Computer help is stuck in the closed loop!

Similar Questions

• How to measure the speed of the funnel without the closed loop of the report?

  We seem to be in trouble, we want to move to 10 Eloqua and/or get the closed loop, tool of reporting, but we have to wait. However, we still really need to be able to measure our funnel and speed into the funnel. So did he do this without the help of eloqua fancy reporting tools?

  To calculate the speed you need two things:

  (1) steps defined

  (2) a date stamp for each step, you're trying to follow a long time.

  I've seen customers calculate the funnel using their CRM speed by writing a date to a field on the contact record and then report on these dates.  For global directional numbers I've seen customer on created lead report / month, then had a date on the contact record to identify SAL in a period of time, following by pointing out the standard option.  This is not one to one, but can provide valuable guidance.  To be precise and complete the picture, you would need MQL dates and SAL on the contact record, and your opportunity process will need to have associated contacts.

  On the product side, income Suite is available on E9.  No need to wait.

• Windows is stuck at the "Closing Windows" screen

  Hello:

  I'm having a problem with the Fusion 4.1.3 on an iMac 2010 10.7.3 running. Windows XP is stuck at the "Closing Windows" screen. What can I do to complete the procedure to stop and then restart Windows?

  Thank you

  Post edited by: JP7469

  Try to do a forced shutdown... Virtual Machine menu > Option key > Force Shut Down

  Take a look on: switch Power controls from the default Options

• Stuck in the update loop

  Recently I have got stuck in a loop of update of Vista, to do an update, in which he will update 3/3 0%, then stop start etc. I was able to fix and restore to an earlier point using my recovery disc and repair mode.

  Here's my question, how can I avoid this in the future while still making updates. This has happened a few times that I've corrected by removing the updates, I thought that may have caused the problem, and then on the day that the above problem happened.  Now I have a large number of updates, is there a way to fix this problem or am I rimmed? I do each update one by one, if it sticks back and remove it? Seems like a lot of work to keep it up to date.

  I could simply ignore the updates but that seems silly. Any help would be appreciated, thanks.

  It will take a little time to do it:

  Here's how to uninstall an update (or make your system restore), change your settings to find the problem of those who and how to hide an update.
  There is no easy way to do it, unfortunately:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Stuck on the infinite loop of auto repair

  Hi guys,.

  Ive had a problem with my computer. I have the alienware aurora r4 and have and issue with blue screen and auto repair mode.

  The real problem is really the mode of auto repair. What happened is that when I did a windows update it ended to give me a bluescreen during loging screen when I start the computer. After 3 restart put me in auto repair infinit loop and since then I can't get out, not even will lauch and im safe mode don't really know what to do.

  There is no problem of harware, I run the ePSA to confirm this. but the main reason is that it is the second time this has happened to me. the first time windows upated this month he did the samething, but I would get blue screen after login. How to solve this problem the first time, is that I restore my system to a certain date, when I didn't have this problem. After this, I turn off the windows upadte until I get more information one why its done 2 days ago, it is accidentally turn on by my antivirus or maybe accidentally by me.

  Now it is stuck on this infinite loop for auto repair and I can't do a system files because it must be done in safe mode, or need to disable launch beginning of antivirus (not exacly how his writings sound penultimate option aloong SafeMode in windows 8.1)

  What I have to do is stop mode auto repair, so that I can operate either in safe mode or disable the antivirus at the beginning so that I can restore my computer to a day where it was working fine. The computer has access to the command prompt, so any code that can disable or ask the system that he has never mistake might help.

  There is a file that I really need to recover from this computer and also need to use this machine. Any help is appreciated

  Thank you

  You can get a better response if you re - post it in the forum of the Microsoft OS.

• CDROM is stuck in the closed position, how do I open it manually?

  door cd/dvd rom

  is stuck w/switch on that Panel fell I put on, the door does not open

  Hello

  1. you are using a laptop or a desktop computer?

  2. What is the number of brand and model of the laptop or desktop?

  3. what operating system is installed on the computer?

  If you use Windows Vista or Windows 7, you can try the steps mentioned below and check if they help to resolve the issue.

  (a) restart the computer.

  (b) if the keyboard is equipped with a CD/DVD eject button, press it. The Eject key is usually placed by the volume knob and is marked by a triangle pointing upward with a line underneath.

  (c) in Windows 7 or Windows Vista, click Start, and then click computer.

