Windows is stuck at the "Closing Windows" screen

Similar Questions

• HP Pavilion 21-h010la stuck in the HP splash screen.

  Hello. I'm having a problem with my computer. When I try to turn it on, it gets stuck in the HP loading screen. I used the PC Hardware Diagnostics UEFI and he says that it meets the test, even if the SMART hard disk check returns a WARNING. The program didn't give me all the instructions to fix it later. Do I need to change?

  Hi there @mafi11235,

  That the Forums are with you!  It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer is stuck on the HP logo at the start, and that he was a WELL-INFORMED driver error message. I'm happy to help you with this.

  If you get a SMART disk error, so it is normally a warning of impending failure, based on testing the drive runs itself. This could mean the drive is defective or shows signs of failure, but in general you want to replace it and try to make a backup of your data as much as you can, until it was inaccessible.

  You have recovery media or already made for Windows 10 recovery disc? If this isn't the case, you will want to get some for your system. Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• T420 stuck on the startup Lenovo screen

  Hi I'm new to this community, so I would like to applogise if I have something simillar to mist (I checked some but not solved my problem).

  I have a thinkpad t420, I bought a used one. It worked great, and I bought a friend, that I trust. I installed an SSD, was usnig Linux, and everything worked for a month. But then I bought a HARD drive caddy and replaced the CD-ROM. After that my thinkpad has worked for a day (although he does not recognize the second HDD). The next day, I tried to find BIOS for some parameters and after I restarted my laptop, it was stuck on the startup Lenovo screen, reboot loop. I tried:

  -removing and replacing the caddy with the CD rom.

  -replace my SSD drive,

  -replace the RAM (two locations),

  -Reset BIOS,

  -launch a diagnostic CD (but it does not start, nor can I boot from a USB key)

  My google search showed that he could bi a problem with one of the USB pins inside one of the ports (short circuit or something like that), but I couldn't find any damage. So I'm thinkig that the motherboard may be damaged, but I can access BIOS, but it's the only thing I can do with it.

  I'd be thenkful Walker of any advice or help, before moving on to official Lenovo service for help. Thnak you!

  Z.

  You can always source a new mobo on eBay, or any part on your T420 to recover some costs.

• Stuck at the start-up screen

  Hi, I use Jdeveloper 12.1.3 and the extension of the ADF Mobile on Mac OS X Mavericks. iOS 7.1 and Xcode 5.1.1

  If I make an application with a HTML file and deploy Simulator iOS, the app works great.

  If I apply with an AMX-page the and deploy on iOS Simulator, the app is stuck at the start-up screen. "Loading...". »

  Any ideas? I tested the "Navigation" public sample and deploy and works very well.

  Concerning

  Thomas H

  I looked in the debugging using the iOS Simulator. The problem causing my problem was not supported for encoding. I used ISO-8859-15. Changed to UTF - 8.

  Thank you for you detrilles Sudipto link on debugging =)

  -Thomas H

• 421SO HP G61: stuck at the blue login screen

  Hello.

  I have a problem with my laptop, a model of 421SO G61, and the question is showed in a Youtube video.

  Link: https://www.YouTube.com/watch?v=Y7FIDt9SonQ

  The problem occurred after that I left my cousin played the Sims 4. She said that after she closed the Sims 4, a window appears and it has clicked away and stop the laptop. The next day I started it and it got stuck on the screen that is shown in the video. She unfortunately can't remember what has shown the window pop up.

  I tried to reset hard, leaving the rest of the laptop computer for 24 hours to reset the BIOS settings and to test (who first succeeded and only shows not all errors) and leave it on for 1 hour + to try to let it load.

  I have a theory that the hard drive is ruin or the operating system does not sort properly load.

  As I can't access the hard drive and the data in it, how this issue can be fixed without losing all the data important and meaningful; for example images?

  Thank you!

  @22Bebz,.

  Hello and thanks for posting back.  You can try to do a full system recovery and if that fails, you should contact HP support for service options.

  HP computers - performing a recovery of system HP (Windows 7)

  To contact HP support, please use the following link.

  Contact HP support.

  Thanks again for posting and have a great day.

• HP Pavilion P6724IT: Hp Pavilion P6724IT stuck to the HP splash screen after the installation of the new VGA

  Hello people.

