Computer HP laptop 14-r204nx: driver missing

I have hp laptop laptop 14-r204nx with Windwos 7, so I am struggling to find the following drivers.

Network controller

PCI device

PCI Simple Communication controller

SM Bus controller

(USB) Universal Serial Bus controller

Kindly help me in this regard.

Hello:

You need these drivers...

PCI device:

This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

File name: sp68616.exe

PCI Simple Communication controller:

This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

File name: sp69592.exe

SM Bus controller: NOTE: first install this driver and restart.

This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

File name: sp69573.exe

(USB) Universal Serial Bus controller:

This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

File name: sp70030.exe

Please follow the following steps, so I can understand exactly what model of wireless card, they put in your laptop...

Go to Device Manager and click on the marked device network controller that should the drivers.

Then click on the Details tab at the top of the control of the network window.

Now, you see a drop-down list of property and it is set by default to the Description of the unit.

Drop down on it and select the second item in the list (Hardware ID).

After the first string of characters that start with PCI\VEN.

So I'll post the link to the driver you need.

Tags: Notebooks

Similar Questions

  • my computer hp laptop 500 GB drive d n c r full and I did anything knowingly to make this help please?

    My computer hp laptop 500 GB windows 7 has exceeded on the c drive and d drive so... There's something magical that I can cut two disks of %50..I don't have no idea who occupies the space... but I have over 70 and I'm thinking there is the answer... help please?

    Hello

    Your computer, your data. I don't know which files you need, what files do. You may need to spend time checking them and delete them manually. You can use Windows Explorer and sort by size to check all the big files first.

    Kind regards.

  • HP 240 G4: Please tell me this driver to install to solve my problem of mouse for computer pc laptop (send me url)

    I need help with my laptop, this model is hp 240 G4, Intel PDC 3825U 1.9 GHz, 4 GB DDR3 memory. The problem started after I formatted and reinstalled my pc with win 7, 32 - bit; mouse laptop (I mean the mouse attached to my laptop) is not working properly. Well Yes, it still works, but I can't scroll pages upwards or downwards with her and I can't zoom in or out also. What should do? Help, please.

    Yes.

    Just double-click to run the file and follow the on-screen instructions.

    The installation should be automatic.

    You may need to restart the computer after you install the driver.

  • HP 2000 model C2M21UA #ABA: drivers HP 2000 computer laptop model C2M21UA #ABA missing for windows 7

    Computer HP laptop, 2000 was probles of day 1, very slow to respond. Came loaded with Win 8. Discovered on the free 'upgrade' to Win 8.1. Download and install 8.1 'upgrade. A took about 14 hours to download and install. After the installation the computer to rotate between a pink screen, a red screen and deskop, all cursor shows the symbol of the "expectation." Cursor move with the mouse, but that's all the computer would do. Bailed out on Win 8 series installed a copy of Win 7 32 bit, because that's all I had. Now computer works, but does not connect to the internet, said ethernet controller, network controller, and PCI drivers are absent. I have a work computer that I can download the drivers with if they exist.

    Controller Ethernet hardware ID:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_169A103C & REV_05

    PCI\VEN_10EC & DEV_8136 & SUBSYS_169A103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    Network controller hardware ID:

    PCI\VEN_1814 & DEV_539B & SUBSYS_18ED103C & REV_00

    PCI\VEN_1814 & DEV_539B & SUBSYS_18ED103C

    PCI\VEN_1814 & DEV_539B & CC_028000

    PCI\VEN_1814 & DEV_539B & CC_0280

    Device PCI hardware ID:

    PCI\VEN_10EC & DEV_5209 & SUBSYS_169A103C & REV_01

    PCI\VEN_10EC & DEV_5209 & SUBSYS_169A103C

    PCI\VEN_10EC & DEV_5209 & CC_FF0000

    PCI\VEN_10EC & DEV_5209 & CC_FF00

    I hope this is the correct information, you need to determine what drivers I need. I don't even know that the 32 bit OS is compatible as the 64-bit computer.

    Someone told me that winning 10 will be made available for free to people who were not satisfied with the victory 8, OS 8.1. Anyone know if this is true?

    Anyway, any help would be greatly appreciated. It would be nice to be able to use this computer for something other than a paperweight.

    Found the driver help IDing the material.

    http://www.driverscape.com/download/RALink-rt5390r-802.11bgn-Wi-Fi-adapter

    I hope that it is a reliable source. There were several there, I found one that worked. Never would have got there without you IDing the network card for me. Thank you!

