COMPUTER IS TURNED OFF

Similar Questions

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• Computer will turn off when the PXI chassis is turned off

  Hello

  I realized that my computer is shut down properly if I disable my chassis PXI-1036, until the computer is turned off. Is this a normal behaivour?

  As I remember, the chassis PXI-1036 must be turned on until the computer is power on, and I think that maybe on turn it off I have to follow the same procedure.

  Thanks a lot for your advice,

  Hector

  The chassis must be on anytime on the PC is.  Then it turn on before the PC and turn it off after the PC.

  This is because the chassis is an extension of the PC's PCI bus, so he expects everything to be available all the time the PC is powered on, as would be a PCI expansion card.

  -Robert

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• Task failed when the computer is turned off

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs. How can I force this task runs next time I turn on the computer?

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs.  How can I force this task runs next time I turn on the computer?

  You're overthinking this problem.  Simply configure tasks planned to inform you of missed tasks .  If the date of scheduled backup has been a weekend or a holiday with the computer off, the next time you turn on the computer you will get a notification that "some tasks did not run."  At this time, manually start the backup job.

• Woke up and my computer was turned off

  Added 2 GB of memory to my Windows Vista program, also added an external hardrive, the idea was to keep the free memory on the computer and use the 2 TB external hardrive to store files IE. music, photos and documents etc everything was beautiful then all of a sudden I woke up one morning and my computer was turned off, I checked and tried everything but he wouldn't come, crashed my computer, and if so can it be saved and how do I do this?

  Hello LisaBrookes525

  Thank you for your comments.

  Just before you cart the machine to a technician try to change the fuse in the plug on the main power cable to the PC. Your machine is completely dead it may be something as simple as a fuse.

  Another option could be the PSU (Power Supply Unit) inside the PC

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• The tune up is scheduled for 1 AM, my computer is turned off, only look upward still run?

  The tune up is scheduled for 1 AM, my computer is turned off, only look upward still run? Or I have to leave my computer?

  Welcome to the HP Forum!

  AKCharlie wrote:

  The tune up is scheduled for 1 AM, my computer is turned off, only look upward still run? Or I have to leave my computer?

  Yes.

  You will need to have the laptop for a tuneup to happen.

  I recommend that your schedule the tuneup for a long time when you are not using the laptop during the day so you can stop it after what he's done.

  Kind regards
  ERICO

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

• My computer has turned off all the themes of Windows 7 except Classic

  original title: My Computer has turned off all the Windows 7 themes. I can only access classic themes. How can I get new themes to return? Thank you

  Hi, my computer is Windows 7 Professional has changed suddenly automatically the Windows Classic theme and all the other themes are grey and not accessible. How can I access the window 7 themes yet. Thank you.

  You can also check in your windows Services and check that the DWM (Desktop Windows Manager) is running.

  Start button > Search > type Services and select.
  Look and to make sure it runs.

• The trash empties automatically when the computer is turned off. How can I fix it.

  The trash empties automatically when the computer is turned off.  How can I fix?

  The trash empties automatically when the computer is turned off.  How can I fix?

  Find what to do (something you installed and/or took the time and effort of installing) and undo - because it isn't Microsoft / default, or even something extremely simple (not something inadvertently, you can check, etc.) to (that happen.)

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off

  I want to install Illustrator on my second computer and it keeps disconnecting. My first computer is turned off. I pay package the student since April 2014 and for a year, and I understand that I can get Adobe in two computers at home.

  Thanks for your reply. I pay $ 22 a month package for a year. I just spoke with the help of Adobe, and I solved it they problem. I'm on my second computer. Magali helped me, service excellent customer!

  You are now chatting with 'Magali.

  Magali: Hello. Welcome to Adobe Technical Support.

  Magali: Hi there.

  Magali: Could you please develop your question?

  Magali: Are we still connected?

  Maria V Abreu Valarino: Hi. I want to install Illustrator and some other applications adobe on my second computer and it keeps disconnecting. My first computer is turned off. I registered until I turned it off. I have already downloaded creative cloud, I introduce my user and password and it tells me "you have been disconnected. I pay the student since April 2014 Kit and I'll do it for a year, and I understand that I can get Adobe in up to two computers at home. What should I do?

  Magali: If I understand correctly, you can not connect to the desktop CC application. Is this correct?

  Maria V Abreu Valarino: Yes, in my second computer

  Magali: Thanks for confirming.

  Magali: I'll be happy to help you with this problem.

  Maria V Abreu Valarino: Thanks a lot.

  Magali: Close all adobe applications running including the CC desktop application.

  Magali: You're welcome.

  Maria v Valarino Abreu:

  Magali: Place you C drive and type %LocalAppData% in the address bar and press ENTER.

  Maria v Valarino Abreu:

  Magali: Go to adobe.

  Magali: Go to the OOBE.

  Maria V Valarino Abreu: I don't have a folder under that name.

  Magali: Appointment to the Local and then go to Adobe.

  Maria V Abreu Valarino: ok, I'm in OOBE

  Magali: Then go to opm and remove the opm.

  Magali: May I ask if you are finished?

  Maria V Abreu Valarino: it says that the file is currently in use, does not want to remove it, and CC Office App is not open

  Magali: Launch the Task Manager and click on the "processes" tab and put an end to all the processes associated with adobe, creative cloud and synchronization of the base.

