Computer is frozen mode System Check. It shows that he replaced bad Clusters

Similar Questions

• I can only start my computer in Safe Mode - system hangs on startup after installation of updates

  Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO

  After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.

  Thanks any help will be graciously appreciated... RA

  Hello

   
  Method 1:
  You can try restoring the system to safe mode and check:
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  You can consult the links for:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Method 2:
  If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• FireFox says Java is outdatedon my computer, but the control panel of microsoft shows that it is the what is the latest version with that?

  Firefox said I need to update Java. But I get automatic updates from microsoft in the Control Panel Add or remove watch it shows that I have the latest version of Java. And it has been updated 11/02/12 I don't understand, are plug-ins something different

  You seem to have 1.6.0_29 of next generation Java plug-in installed, where 1.6.0_30 is the latest version of Java.

• When I look to the top of my system config, it shows that, in my MB in total, I have 512 MB, but only phycially have avaialable 192 ideas how to solve this

  the available mb is too small, no way to solve this...

  Windows and Applications requires a memory.  If you don't have enough, your only recourse is to upgrade your memory by installing more.

  HTH,
  JW

• Computer won't start; System Restore does nothing

  After downloading and installing Service Pack 2, I can't restart the system.

  Restart with the repair of the system has no effect - a few tracks.

  System Restore is also no help.

  Hello

  1. have you tried to start the computer in safe mode?

  2 have you tried to restore from the system recovery options?

  I suggest to start the computer in safe mode and check if you can start:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are not able to start the computer in safe mode, then do restore from the system recovery options and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It will be useful.

  Start in safe mode did not help.  The computer wnt in a mode of repair without end, without any results.  I finally got a memory diagnostic option (F8 or F12 - can't remember which - of the splash screen) and ran it for the hell of it.   Somehow, when it is finished, the computer started upward.  I did a system restore and I thought that was OK.  Then I met several different errors and finally gave up. All the problems started with me trying to upgrade to Vista Service Pack 2.  The installation failed (twice).

  I've upgraded to Windows 7 (from Vista) and am happy so far.

  Thanks for the help.  Good to know he's experts there.

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• CS3 Setup System Check says that Safari is open when it is closed

  Run the installation under OSX and during System Check, alert States that "Installation cannot continue until the following applications are closed: Safari.

  I checked Safari is closed, and no other connected users, but cannot satisfy this prompt.

  Programs interfere with the Installation of fence
  ----------------------------------------------

  Task Manager - PC: (CTRL-ALT-DEL) http://support.microsoft.com/kb/323527

  Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/

  Error "Setup cannot continue until...". Adobe Bridge is closed. Installation | CS5
  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

• In the recovery system and he wants that I select configuration information. File, because it cannot find the operating system, but do not know what to choose

  Hello

  I am in the recovery of the system, which I have to by selecting f8 and "repair your computer", and after taking me to a window that says "select an oprerating system to repair...." If you don't see your operating system listed, click load drivers to load the drivers for your hard disks'.  Then when I click load drivers he wants me to select a file in System32 menu configuration information, but I don't know what to choose.

  Thank you

  Centi

  Hi centi,.

  1. Why did you start the windows recovery environment by pressing the F8 key?
  2. do you get an error at startup of the system?

  If you are unable to start Windows in normal mode, try the following steps:
  a. boot to the Windows recovery environment by pressing the F8 key.
  b. on the window that says "select an operating system to repair" click Cancel to see Windows Recovery Options window, and then select command prompt.
  (c) in the command prompt, type the following command and press ENTER: Bootrec.exe /RebuildBcd
  Output Type d and hit enter to close the command prompt.
  f. restart the computer in normal mode and check if the computer starts Windows successfully.