  • my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    original title: printer driver

    my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    Is what printer? Where did you get the driver?

    That you download and install the * good * driver for him? It must be for Windows 7 and Windows 7 32-bit or 64-bit Windows 7, depending on what you are running.

  • Can I make a password reset the flash drive to reset the password on my computer dell laptop?

    OT: reset password

    can I make a password reset the flash drive to reset the password on my computer dell laptop?

    Yes here's how:

    http://www.Dummies.com/how-to/content/how-to-create-a-password-reset-disk-for-Windows-81.html

  • Computer HP laptop 1045dx-M6 won't recognize hard drive

    I have a laptop HP M6-1045dx who has a problem with the recognition of the main hard drive. I tried several hard drives (one of them had windows 7 installed top for the laptop) and none of them are recognized by the laptop. I'll even in the verification of the HP hardware by pressing F2 and it did not recognize. When he did recognize, Windows 7 would freeze and then the blue screen of death. When I want to reactivate the laptop, the hard drive is no longer recognized. It would, in fact, the cable from the hard drive or is - what a card mother garbage? Help, please. Any help is greatly appreciated. Thank you very much.

    Looks like the motherboard, I'm sorry to say.

  • Satellite A30 - ACPI driver missing

    Hello
    I have an old A30 that I just installed Win7 on. Everything is fine apart from a missing driver - unknown device ACPI

    In Device manager the hardware ID is ACPI\CMP0101

    Now this laptop fan lights not bad and she has a random problem to close without reason. I checked the fans and they are clear. In my view, that stops can be connected to this driver missing because it can control the temp/fans that stop it overheating, and then I could be wrong...

    I would appreciate any help and advice

    Thanks in advance

    mcdodd

    Hello

    Are you sure that you want to use Windows 7 on this computer laptop oldie? In my opinion, you should be happy with a preinstalled OS to Toshiba. There are all the drivers and tools pre-installed and you don t have the stress with the driver installation. You can have fun with your laptop :)

    As you can see in another thread, you must reinstall Windows to solve this problem:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

  • Pavilion 15-n201sk: driver missing

    computer hp laptop pavilion 15-n201sk windows 7 64-bit

    driver missing for:

    1 - Ethernet controller

    2 - Bluetooth controller

    3 Intel (r) 8 series xHCI HC - 9 c 31

    4. PCI device

    5 - video controller

    6 - unknown device

    Hello:

    You should be able to use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

    http://support.HP.com/us-en/product/HP-Pavilion-15-N100-notebook-PC-series/5436989/model/6422011/drivers

  • Pavilion g6 - 2400ca: installing drivers for windows 7 on the computer pavilion laptop g6 - 2400ca

    Hello

    I just installed windows 7 instead of windows 8 on my computer pavilion laptop g6 2400 ca, and I'm missing some drivers.

    Here is the necessary drivers, can help you please?

    Bluetooth controller:

    PCI\VEN_1814 & DEV_3298 & REV_00

    PCI\VEN_1814 & DEV_3298

    PCI\VEN_1814 & CC_0D1100

    PCI\VEN_1814 & CC_0D11

    PCI\VEN_1814

    PCI\CC_0D1100

    PCI\CC_0D11

    Network controller:

    PCI\VEN_1814 & DEV_3290 & REV_00

    PCI\VEN_1814 & DEV_3290

    PCI\VEN_1814 & CC_028000

    PCI\VEN_1814 & CC_0280

    PCI\VEN_1814

    PCI\CC_028000

    PCI\CC_0280

    Ethernet controller:

    PCI\VEN_10EC & DEV_8136 & REV_05

    PCI\VEN_10EC & DEV_8136

    PCI\VEN_10EC & CC_020000

    PCI\VEN_10EC & CC_0200

    PCI\VEN_10EC

    PCI\CC_020000

    PCI\CC_0200

    Unknown device:

    ACPI\HPQ0004

    * HPQ0004

    PCI device:

    PCI\VEN_10EC & DEV_5229 & REV_01

    PCI\VEN_10EC & DEV_5229

    PCI\VEN_10EC & CC_FF0000

    PCI\VEN_10EC & CC_FF00

    PCI\VEN_10EC

    PCI\CC_FF0000

    PCI\CC_FF00

    WD SES peripheral USB controller:

    USBSTOR\Other

    USBSTOR\RAW

    Hello

    Install:

    RALink Bluetooth 4.0
    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

    RALink 802.11 b/g/n
    http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

    Realtek PCIe GBE Family Controller drivers in the series

    HP ProtectSmart hard drive protection

    Realtek PCIE card reader drivers

  • Computer HP LAPTOP PAVI5-N258TX: used to stop Windows

    Im having a laptop for computer HP LAPTOP PAVI5-N258TX. I recently formatted, but now his habit shutdown. I installed all the drivers. But the Manager of computer displays that some drivers are missing. How can I identify missing drivers?

