows Update Error 80070020

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  and also see if this helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com