  I buyed a new VGA, a Gigabyte GT740 2 GB DDR5, before I had an Asus GT630 2 GB of DDR3 memory and had no problem with it.

  After you mount the new VGA, I noticed that the computer gets stuck to the initial start with the HP logo screen.

  Can't even get to the BIOS, but if I remove the card and use the igpu it is all ok.

  I tried to update the bios with the latest version on the HP website (v.7.15) and nothing.

  Tried to install it with Windows 8.1 and windows 7, nothing.

  I tried all the things I found on the net of people with the same number, nothing new.

  If I'm pretty quick and I press certain keys we Gets the black screen and stuck in any case, do a few beeps and then go to a kind of sleep and if I keep pressing a key, it makes little noise Cracklin'.

  In fact I can't afford a new motherboard so I wanted to know if I can find a solution to the problem, because it's really frustrating and I spent much time trying to understand with your help.

  Sorry for my bad English!

  Hope someone can help me

  See you soon

  @wb2001  Thank you for asking me to review this theread.

  ZeroProsekt,

  You must answer such questions as published by the wb2001.  If you do not know the answers, then contact the manufacturer of the graphics card and ask for more information on the graphics card of specific model you are trying to use.

• Aspire V5 - 122p stuck on the Acer splash screen

  I did a factory reset on windows cleaning 8 using the acer recovery option.  Everything was going well until I tried to update to windows 10 (I did the windows free 10 earlier on this machine without any problem.).  After you have installed windows 10 and the system has been updated, the system said that it was necessary to restart and now it does not start at the top.  It is stuck on the acer screen boot.  I tried all the options in the recovery section that opens after 2 failed charge.  It crashes just on the acer screen. It won't let me boot to safe mode, I can't reset, I can not restore. I don't like on the files on the pc, I just want the pc to be functional again. I have a good restore image on a USB key, but the only way it works is within windows with the acer recovery option.  When I try to restore or repair options, it just says: this pc is not repairable.  I even tried tried support for windows 10 installation/recovery and recovery using a USB drive and I get an error on it.  I tried everything I can think of.  Currently, the laptop is a brick.  Anyone got any ideas on a way to fix this thing do start? Thanks in advance for any help.

  Hello

  I select custom install, not upgrade or repair the USB. When you reach the disk selection panel, select the partition where you had previously installed windows and then click the format button which is below the selection window. After formatting, select the partition to install windows.

  Do it with a windows 10 USB installation. I think it should work.

  Be careful, because in this way, you will lose all the data that is on that partition.

• T400 is stuck on the Thinkpad splash screen

  No laptop computer 11 months, no problem, I woke to find the computer stuck on the startup screen. I tried to restart, has released the battery, tried pluged, unplugged and continues to stop at the start screen. Any suggestions?

  1. check your USB ports and see if they are damaged or bent pins or pins to touch others.

  http://Forum.Lenovo.com/T5/R-L-series-ThinkPad-Laptops/R400-R500-won-t-boot-past-the-logo-screen/TA-...

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• Start stuck at the Dell logo screen

  Hello

  I have an inspiron nine 5447, which was working fine until yesterday. If I try to start now, it's just stuck to the Dell logo and I can't go in the BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at the same screen of the Dell logo. Can someone help me with this.

  Thank you

  Nikhil

  Hi Nikhil,

  External devices (except AC adapter) connected to the computer. If so, disconnected the and try to turn on the computer.

  If it's the same situation, and then turn the computer off. Key down, then and now the power of FN key on the computer.

  In the case, the computer is blocked at the Dell logo. It's a hardware problem, contact Dell Technical Support in your region to replace the parts.

  I hope this helps...

• Satellite T130 - stuck on the initial Toshiba screen (Bios)

  Hello

  I got a T130 and recently tried to start with a key USB - but I have not even that far--basically since trying to press F12 to access the boot options it will not go passed the initial Toshiba screen.

  I tried to turn off, remove the battery/AC etc. When you press F2 it said entering the facility, but nothing has happened - I also replaced RAM memory modules.

  Any ideas?

  Thank you

  Maybe the BIOS is screwed up. I mean that if you are not able to enter, it may be BIOS problem.
  You have defective or what?

