Computer has a period when you do something
I don't know how to describe it. But when I move my mouse, it makes small jumps, it is not smooth. Also, I watch videos, it's as if there is a slight delay, as everyone has a lisp and repeat things.
* original title - my computer seems to have a hiccup - by moving the mouse while watching a video, everything has a very slight delay, it started all of a sudden *.
Hi Schwarzl,
· Since when are you facing this problem?
· Have you checked the problem in safe mode?
Check to see if the following is useful.
Method 1: Log on to the computer manufacturer website and update the latest drivers for chipset, including the other updates to the device driver.
Method 2: Start the computer in safe mode. If no problem occurs then, follow this link to find the cause of the problem.
Note: Make sure that you put the computer to a Normal startup once you are finished.
Tags: Windows
Similar Questions
-
Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.
Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
Hello
CAPSLOCK ALWAYS ON... OFF CAPSLOCK HAS SO THAT WHEN YOU PRESS ON... THEN TURNS ON AUTOMATICALLY
Hi david,
I deleted the account and created a new... Problem solved. Thank you for your help... -
I recently downloaded a program on my computer by mistake. When you try to uninstall, I get the message that I don't have authority to remove the program and contact the system administrator. I am the administrator and logged as such.
See if that helps.
How to take possession of an item in Vista. Works also under Windows 7
http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/And possibly:
Revo Uninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html -
Why is it so f * hard Adobe when you need something? Order details: command #AD020044838 file is currupted.. Please correct or give me a refund
Please contact our support team so they can solve the problem with you - contact customer service
Thank you
Bev
-
When you import something out of a DVD or CD...
When you import something off a DVD or a CD how to run Lightroom to copy imported images or a folder to a specific folder on my hard drive? It seems to default to moncatalogue but leaves the location on the CD rather than copy it to the drive. If I remove the CD images is reported as missing.
When I go to the top of the import screen I can change the source, but the location information to the right are not active or modifiable. I am new to lightroom and coming from Photoshop elements.
At the top of the Lightroom Import dialog box, you have several choices, including 'Add', 'Move', 'copy '. In this case, you must select "Copy" and then you should be able to specify the purpose specified in the right panel.
-
Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.Please help, I need to uninstall something!---------------------------------------------------------------------Windows host process (Rundll32) has stopped workingSignature of the problem:Problem event name: APPCRASHApplication name: RunDll32.EXEApplication version: 6.1.7600.16385Application timestamp: 4a5bc637Fault Module name: StackHash_9629Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec49b8fException code: c0000374Exception offset: 000ce6c3OS version: 6.1.7601.2.1.0.768.3Locale ID: 2057Information additional 1:9629More information 2: 9629b7be96a6d05c3ae74dcb4df31847Information additional 3:2716Additional information 4: 271690c76c60b0182163ae26acc5f429Read our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txt
Hello
Method 1:
I suggest to set up the computer in a clean boot state, then try to uninstall the software.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
Method 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Satellite A100 has sometimes unresponsive when you turn it on
I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.
Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.
Pls advise.
Hello
In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?
Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?
-
Original title: drive full D... computer laptop unusable
I have a HP Pavilion dv7 laptop... computer. Two months ago I saved mistakedly C drive to D drive. I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK. Has nothing on this subject. Yesterday, I received a message stating that resources were low. Computer has crashed just after that. The computer turns on with only a black screen. Pressing F8 does not start in safe mode as it does on my PC. Can someone help me? Thank you!
Hi SteveKinney,
· What version of Windows is installed on your computer?
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: Start in safe mode and do a System Restore to a point before the show.
See Advanced startup options (including safe mode) for more information about starting in safe mode.
Method 2: See the following articles and check if the problem still persists.
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
See also the article mentioned for more information:
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
I hope this helps.
Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor. About $200.
-
Lose connectivity to the virtual computer on your laptop when you are disconnected from the network
Hello
I have a laptop with a Windows 2003 virtual machine (VPC 2007) with IIS 6.0, hosting a Web site for testing and development.
Using Dreamweaver and navigation on the site of the XP laptop (VM host) works very well when the network cable is connected.
Interestingly, this will work, but VERY slowly when plugged into an empty network switch.