  (d) right click on the drive icon of CD-ROM or DVD that is stuck and then click on eject

  (e) if the CD or DVD drive door button is a bar long clear plastic on the front of the computer, press firmly on the right side of the bar. Some models have a button on the front panel of the computer to the right of the door to hinge. Press the button to eject the disc.

  (f) if the drive door is covering the door of the real and made part of the case of the computer, open the door which is part of the computer case and press the eject button on the front of the player.

  (g) restart the computer and press the button to eject at the front of the car when the first screen appears (before Windows starts). If the door opens this way, but does not open in Windows, other software takes control of the driver CD. Try to stop or configuration of any software programs that create records or control the CD or DVD drive

  If the steps above do not help, you can contact the hardware manufacturer for assistance.

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Marshmallow stuck on the boot loop after encryption

  Hello! I have improved my motorcycle G 2nd Gen to Marshmallow Friday. Today, I chose the option to encrypt my phone for security reasons, and once I chose the model and it restarts, it is stuck on the boot animation. Unlocking scheme but then returns the boot animation shows and pass. After more than 4 hours, I tried to enter the quick recovery and it says that the device is locked. I have tried factory reset without the quick recovery result. If I turn off the phone it boots on its on and so on and so forth.

  The model is XT1068.

  Activation of the encryption on the 2nd Gen Moto G is not a good idea, unless you are really paranoid. It's too slow as the CPU supports a few commands that deal with some of the encryption at the hardware level.

• I don't want windows 10, but I'm stuck in the update loop - Help!

  I have tried to avoid the update of Windows 10 and was doing a good job, until one day I came back to my computer to find the middle of the update of Windows 10. I panicked, somehow managed to cancel and thought that I had won it.

  Fast forward a week or two and my computer tells me to restart after the update. It's somewhat normal, I usually told to wait and he does. Not this time. He returns five minutes later telling me that it will restart in 14 minutes if I want to or not. I can't avoid it. It restarts. I have to go to work. I just find that it is just rebooted again later. I have to go back, I hear from my mother that she has restarted several times while I was away. I came home and closing it down properly and went to bed.

  Today, it's the same thing, it force restarts every 20 minutes. I look for things on the internet and eventually check the updates. There are tons of failed attempts at upgrading to Windows 10 (which, remember, I never authorized to do so). I have 10 minutes before it goes to the next round. I'm next to me. I know not enough about computers to speak with her directly and make the troubleshooting thing I found on the internet that involves the registry and to be honest, I don't REALLY want to not Windows 10, so I don't want any solution that leaves as the result.

  What can I do? It's time for me to just suck it up and buy a Mac? I am upset to forced into what I am quite certain I will never buy another Microsoft product again (and this is after growing up on Microsoft and he preferring Apple). I feel so betrayed and powerless. I don't want it to end on a bad note Aussie. Is there something I can do?

  Even if you use another solution to prevent future attempts to upgrade, read the last two sections upgrade to disable Windows 10 - WiKi to see how to clean up what has already been downloaded to your computer.

• App Store stuck in the update loop

  I use El Capitan 10.11.6 on a MacBook Pro for mid-2015.

  The AppStore automatically updated the operating system and a few apps today (2016-09-13). But the badge on the dock of the AppStore icon remains stuck at '1' indicating a waiting for update. This update uninstalled for iTunes 12.5.1.

  By clicking on the "Update" button next to this entry causes the app download slowly. Once the download is complete, the led shows "install...". "- but only for a few seconds. The installation runs. The badge of the AppStore never clears. The App Store still shows the 12.5.1 iTunes update is available. However, there is apparently no way to install it. I can click on the buttons to update again, but then he has just the same: downloads, tries to install and fails without error message.

  What now? I checked the obvious culprits (for example in ensuring the app iTunes is not open, reboot, etc) but no luck.

  FWIW, I also have a version of Parallels of El Capitan, which runs on the same machine. He knows exactly the same problem.

  Thank you.

  Restart your Mac, then check the App Store for the update of iTunes.

  You may resume the download.

• Help! Stuck on the activation screen

  Hello

  My grandmother recently asked me to 'fix' his iPad as he kept prompting you to enter the password of his apple whom she did not know ID.  She is 75 years old and bought the iPad two years ago. The iPad uses a recent version of iOS (not sure it exactly, but certainly later than iOs 7).