• stuck on the refresh database screen

  my brother gave me his used sensa, and I downloaded many songs I
  could, so I expected to take a long time the database 'Refresh '.
  screen, but I had all night, and it has not yet disappeared now. so
  Basically, its actualization is rest on the database for several days... I need help
  with that, I can turn it off and turn it on, but it remains on the
  update the database
  I searched on the internet and the faq, but nothing helped, so I
  have no idea what to do

  I even tried to use the thing, what he told me to download, but it does not work because my mp3player connects to the computer.

  Help, please

  found the solution on the web, just had to search on google, I think it's working now, I hope it explodes now<>

  This problem could be caused by file corruption or errors of system on the device.

  We should be able to fix your drive. Unplug the drive from the computer when it is connected.

  Please copy and paste the following link in your browser of web address bar, and then click OK or press your enter key. When you are prompted, choose the option to save the file on your desktop.

  http://www.SanDisk.com/assets/file/D...fw01.00.12.exe

  Once you have downloaded the file, please follow these instructions.

  (1) double click on 'My Computer' so that you can see on your screen.

  (2) turn off the player.

  (3) on top of the player is a Hold switch, move it to the right (toward the headphone jack) so you see Orange.

  (4) on the left hand side of the player is a 'Save' button, press and hold it when you connect the player to the computer. Continue to hold the record button until you see a new icon in "My computer" called 16 MB FORMAT. Once you see this icon, you can release the record button.

  5) double-click the file you downloaded earlier and run it. Follow all the on-screen instructions and when you get to the prompt where it asks you if you want to format, click Yes. Once this is done, click Finish.

  (6) disconnect the player and watch the screen. Several things will be displayed, and when you see Key Lock, system shutdown, move the Hold switch on the back upstairs to the left.

  (7) turn on the player and watch the screen. If you see a mistake to refresh database fail, you will need to follow steps 1 through 7 again until you do not get the error. If it doesn't work the first time, can be up to 3 times to make it work.

  Please inform about the results.

  If you have any other questions and concerns please let us know, it is our pleasure to help you.

  Best regards
  Kenneth Arthur v.
  SanDisk technical support

• Windows 7 install stuck to the language selection screen

  So I recently set up my own PC and tried to install Windows 7 Home edition. Everything would start to screen selection of language very well, but if I select anything with the mouse or keyboard that was going to happen. I checked all USB ports and they all work when I go to the BIOs menu, but they are still hooked on what an OS install screen. Currently, I have a 2 TB hybrid drive and a 120 GB SSD inside as well as an optical drive to read my installation disc. Any suggestions?

  Thank you man. In fact, the issue has proved being in a simpler way that I thought. I just had to enable the PS/2 controller.  I appreciate your help.

• Computer not finding networks, stuck on the Logging Off screen in Vista

  For the past two weeks, if I simply close my laptop while it is running, most of the time when I try to open it up my wireless network does not connect automatically. I have to click 'Connect to' in my Start menu and manually connect to the network. The only problem is, sometimes it will fail to find a network and when I try to manually go to 'Connect to', it does nothing. Nothing comes up at all. I have to restart my computer. Once I try to restart, it sticks on the screen "Logging Off". I also tried to disconnect just opened a session back, but it's still stuck on this screen. I am then forced to make a hard closed down by holding down the power button.

  Any ideas?

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Hello
   
  1. you broadcast the SSID of the wireless network?
  2. have you idea of changing the settings of the preferred wireless networks?
   
  Method 1.
  Try to change the order in which your computer connects to the network.
  The list of networks connected to before is sometimes referred to as your preferred wireless networks or your preferred list.
  a. open manage wireless networks by clicking the Start button, click Control Panel, click Network and Internet, click Network and sharing Center, and then, in the left pane, click on manage wireless networks.
  b. your saved wireless networks is displayed. To change the order in which your computer connects to networks, drag the networks upwards or downwards in the list.
  c. to change preferences for the network, right-click the network, and then click Properties.
   
  Method 2.
  Also, check out the articles below and check.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx
  http://support.Microsoft.com/default.aspx/KB/929661
  
  Method 3.
  Also the question of trial in the State of clean boot and check. You can also check the shutdown problems in the boot.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 4.
  Also check the eventviewer on stop error logs.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.