Computer is sluggish and delays in responding to orders, sometimes even freezes

Similar Questions

• Window of my computer started flashing and I can't rename a file even after reinstalling my computer.

  Window of the computer began to blink and I can't rename a file when it started to Flash, but after a reason, that he began to stop flashing and I can rename a file at the moment. Even after repeatedly re - install my computer, the problem is still there. Is there a solution to this weird problem?

  Can someone help me?

  Hi Shamir Qushairi,

  You can try these steps and see if it helps.

  Method 1:

  You can try to boot in safe mode and see if you can rename the files.

  Start your computer in safe mode

  Method 2:

  You can also try to update the latest version of disks from the manufacturer's Web site map.

  For more information consult the following link:

  Updated a hardware driver that is not working properly

  Method 3:

  You can also read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• When getting started, my computer is slow and unresponsive?

  For the last two or three days, I noticed that my computer is very slow and unresponsive. None of the programs that I click on will open and usually everything will freeze if I press what either. When I put my computer in Mode safe mode (with networking), everything seems to work very well. When in Mode safe, everything I click actually works, but it seems that it's not when I start my computer using the option "Start Windows normally". I have a laptop that is currently running on Windows 7. Anyone happen to know how I can fix this problem? Can what steps I take to fix my laptop? I also tried searching for virus and so far it is said that my computer is fine and has no virus. I used CCleaner (Pro) to "clean" my computer and my computer still seems slow, unresponsive and freezes quiet a bit. I also system restore my computer to an earlier time, but it is still giving me the problem slow, freezing and not responding like it.

  (1) how to solve a problem by performing a clean boot in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application at a time to find the software application incriminated.

  ===============================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  ===============================================================

  (3) how to do a repair installation to repair Windows 7
  This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  No-reformatting of Win7, non-destructive reinstall
  http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/

  Note: If it is possible to create a backup of Windows of the Image before you start.
  This is your backup in case something goes wrong.

  EaseUS Todo Backup Home http://www.todo-backup.com/ V6.5
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 6.5 supports XP, Vista, Windows 7 and Windows 8

  J W Stuart: http://www.pagestart.com

• I download my e-mails from gmail to my computer using firefox and only downloads of firefox 3 at a time, not all of them, I. Takes forever.

  I download my e-mails from gmail to my computer using firefox and only downloads of firefox 3 at a time, not all of them, I. Takes forever.

  Sorry, I should have to say that I use Firefox Thunderbird. To automatically download my emails to gmail, but it downloads only 2 or 3 when I did about 50 per day. I have to click again and again. It is on a desktop computer, laptop computer, in fact. My office works very well. Thanks for any help.

• With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

  With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

  Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

  Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

• MacBook Pro: Integrated keyboard and mouse not responding pluse

  I have a MacBook Pro 13 ", early 2015, installed with OS X 10.11.4.

  I use it mainly to work, with the screen closed, an external display (via Thunderport) and an Apple and change Vertical Mouse 4 - times connected via Bluetooth wireless keyboard.

  Before I get home, I open the screen, disconnect the power cord and power cord screen Thunderbolt and then close it. I leave the keyboard and Bluetooth mouse on as I leave the office.

  It works normally, but yesterday my Mac kept looking for Bluetooth devices home and would not respond to the built-in keyboard and mouse (with the exception of the switch when maintained supported 10 seconds for a forced stop). Reboot doesn't change anything and I tried to reboot with the disk (Cmd + R) utility or reset the NVRAM (Cmd + Option + P + R) and the keys did nothing. Reset SMC (Shift + Ctrl + Option + power) does not seem to do anything either.

  When I connected a keyboard Apple USB C, the keys have been recorded, but it would still find a missing mouse and go anywhere else than the screen "You are looking for a Bluetooth mouse".

  Back at work today, everything works: built-in and Bluetooth devices.

  Any suggestions?

  Update: the built-in keyboard and trackpad now don't work at all, even when Bluetooth devices are connected.

• When doing a full backup computer falls down and must be closed

  Hello

  When doing a full backup of the computer falls down and must be closed using the power switch, it is very good when you make a partial backup.
  I'm trying to backup to an external hard drive via a usb connection.

  The hard drive is formatted in NTFS
  Someone has any ideas
  Fred

  Hello

  I will try to resume that you issue.
  The HARD disk has several partitions (I guess 2 partitions)
  The backup procedure works fine if you safe data only from single partition, but it crashes if you try to create a backup of all partitions of set. Am I wrong?

