After downloading Vista updates

Similar Questions

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• After that Vista update of my Satellite L40 won't start

  After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

  I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

  Please help me!

  For me, there is only one option: disable the automatic update to Vista.

  By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?

• After downloading the updates, I can't reboot my pc, so now I can't receive updates.

  After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

  Hi stevenstar,.

  a. you just download the updates of Windows or you have installed them as well?

  1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
  Once the computer restarts view the Windows update history and check if updates are installed.
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
   
  2 type eventvwr.msc/s in the address bar.

  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PSE 13 crashes after downloading an update

  Hello

  Have a problem with Photoshop elements 13.0 crashing after update.

  The program runs for a few minutes after downloading the updates, and then Windows indicates that the program has stopped working, and the program stops.

  The problem can be solved only by the loading of the purchased program from the Adobe website, but without the support of new files camera RAW etc.

  The computer is new, no limit material, the version is Windows 7 pro (SP1), 64-bit.

  Enabled Adobe Download Centre (from whatever reason not enrolled in 'my account').

  Please notify.

  Thank you

  A.D.

  reset your preferences -: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Running Vista Edition Home Premium on Sony VGX-TP25E. After downloading the updates offered during installation, a new window opens indicating that the update works only on Vista. Computer has preinstalled Vista, but somehow it is not recognized.

  There is no error message number.

  Jim,
  It seems that if the this update does not work properly.  Where Sony allows you to download this update to live?  It is on the site of Sony or a Web to Realtek site?  You will need to contact the creator of this driver and know if there is a new one and/or give the problem you are having because they will have to fix this.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• connection after the vista update problems

  After that windows vista updates, restarts and configures, I can't seem to login screen. I type the correct password, but the screen only flashes for a second and watch the blue progress ring, but then comes back to the right of the login screen. I have to restart and run system restore just to connect, this happened last week with the same update and is quite a nuisance. Updates include:
  (important)
  Update for Windows Vista (KB971029)

  Windows malicious software removal tool - March 2011 (KB890830)

  (optional)
  Updated the Realtek for Realtek PCIe FE Family Controller driver

  -Input - Synaptics Synaptics PS/2 Port TouchPad

  Windows Live Essentials 2011 (KB2434419)

  Hi Raziel,

  First of all, we will do two important things:

  1. DON'T download or install updates from Windows Update for Realtek and Synaptics (or any other device drivers).  Instesd of get them through Windows Update, go to the computer or Web sites of the device manufucaturer to get the latest update and install instead.  Hide these two Windows updates so they don't mind again.  Unless expressly stated by the manufuacturer for updates from the Windows Update driver, always bring manufacturers instead.  They are the cause of many problems of update.

  2. in prior to starting the updates (and for each 3 other updates and driver updates), create a System Restore Point.  Of allows to install the other three updates one at a time and manually instead of through Windows Update.  Go to http://www.microsoft.com/downloads/en/default.aspx and look for the KB number and download the update appropriate for your version of Vista and install it, and restart and make sure that all is well before you more on the following.  If we have the same problem, use the restore system back out of it and post back here with the specific update that won't install manually as well as any error information, you can find the problem.  If we can reduce it to one, we will have a better chance of coming up with a solution.

  I hope this helps.

  Good luck!

• After downloading the updates, pc keeps trying to re-boot

  Cannot restart after downloading updates of security. Bed: "Configuring updates: stage 3 of 3-0% complete."  Do not turn off your computer '. The '% 0' does not; He's trying to restart after 3 to 4 minutes, then the same screen.  I tried Ctrl/Alt/Del for attemtempted re-start, tried last good Config known but not good; Get RSTRUI.exe message "the instruction at OX75143211 referenced memory at OX00000004.  The memory could not be read '. Any suggestions please?  Not much of the experet these things...

  Hi Gina,

  1 have you tried safe mode?