  Discover How to use the Bootrec.exe in the Windows recovery environment to troubleshoot and repair startup in Windows problems

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows vista (reboot) for 6 hours, but same screen comes to show that his research and nothing happened?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs that you have problems with windows vista starts do not
  • Error messages, it's that my startup repair tool going but its still looking for problems
  • Recent changes were made to your computer no change, it's just stopped working suddenly and close
  • What you have already tried to solve the problem I tried startup repair, but that has not worked. I've tried off DURATION and attempted to start normally and then after a while my screen goes blank.i tried the system restore, but it did not work. I AM ALSO AFRAID THAT I LOSE MY DATA, CAN U PLEASE GUIDE ME THROUGH WITHOUT LOSS OF DATA
   
  Hello
   
   
  1. don't you make changes to the computer when you used the last time? For example, you have installed updates or a program of ny?
   
  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 2.

  Step A.
  Start your computer in safe mode and check if it starts.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
  Step B.
  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 3.
  I recommend you to restore system using a Windows Vista DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc.
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   
  For more information see the articles below:
  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Open a window of normal (non-private) and the journal in a site. Open a private window and go to the site and it shows that you are connected. 11 IE does not work. Why FF?

  V32.0.2.

  It is certainly not my experience.

  Have you changed your configuration before you post? Your "more details of the system" seems to show that you have configured to automatically start in private browsing mode, you can select in the Firefox Options:

  "3-bar" menu button (or tools) > Options > privacy

  If the value is "Firefox will: don't remember history ' change the dropdown to" Firefox will be: use the custom settings for history "to reveal the current configuration.

  What is the box ticked for "always use the private browsing mode"?

  If Yes, then what you have found is logical: private windows share a pool of "session only" cookies separate Windows non-private, and you have all the non-private with automatic private browsing windows.

• When I turn on my computer desktop-windows vista - I get the message that Multimedia Keyboard Driver has stopped working.

  How can I fix the error message that reader Multimedia Keyboard stopped working.  My keyboard is a

  0817-gateway model # KB.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If it works fine in safe mode, and then try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• I get «mode system not found "on an old laptop Gateway Windows XP.» Any ideas on how to get it to boot. No available XP disc. But the product key is on the back of the computer. Help!

  I guess that's it!

  Screeen show

  PXE - E61 media test failure. check the cable

  PXE-M0Fn leave Bgroadcom ROM PXE

  Operating system not found...

  That's what indicates the screen.

  It does not start on a Vista or 7 disc... BIOS errors.

  I need a copy of XP TSE start I think?

  Hi Garrett.

  This message type indicates an attempt to start the operating system from a network device.

  Check the order of boot sequence in the BIOS. Make your hard drive as the priority.

  Important: changing the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the condition above is not true then you may be able to get the disc from the manufacturer to perform any additional troubleshooting steps.

  In addition, you can consult the section below, which provides information on troubleshooting steps to perform when you encounter this error: http://support.gateway.com/s/Checklists/BPC/ck20070907117.shtml#MBR

  I suggest you to contact the manufacturer of the computer.

  Link from the manufacturer:http://support.gateway.com/s/software/misc/SUPPAGE01su135.shtml

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sierra will not be installed: 'file system check or repair a failure '. What can I do to restart my computer?

  I downloaded sierra and tried a reboot. However, I have a screen now States in which Mac OS could not install. "Declaration of file check or repair failed. Quit the installer to restart your computer and try again. "I've done thisand it comes down to the same screen. What can I do?

  Try to look into the demands of Sierra and if it is there double click it. If the problem persists, you should first check to see if your computer meets the minimum system requirements. If it meets the minimum requirements, then it is possible that you have corrupted DOWNLOAD, or you have hardware problems.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• I can not back up my computer, or use Windows Proformances system check

  When I try to back up my computer or let windows create a system image and save, it will only create the system image and I just get an error message, I think this all started when I started having problems with my (say unavailable event log)

  Hi Frederic,.

  Write to us with the following information.

  (1) what is the accurate/complete you get error when you try to perform a system image?
  (2) that monitor performance of the system do you want to?

  (3) do you have any third-party security software or antivirus installed on your computer?

  (4) did the problem started recently?

  (5) as 'use of Windows System performance check' what are you referring?

  (6) are you referring to any utility troubleshooting? If so, then what convenience store?

  You can follow the links below.

  Backup and restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/backup-and-restore

  What is a system image?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-a-system-image

  Write the asked information. We will help you to come.