The virtual machine has the laptop computer adapter selected to work. I tried to use a loopback cable and it did not work. I also tried to add the MS Loopback Adapter but not had any luck with that when you set the virtual to use.
Please can I have some suggestions, laptop user wants to work on this site with the virtual machine when you are away a network connection.
Thank you
Tom
Hello
Try a static IP on the same subnet to re-branded to map of loop back on the virtual machine and the host.
Make sure that the subnet is allowed through the firewall.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
SE error message "Windows Explorer has stopped working" when you click on network and sharing Center
Original title: Windows Explorer has stopped working when I click on network and sharing and also...
Hello technical savvy people!
Windows Explorer stops working when I click on network and sharing, and also when I click on system.
-Otherwise, I rarely get this little automatic.
But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
nor know how my system!Can you suggest healings?
Thank you for your attention,
marlem388Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below and see if it helps.
Error: Windows Explorer has stopped working
Hope this information helps.
-
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
I have Windows Vista 32-bit 2.4Ghs HP M91501, I had to reformat due to the error of hard disk. After formatting the PC, I went online to play or surf the internet is slow. I move fast and Lupe moves. I tried to highlight something and it takes up to 20 seconds before it highlites the message. When I try to play Call of duty online I play in slow motion. Called Charter they did a speed test shows speed 11 Mbit/s download and 1 Mbps of download speed. All the solutions to this important really appriciated your feed back...
I hope that Super Antispyware has given you the opportunity to remove those things. Since your initial Malware scan came clean, it is likely that located SuperAntispyware cookies only track, which are odious, but generally not a threat from System.
It is possible that you have apps which unknown to you, that run automatically in the background whenever you start your program. It is good to check if they are legitimate and necessary to launch when you start your PC.
Start button, click on you. In the run box, type: msconfig.exe
A System Configuration tool runs. Go to the Startup tab. You will find a list of applications that are set to run every time your PC starts. If you recognize all of them, use Google to help identify their purpose. Many times, you can open the application that is in question and prevent the application from starting. For example, on my system, I see that Java runs once more a verification tool to update each time you start. In this case, I can set my preferences Java Panel, select Java and uncheck automatically search for updates.
I also use OpenOffice and it wants to run a startup of service to reduce the time that openoffice requires to open. I don't really want something constantly running in the background to save me a few seconds to open the application. Then I go to Google to find out where the switch is to disable this "feature".
If you have unwanted applications running in the background, it is best to either uninstall, our to disable the option that allows them to run at startup. Although you could definitely "uncheck" the application through msconfig.exe, it is essentially a tool of troubleshoouting and not intended for the struggle of the apps (even if you do).
You can always uncheck/check again on this list to see their impact when you then restart your PC.
Once you have verified that apps that are set to start, you can run Windows Task Manager and scroll elements in the process and Services tabs to see what is running. The Services tab can be pretty intimidating to investigate on (there is a lot of misinformation the ' net), so if you are unsure about the services listed, it is best to ask or to jump on this area.
-
Error "Windows explore has stopped working" when you open the file in my documents
Original title: opening a file in the folder my documents
Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?
Hi dalintn,
1. What is the file format of the document?
2. are you able to open documents from other locations?
3. did you of recent changes on the computer?
Check if the similar problem persists when you access the document from any other location on the computer.
Method 1
This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
If the previous step fails then I would suggest that you do clean boot and check.
To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
When I open Firefox, it goes into full screen mode
I can't change the mode full-screen without completing the program even if the Task Manager. When I open Firefox, the browser will not allow me to enter a search option, or it will allow me to leave the program... the 'X' in the upper right corner is
-
Can I Exchange my iPhone for a different color?
I have 6 s silver 64 GB iPhone can I get an iPhone with the same capacity but different color?
-
Updates (optional) must be blocked if the essential addons are not yet compatible
Example: I depend on Roboform to maintain several hundred secure passwords unique and credentials of the user. Updates to firefox often break the addon. I should be able to say thank you to any updates until the addons have caught up. At the present
-
The site has no icon for printing and other aspects that normally appear in the upper part of a browser page. I see no way to add this. This has happened Each time Firefox opened
-
15 - p111nr: BIOS Admin password reset
Hello, I need a BIOS reset password. The current stop code is 5C533F4A. I tried https://bios-pw.org/ and the results do not work. Thank you. -Timothy