  Method 1:

  If this isn't the case, then I suggest you check this below article provided in Windows Help.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  You can perform a system restore using the Windows recovery environment (WinRE) to run the system restore (if system restore is enabled on your computer)

  a. Insert the Windows vista installation disc in the disc drive, and then start the computer.
  b. press a key when the message "press any key to boot from CD or DVD".
  c. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  d. click on repair your computer.
  e. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next.
  f. in the System Recovery Options dialog box, click System Restore.
  g. follow the instructions in the System Restore Wizard and choose the appropriate restore point.
  h. click Finish to restore the system.

  Method 3:

  Once you are finished with the system restore, I suggest you follow these below provided as follows.

  Try to reset the Windows update components and check if this solves the problem.
   
  Step 1:
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058
   
  Step 2:                      
   
  If the problem persists then I suggest you perform the steps mentioned in the link provided below.
   
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358 
   
  Note: Ignore the title of the article as it is applicable to the issue you are facing.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Lost audio on Satellite Pro A120-PSAC1E after downloading Windows updates

  Hello

  I lost all sound on my laptop after downloading updates for Microsoft XP from the Windows Update site. I followed the instructions on solving the problems on my laptop and uninstalled Microsoft WINMM WDM Audio compatibility Driver.

  I found afterwards kb 935448 XP update that is supposed to solve the audio problem, but this did not work. Now I want to reinstall the audio compatibility driver to see if it will work now, but I can't find anywhere to download.

  Anyone know where I can find this driver?

  Thank you

  Hello

  This issue has already been discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  As you say that the MS difficulty 935448 helped.

  You want to reinstall the audio driver and don t know where to find this driver?

  I visited the European Toshiba driver page and found the driver of his right.
  Simply choose your laptop download driver form. Satellite Pro-> Pro A120 PSAC1E-> Win XP

• Have to restore the ipod after downloading the update. Question, help please

  Hello!

  I have a large music library on my iTunes and so all my music does not fit on my iPod Classic 160 GB, which is fine.

  I have the latest version (last one that came out) the iPod Classic 160 gb.

  I have the latest version of iTunes.

  I use Windows 7.

  So basically I had no questions for recent years until last week.

  For a long time, I went through my collection of music [in view of SONGS] and placed check marks next to all the songs I want on my ipod.

  It's the way I like it. I have enough free space on my ipod for new music, I get every month so that it works.

  I connect the iPod to iTunes and SYNC my library, and it adds new songs I added to my iTunes library since I'm finally connected.

  Okay - here is the problem.

  Last week, when I connected my iPod Classic to iTunes, I got a saying there was an update to download.

  I am used to what is going on all the time with my iPhone, but I can't remember the last time there was an update for my iPod.

  Intrigued and not think what awkward or troublesome would come from him, I'm agree to download and install the new update.

  When he did download it says that it does not recognize the device (iPod). After searching for hours for help, I finally disconnected, stop, restart and rec-connected my iPod to iTunes.

  He says that he has no music on my iPod. I checked and it was not. He disappeared. ***!?!

  Fortunately, all my music was always in iTunes so I went with my library SYNC (again, I have the titles I want selected already). He said he could only and basically the only option was to reset my iPod to its factory settings. Because the way that my iPod is empty anyway, I thought, fine, so I did. I have restored its original settings.

  Later, I did the same thing after disconnecting. Shut down, restart, clean the cache and the registry, etc and then reconnected the iPod to iTunes. My first thought was maybe I should try to download the update again - since the ipod is empty at this time - what the *, why not - I would rather finish now than get my music on my iPod to be prompted to download new update, and start all over. So I clicked Check For Updates when my iPod was connected to iTunes and it said there is no new update. I don't remember the exact update, but I'm sure it was like 2.05 something, and what I have now (and had before all this happened) was 2.04 or something like that. So does well, no update? No matter what. At this point, I'm SO frustrated - I want just to SYNC my library via checked/selected songs and get back them on my iPod.