    Hi @Sanjaya22,

    Welcome to the HP Forums!

    It's a great place to find answers and suggestions!
    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    I see that you have recently reformatted the hard drive of your laptop and since then it does not turn off.  You say that you have installed all the drivers but device displays Manager some drivers are missing.

    You did all your Windows updates?

    If you reformatted via HP recovery, ran HP Support Assistant to facilitate updates of HP?

    If you have reformatted and used a disc at retail have you checked manually updates from HP.  You can choose the verification option now and it will scan your system and generate a list of software and drivers for you.

    Pavilion 15-n258tx software and drivers

    Then I'll make a HP computers - refresh your PC to solve problems (Windows 8).

    This will reinstall the operating system and should not affect your personal data.  I do not recommend that you make a backup of your data just to be safe.

    To say thank you for answering, please click on the thumbs up icon below.

    If this corrects the difficulty pleae tell people in choosing the solution provided.

    Good luck!

  • Driver missing cd DVD

    My cd dvd drive is missing. I tried to repair the windows, no results. I also tried to delete upper and lower filters, I only have upper filters, so this isn't the problem. Don't know what to do now? Running vista. Thank you

    What is your model of computer?
    Does powers on?

    For the office, check the wiring, Plug connectors?

    For laptops out there drive and reinstall.

    How to remove a CD/DVD to a laptop drive
    http://www.ehow.com/how_5801795_remove-CD_DVD-drive-laptop.html

    You can also try to test the drive on another computer.

  • How to format computer acer laptop?

    How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

    My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

    Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

    I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

    Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

    Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
    Thank you

    How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

    My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

    Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

    I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

    Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

    Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
    Thank you

    neww

    NeoSmart disk is to startup etc repair not reinstall

    the process of acer administers the process of full recovery to the standards of the factory

    you start from the acer recovery disk to start a reinstallation of vista, back to factory standards and follow the prompts

    problem with the acer recovery process, you will need to contact acer

    It's their recovery process

    http://www.Acer.com/worldwide/support/index.htm

    Walter, the time zone traveller

  • loss of files and hp software. Computer HP laptop g6 windows 8

    loss of files after windows upgade 8.1 and the installation of the updates of windows. also the loss of the hp software. Computer HP laptop g6 windows 8

    Pe1,

    Welcome to the HP Forum.

    The invitation to upgrade to 8.1 Windows comes from Microsoft.  Unfortunately, Windows 8.1 does not care what happens in your software brand in the upgrade process.  This is not limited to laptops HP - computers and desktops other brands may suffer the same consequences.

    You've probably discovered since your initial post you will need to return to your backups of Windows 8 to reinstall all personal files.

    You may need to install all the programs you have installed previously from original source.

    To install programs may include (and are not confined to the):

    • Browser (s) and/or bookmarks
    • Personal programs - Office games, you bought or downloaded from the Internet, e-mail programs
    • Purchased or downloaded from the store of Windows applications

    The upgrade process was able to destroy your Recovery Manager - that being the case, you will have to wear a support driver your computer Web pages look to see if you can find all the missing drivers.

    HP, software brand may be missing - and probably won't be available in the Support pages.  This includes software that may have been added to your computer as promotional or trial.

    Don't forget that everything that could have been on the computer when it was new won't be available in your Web support pages - it can be your Web pages don't supply not all drivers for Windows 8.1 - it all depends on the laptop model.

    If everything becomes too much and you want to go back and start over, use your recovery media to return to Windows 8.  If you did not once set, you might be able to buy a set of HP.

    Looking for recovery disks?