  When I went into the settings I saw that the Apple - ID for the purposes of this post "[email protected]" - has been used.  Or my grandmother or I knew the password to this ID from apple.  It hurts (and I appreciate this has been my big mistake) thought that the best way to solve this problem was to reset the iPad to its factory settings and then it let me enter a new Apple ID that I have created for her.  Of course, it was the wrong thing to do, but I didn't know it at the time.

  So I reset the iPad and then, when I started, I was introduced to the activation screen it says something in the sense of "this feature must be enabled using the apple"[email protected]"ID."  My grandmother had only an e-mail address in his life, so it must be the identifier apple "[email protected]" that I mentioned above.

  Thus, after a long effort, I managed to understand the email to the email account for the @bigpond.com of my grandmother, then joining I was able to change the password of the apple "[email protected]" by using the function "forgot my password" ID on the official website of apple.

  Now that I had the password "[email protected]" I went back to the activation of the iPad screen and entered the Apple ID and password... only to be tackled with a pop-up message stating something along the lines of "iPad cannot be enabled with this account".

  I don't know what to do now.  My grandmother never had an e-mail address in his life, and the iPad tells me that it requires the ID "[email protected]" to activate it.  It must be the ID '[email protected]' because she never had a single e-mail address and the clues given (for example, "[email protected]") corresponds to "[email protected]".

  I'm completely at a loss what to do from here.  My grandmother has no receipt when she bought the iPad and neither can afford to buy him a new one.  Any help would be greatly appreciated.

  Thank you, Tom.

  If I understand what you're saying correctly, and I think I do, just because you successfully reset the password for Apple ID your grandmother, does not mean that it was the e-mail address that was used to operate the device of origin. Is possible that someone else it enabled for sound using their Apple ID?

• help im stuck on the choice of operation on which we go for joe Collins

  Hi my name is joe collins iam I need some advice because I have a collection of windows xp pro windows home ed operating systems

  Windows 7 Professional and windows 7 ultimate and now windows 8 will be released and iam now stuck for choice of OS iam stuck

  on which we go for joe Collins

  Hello

  I suggest to install Windows 7 and then you can upgrade it to Windows 8.

• Statement by the closed loop and Salesforce CRM

  Our business model has with a unique economic engine, the Architectural specifications.  Architects are essential but they never actually buy our products, simply specify them.  Our marketing ops team is curious to know if anyone has implemented CLR with SFDC while noting in campaigns for contacts who are responsible for potential revenue.  I think that we are creating a stage of opportunity only for architects who will assign a probability of 100%?  It can be that simple, although it seems to be, I wanted to ask this question to the community of Topliners.

  I appreciate all the comments accordingly.

  Seems that you try to get a number of influence for a channel of indirect sales... not easy, nor a perfect science, I don't think.  No matter what CCTV make you a statement should identify the architect as a source of reference for little variety on the opportunity.  You would be then bound back that connect to any campaign associated with the architect response activity.

  Since it is an important influencer your engagement metrics are going to be important.  The most immediate measure of success will be if they consume your content.  The next will be if they share your content.

  Others have example of how they are tracking the results of the campaign for indirect sales channels?

• Stuck in the HP configuration menu, when I install my 760.

  I have a problem when I start my computer. I have a HP H8 - 1020. So, I went to install my new graphics card which is an EVGA GTX 760, I changed the power supply to a CX600M of Corsair, but when I start my computer I'm stuck on the HP Logo/setup menu, then if I wait until there is a series of beeps. After these beeps my screen goes black. Now, if I reinstall my old graphics card, it starts without a problem and I can continue to use my computer.

  Model of card - http://support.hp.com/us-en/document/c02839589

  Any help/advice would be great.

  -Matt

  This isn't a new issue, see here with the HP8-102 x series.

  Big_Dave had a suggestion:

  On this post, ask the OP how many beeps are heard between breaks?  You can go to the partner Services media library, find the series, then watch motherboard diagnostics codes.

  What is suspicious is that the card EVGA 760 is backward compatibility with a motherboard no UEFI.  I have a NVIDIA 660 in my PC FL and had to get a fix to allow him to work with UEFI. I asked EVGA why the patch has not been incorporated in the new Council and they said it was to allow backward compatibility with older non - UEFI PCs. So I suspect the 760 has the task and is not compatible.  EVGA will have to confirm this suspicion.

• HP envy: stuck on the black screen

  Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

  Hi @Jaxibrey,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

  Here is a link to computer does not start for Windows.

  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.