  When I went to SYNC, nothing happened.

  So I went to the tab that showed the music and it only gives me the option to SYNC my library of ENSEMBLE music (which is too large and does not fit on my iPod) - OR - I can go through this form on this page and browse and select the ARTISTS that I would like to add.

  It's so frustrating. First of all, I don't want to pass by and re - select all the songs I want to add - the main reason being - he did already - when you click on my library and select the songs view, you can see all the songs that I previously have selected/checked remains unchanged. Second, if I had to do it the way he wants me to all simply by selecting ARTISTS who will not work.

  Sorry for this long crazy question - but basically - how now factory - reset iPod Classic for SYNCING with my iTunes library with the songs of checked/selected, I already have checked - and not to go through and do it by limiting my will and have to select only the artist (not to mention that I did as I want).

  I appreciate any help or insight that someone could offer.

  Much appreciated!

  On the settings screen of the iPod summary (what you see in iTunes when you select iPod), there is a checkbox to Sync only checked songs and videos (wording may be different for your iPod).  Enable (check) this setting in combination with sync entire music library.

• After downloading the updates, Windows XP asking to validate again.

  I have a valid XP PRO Comercial disc complete with proof of LICENSE. The second time I have used windows loaded OK BUT when I was invited to download the updates I received notification that my copy of windows XP PRO was not valid and now I get the reminder that I don't have a valid copy of windows ALL THE TIME I USE it! How can I get rid of this pop up?  The updates seem to be automatically download OK!

  original title: Validation of XP PRO?

  1. Download this diagnostic tool, save it to your desktop, and then double-click the saved file: http://go.microsoft.com/fwlink/?linkid=56062

  2. after running the tool, click on the continue button, and then click the copy button (to the Clipboard).

  Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• Computer won't turn on after a Vista update. How can I fix?

  Yesterday, I tried to install a Vista update.  It was wide enough because the message says that I wouldn't be able to use my computer for about an hour.  I started the process and the left.  4hours later I returned and my computer is waiting for permission to restart to continue the update process.  I rebooted and for a while it seemed to make progress.  Again, I have left for another 3 hours or more, and when I got back to my computer was hibernating and wouldn't wake up.  After trying to wake up in vain for 15 minutes, I made a forced stop.  During its restart in safe mode, I got a message saying that the computer failed to start and suggested a system recovery, who did.  He worked on that when I had to go to work.  Throughout this process, he has been connected with a full battery.  4 hours later I went back to work.  Despite being connected, with the lit sheet icon, my computer was off with the battery low light flashing.  I tried to turn it on.  He showed the black and grey, window prompting me to start in SafeMode or start regularly, before I could choose, the low battery alarm when off the coast and off the computer.  Now, I can't turn on my computer with or without the battery then that plugged or unplugged.  I don't know what the exact date was, just that it's an update to Vista.

  Hello

  It sounds like a hardware error which would happen at the next reboot and is
  probably incidental to the update. You need help from a real computer store (one who
  internal service and not of leeks and display a Best Buy or other stores)
  or support from the system manufacturer.

  I hope this helps.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Lenovo K4 note do not install Apps after download or update - error 503

  Hello

  App on my phone will not proceed with the installation after downloading either Wi-Fi or data playstore. Usually I see error 503 or 504. In addition, some installed applications are also not accessible throwing error "application not installed".

  Help, please.

  Hi all

  Please follow the below as a solution and check the troubleshooting steps:

  1. tap on settings-> Apps--> all Apps-> Google Play Store: clear cache. Clear data
  -> Download Manager: clear cache. Clear data
  -> Google Play services: Clear Cache. Clear data
  2. tap on settings-> Security-> unknown resources: activate

  Note: All data backup of the phone before performing the steps above as it can erase important data.

  Please let us know if the measures have helped to resolve the issue.

• A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

  OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

  First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

  Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

  After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.