  Maria V Abreu Valarino: done, I deleted the opm

  Magali: Okay.

  Magali: Launch the CC desktop app and try to connect.

  Magali: And tell me if you still get the error?

  Maria V Abreu Valarino: ok, give a second

  Magali: sure.

  Maria V Abreu Valarino: nop, I don't sign

  Magali: I know the error message you get?

  Maria V Valarino Abreu: "logged out".

  Magali: Okay.

  Maria V Valarino Abreu: "you have been disconnected".

  Magali: Can I know if you are in home network or office network?

  Maria V Valarino Abreu: I am a student

  Magali: Okay.

  Maria V Valarino Abreu: I have two computers at home

  Magali: Okay.

  Magali: If please browse the computer and then go to the c drive.

  Magali: Go to windows.

  Maria v Valarino Abreu:

  Magali: Go to System 32

  Magali: Go to drivers.

  Maria V Valarino Abreu: I'm here

  Magali: Then go to etc and find the Hosts file in the etc folder and copy it to the desktop computer.

  Magali: and then open it with Notepad and copy the content and paste it on the chat window.

  Maria V Abreu Valarino: # Copyright (c) 1993-2009 Microsoft Corp. # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # This file contains the mappings of IP addresses to host names. Each entry # should be kept on an individual line. The IP # must be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one space of #. # Additionally, comments (such as these) may be inserted on lines # individual or follows the name of the computer that is designated by a symbol "#". # Example: # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client name resolution host # localhost is handled within DNS itself. # 127.0.0.1 localhost #: 1 localhost

  Magali: Thanks a lot.

  Magali: Close the hosts file.

  Magali: Launch the internet browser explorer.

  Magali: I know if it is launched?

  Maria V Abreu Valarino: ok

  Magali: Open Internet Explorer > options Internet, click on the tab "connections". In the tab 'Connections', 'LAN' selection settings, you will be able to display the Local network settings. In the LAN settings box, select the checkbox "automatically detect settings".

  Maria v Valarino Abreu:

  Magali: Then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server "." Click on the ok button and then close the Internet options.

  Maria v Valarino Abreu:

  Magali: Launch the creative Cloud desktop application, try to connect using Adobe ID and password.

  Magali: I know the status?

  Maria V Abreu Valarino: it seems that it is me signing in, yet the blue circle of uoloading

  Magali: Okay.

  Maria V Abreu Valarino: Yes! I'm registered!

  Magali: great!

  Magali: Now, you can go ahead and the CC desktop application allows to install the CC apps.

  Maria V Valarino Abreu: John, you're the best! Thank you very much!!!

  Magali: You're welcome.

  Magali: I'm so happy to hear this from you.

  Magali: Is there anything else I can help you?

  Maria V Abreu Valarino: can I do a survey of your service?

  Magali: You receive an email that will contain a link to complete a survey in option to provide your comments on the experience of the support. Your comments are much appreciated.

  Magali: Her makes me happy to help you.

  Maria V Abreu Valarino: Yes I'll do without a doubt! Thanks again, have a nice day!

  Magali: You're welcome.

  Magali: take care.

  Magali: Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

  --

  The chat session is over.

  Please contact Adobe.

  This chat session is over.
  Please contact Adobe

• With this update my computer not turn off. Clears the screen, but this is all about.

  This computer is the new 12-inch mac that came out this spring.when I've updated about a month ago, it would not turn off. I got tired of hold down the b power button to turn it off. I returned it for a back earlier upward. It automatically updated again and here I am in the same disorder. I think I'll just close the lid and stop worrying in this regard.

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Re: Satellite A215-S6820 - computer laptop turns off by itself

  I've had this computer for about a year now and it's just recently decided to die 3 days prior to the end of my warranty. Stroke of luck, I thought get fixed and ready to go. I used it for playing games its been quite a nice game until recently machine. I sent 2 times frist time they replace my motherboard pick it up and he didn't stay for more the same 15 last when I ran the game. Returned and all recently got back with more questions I know maybe just to send it back and have it repaired the right but I was wondering if there was a way I can fix it with little or no cost.

  Here's what's happening I have raise any game that I have played before top war hammer 40 k 2 series for about 5 minutes then turns off. Sins of a solar empire, a game where game Id nonstop until I pass out have games last 14-15 hours well lets just say that I can't even set up a game more. So I try older games yes I can play em for a while then crash. I think it is a heating problem that initially before he died he destroyed when map chart or something else. It surfing the web even now just seems to run hot then normal.

  Should I call and have em it back? I feel bad cause I like Toshiba and I just don't want that they think I'm trying to get a free patch or a new computer or what must be done to repair my laptop. I really like this laptop and products Toshiba Id want just this fix so I can be a killer of happy zombie in left 4 dead again.

  Hello!

  That s not all goes well publish your story on your laptop, but I think the same as you. I think the laptop is overheating. You can try to clean it with a jet of compressed air. This could blow out the dust from the cooling fans.

  If it doesn't work you have to bring this back to the authorized service provider. You told them that the laptop freezes in games? Maybe they don t have tested this so I have contacted the provider of service again.
  It could be that the thermal grease needs to be renewed, or else. The laptop technicians can verify this.

  Good luck and keep us in the loop.
  I'm sure that ASP will fix your problem as soon as possible. My experience with ASP s is very good and time to repair doesn t take a long time.

  Good bye