  My first question; What backup utility do you use?
  Are you sure that this backup tool supports the backup of the two partitions at the same time?

  I put t know if it will help but a similar problem happened to me.
  I've used Norton ghost and I wasn't able to create a backup of a partition.

  The procedure began, but after several minutes, the screen goes white and the notebook frisottés.
  I ran the scandisk, chkdsk and I defragment the whole HARD drive.

  This helped!

• HP computer laptop 15-afl54sa: network card for computer HP laptop and the wireless adapter drivers

  Hello

  My name is Andrew and I currently installed the operating system windows 7 on my HP laptop. However, I'm unable to connect to internet via cable and wifi network. I have included all of the hardware ID and my computer laptop make and model below.  Is it not possible for a technician to send me the links required for these special as soon as POSSIBLE drivers. Thank you very much.

  15 - afl54sa
  
  Laptop
  
  [Personal information]
  
  N7J75EA #ABU

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C & REV_07
  
  
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_020000
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  
  PCI\VEN_14E4 & DEV_4365 & CC_0280
  
  
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  
  PCI\VEN_1022 & DEV_1537 & CC_108000
  
  PCI\VEN_1022 & DEV_1537 & CC_1080
  
  
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C & REV_42
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  
  PCI\VEN_1022 & DEV_780B & CC_0C05
  
  
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C & REV_11
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  
  PCI\VEN_1022 & DEV_7814 & CC_0C03
  
  
  
  ACPI\SMB0001
  
  * SMB0001
  
  
  
  ACPI\MSFT0101
  
  * MSFT0101

  Hello:

  It is a model that is difficult to install W7 on.

  See if these drivers work...

  PCI\VEN_1022 & DEV_780B install this driver first and then restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  PCI\VEN_1022 & DEV_7814 installation of these drivers and reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058#tab1

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150879_1

  PCI\VEN_10EC & DEV_8136:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_148639_1&swEnvOid=4063

  PCI\VEN_14E4 & DEV_4365:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_151873_1&swEnvOid=4063

  You will also need driver bluetooth for this card template...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155436_1

  PCI\VEN_1022 & DEV_1537: This driver may need to be manually installed.

  Download and run this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_153451_1

  If it does not automatically install unit above, go to Device Manager and click the controller PCI E/D who need driver.  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp72675.   Make sure that the include subfolders is selected and the driver should install.  Then restart.

  ACPI\SMB000:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_154783_1&swEnvOid=4063

  ACPI\MSFT0101: There is no W7 drivers for this device because it is only used for certain security features that can't be find in W8.1 and W10.  W8.1 and W10 were the drivers for this device included with the operating system.

  Some books of class cases may have a BIOS setting to disable this security feature, but I doubt that yours is.

  No no not this installed device will have no negative impact on your PC.

• How to ensure that my computer has microphones and then use them for talking to Cortana?

  How to ensure that my computer has microphones and then use them for talking to Cortana?

  Hi Walter,

  Please start by http://windows.microsoft.com/en-us/windows-10/cortana-privacy-faq

  Also, try to review this tutorial: http://www.tenforums.com/tutorials/4026-cortana-turn-off-windows-10-a.html

  They should help you get started.  Problems specific to the micro (existence, activation, volume,...) will be addressed (more than the troubleshooting steps if Cortana doesn't) that you go through the above; However, a "one-stop-shop" for microphones & recognition recording & speech covering all peripheral aspects are versatile control panel page (see the path in the blue header at the top of the screenshot pictured below for W10Pro 11102).

  Best wishes

  Kosh

  

• I can't let the other customers of the user to use my computer, it trys and then disconnects them. I reinstalled users and even the guest account disconnects

  I can't let other user clients use my computer, it starts and then they disconnect. The only access is administration account thecomputeris a toshiba satellite laptop computer

  Hi Charles,

  To help you better, more details on the issue:

  1 is connected to the domain of the computer?

  2. what type of network you set up?

  Please post back with more details, so that we could provide assistance on the issue.

• My computer is slow and takes forever to restart ahe here all programs no matter who it will speed up the

  My computer is slow and it takes forever to reboot can community recommend programs or suggestions that could help me.

  Hi Kenneth,

  Welcome to the Microsoft community where you can find all the answers related to Windows.

  According to the description, you are having problems with the computer running very slow.

  What operating system is installed on the computer?

  Perform the steps from the link below and see if it helps.

  Optimize Windows 7 for better performance

  Optimize Windows Vista for better performance  

  How to set performance options in Windows XP

  Answer to us if you have problems with slow performance, or any other matter of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.