    What you might have done before upgrade to 8.1 Windows:

    Creation of recovery disks or saving a recovery Image on a USB drive (Windows 8)

  • computer HP laptop says bootmgr

    Can Hello someone please help me? My laptop says bootmgr is missing. I tried to put in the recovery of windows vista and windows 7 disc and the laptop does not have anythang. I don't know what to do now, f8 cause does not have anythang or any other key. I don't know much about fixing laptops so any help is useful thank you

    Hello

    Corrects BOOTMGR errors

    1. Restart the PC. The BOOTMGR error could be a fluke.
    2. Check your optical drives, USB portsand floppy disk for media players. Often, the "BOOTMGR is Missing" error if your PC is trying to boot from a non bootable drive, external drive or on diskette.

      Note: If you find that this is the cause of your problem and it occurs regularly, you might want to consider to change the order of boot in the BIOS if the hard drive is listed as the first boot device.

    3. Check in the BIOS boot sequence and make sure that drive hard fix or other boot device is classified first, assuming you have more than one drive. If the bad drive is listed first, you could see errors BOOTMGR.

      I know I've hit kind of on that in the above troubleshooting step, but I wanted to specifically call that you might have the bad hard drive listed, as a lot of BIOS/UEFI systems allow you to specify specific a particular hard drive be started from first.

    4. Reinstall all internal data and power cables. BOOTMGR error messages may be caused by the power cables or defective, loose or disconnected controller.

      Try to replace the PATA or SATA cable if you think it is may be defective.

    5. Perform a repair of Windows startup. This type of facility is to replace all the files missing or corrupt, including Bootmgr.

      Even if a reboot is a common solution to problems BOOTMGR, don't worry if it doesn't solve your problem. Just continue troubleshooting - something will work.

    6. Write a new boot sector of partition on the Windows system partition to correct any possible corruption problem configuration or other damage.

      The partition boot sector is an important element in the trunk so well treat if there is any problem with him, you will see problems such as error "BOOTMGR is Missing".

    7. Rebuild the BCD (BCD) data. As in the boot sector of partition, a corrupted or misconfigured BCD cause BOOTMGR error messages.

      Important: The following troubleshooting steps are much less likely to help solve your problem BOOTMGR. If you skipped all the above ideas then you may have overlooked a very probable solution to this problem

    !
  • Check the hard drive and other drive in the BIOS settings, then make sure they are correct. The configuration of the BIOS tells the computer how to use a reader so incorrect settings can cause problems, including errors BOOTMGR.

    Note: There is usually a setting Auto in the BIOS hard drive and an optical drive, which is usually a safe bet if you don't know what to do.

  • Update the BIOS of your motherboard. An outdated version of the BIOS can sometimes cause the error "BOOTMGR is Missing".
  • Perform a new installation of Windows. This type of installation will completely remove Windows from your PC and reinstall from scratch. While this will certainly solve BOOTMGR error, it is a tedious process due to the fact that all data must be saved and restored later.

    If you can't access your files to save, please understand that you loose them all if you continue with a clean install of Windows!

  • Replace the hard drive , then install a fresh copy of Windows. If everything else failed, including the facility clean at the last step, you are most likely a hardware problem with your hard drive.
  • BOOTMGR errors apply to the

    BOOTMGR issues applies to systems of operating Windows 8, Windows 7and Windows Vista only.

    Windows XP don't use BOOTMGR. The equivalent function in Windows XP is NTLDR , which produces the error NTLDR is Missing when there is a similar problem.

    Checkurtech

Maybe you are looking for

  • my printer is working, but it will not be printed in color and a new color cartridge is installed.

    HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

  • (Redirect) Possible to carry out work

    I have an Ispiron 570 and last year, I bought a dell graphics card, a Geforce GT 610, I realize that the computer is not a gaming PC, but it does the job, I was wondering that if someone could help me choose a graphics card that is a little better th

  • Blank thumbnails of passport blackBerry

    Some of my thumb nail pic are appearing in white. Some open some are not. I did a reboot and remove the memory card. Any ideas?

  • Background process untraceable on the event log service

    Hello I use a Windows 7 Enterprise system, ASUS X 99 I7-5960 X GTX Titan This is a whole new system. Recently, the spinning wheel "working in the shadows" near the cursor doesn't disappear. I mean he will start a few seconds after the start and just

  • 802. 1 X port management via SNMP

    Hello Could someone tell me how to disable 802. 1 X for the specific port via snmp command? That is to say, I can do it in the cli "not auto port of authentication control." But I need to do it in the form of "script" more. as we can disable/enable t