My computer has turned off all the themes of Windows 7 except Classic

original title: My Computer has turned off all the Windows 7 themes. I can only access classic themes. How can I get new themes to return? Thank you

Hi, my computer is Windows 7 Professional has changed suddenly automatically the Windows Classic theme and all the other themes are grey and not accessible. How can I access the window 7 themes yet. Thank you.

Advertisement

You can also check in your windows Services and check that the DWM (Desktop Windows Manager) is running.

Start button > Search > type Services and select.
Look and to make sure it runs.

Tags: Windows

Similar Questions

  • M35 satellite turns off all the time

    My Satellite M35 turns off all the time.
    Trigger, then it dies.

    Advice please

    Seems to be a problem of overheating!
    Usually, this happens because the cooling modules cannot turn with maximum performance and cannot cool the internal devices properly!

    Why is this happening? Well, the reason is the dust and debris that prevent the fans work properly!
    I recommend cleaning with compressed air stream fans that can be purchased in most computer resellers!

    Good bye

  • Computer is turned off during the update of game time.

    Windows Update (set to auto) works if your computer is turned off during the update set time?

    I ask this for XP and Win 7.

    Thank you

    N °

    Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

  • Computer will turn off when the PXI chassis is turned off

    Hello

    I realized that my computer is shut down properly if I disable my chassis PXI-1036, until the computer is turned off. Is this a normal behaivour?

    As I remember, the chassis PXI-1036 must be turned on until the computer is power on, and I think that maybe on turn it off I have to follow the same procedure.

    Thanks a lot for your advice,

    Hector

    The chassis must be on anytime on the PC is.  Then it turn on before the PC and turn it off after the PC.

    This is because the chassis is an extension of the PC's PCI bus, so he expects everything to be available all the time the PC is powered on, as would be a PCI expansion card.

    -Robert

  • Bug in version 6.2.1 of the filter? (flag to reset filters turned off all the time)

    I love working with the filter with indicator / without indicator with my photos.
    With the 6.2.1 last version, with indicator filter go back "filter off" all the time.
    Example, 3 pictures are marked, I select, I merge them into an HDR... .and when you finish the filter is reset to filters turned off.
    Also edit a photo in Photoshop... .returning to lightroom... .filters off

    Quite boring!

    also ask, if you merge 3 pictures that are flagged (picked) in an HDR, it would be nice that the merged result is marked as?

    I think that you have unlocked filters.  Make sure this file > library Filters > Lock filters is verified (the lock is also represented by the padlock on the right end of the library filter bar - make sure that it is locked).  When it is locked, the current filter is not changed by Photo > merge pictures (at least in my 2015.2.1 CC).

  • Computer is turned off, online the page in the window is too small. Can not get it back.

    I turned computer, went online and home page is so small, I can barely read. The window itself covers my screen, but the page is in the middle of the screen of the window, 10 sizes too small. I visited all the Web sites were similarly. This page also. I tried to adjust it myself, but it changed nothing. The display settings have not changed that I am aware, so with the same settings as always, I didn't really know what to change. I tried to use the system restore, but that never worked when I tried it in the past. Indicates an error has occurred and cannot complete. I'd appreciate any help. I'm an amateur, where computers are concerned, but I can get around pretty good if I have good instructions.   Thanks in advance for any help!

    FYI - HP desktop, Windows Vista, IE8

    You might try to go in the Tools menu in Internet Explorer, then Internet Options, then advanced and select Reset.

    Restores system will fail if you have Norton and do not turn off "tamper protection '.

  • Start button does not work and turns off all the icons

    Hi there, I try to open my Start menu does not work, and all my turns off desktop icons. I don't know what to do and I really have a hard time with these two problems. Any help would be great.

    I try this method and none of them work

    I have AVG Antivirus, I run it twice but nothing found

    I also run sfc/scannow in cmd promt twice, but it is 100%, nothing wrong here

    Any other comment, please help

    Much Apprecciate

    Do not have access to Safe Mode if you ignore the system restore and click on the button on the Start Menu?  Your initial problems are repeated in this case?

    If you can access Safe Mode things, see if it will help you create another user, and it will allow to test this new user in Normal Mode of loading.

    Also, if you can in Mode safe, download and run this program in mode safe mode and let it scan your computer for malware.

    Malwarebytes' Anti-Malware
    http://www.Malwarebytes.org/MBAM.php

    Try this mode safe too.  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

    If Safe Mode is not an option for you, see if you can access options of startup repair (be it to start any Windows Vista DVD or the Safe Mode screen options).

    Startup Repair.

    Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

    http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

    Startup Repair: frequently asked questions
    http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

    See if you have any DVD installation or another way to run the Startup Repair tool.

    Windows Vista download Recovery Disc
    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    If you still have problems after all that you can post back and we'll consider a data restore and reinstall options.

  • Satellite A300D - Turn off all the time

    My wife has a Satellite A300D (model PSAK4E) and it keeps closing. The two randomy and when induced under certain conditions

    Previously, I tested the HARD drive and found bad sectors then replaced with a 64 GB SSD. I tried to install Windows 7 but it kept fault towards the end. So I reset the machine without a battery and now the power button for 2 minutes to clear the memory. Installed Windows 7 + updates.

    I was worried about stopping all the time but flashed the BIOS. Flash worked.

    Laptop resets always? I have reviewed several possible causes and wanted to get other peoples ideas
    1 HARD drive - replaced and even resets
    2. battery - ran on power sector only and even resets
    3 overheating - sometimes under certain conditions (memmory tests or you try to run certain applications) or randomly (without reason)
    4. a broken circuit somewhere on the motherboard
    5 - completely new OS + software resets the laptop when using some applications from a live disk.

    Thank you inadance for the help

    Hi me_in_oz,

    Theoretically the laptop turn off itself due to a higher internal temperature to protect the equipment against damage.
    In this case, you will need to clean the laptop using jet of compressed air to blow the dust from the cooling fans. It is easy and takes only a few minutes to check out this article:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    Otherwise it seems to be a serious hardware problem and your laptop should be checked for professional people. Probably it s a malfunction of the motherboard

  • Automatic Updates turned off all the time XP

    Updates automatic turn off XP SP3 its own WARNING all the time constantly security - I have Kaspersky internet security 2012 worm 12.0.0.374, 8 GB of Ram. Intel CPU machine compatible PC.

    I saw the other posts on this - doesn't seem to be one definitive solution other than to search for malware.

    Is there any software/malware known that this may be because of this?

    Hello

    I am happy to know that the problem has been resolved and that I could be useful.  If you have any questions on Windows then post in this forum.

    It will be useful.

  • Satellite Pro 6000 turns off all the time

    Hello..

    I bought a 2nd hand Saturday pro 6000. And now it has started to cut, but it turns on when I press and hold down on the actual case, and when I let him go, he just died... He starts to get on my nervs now I even cleaned up the dust, and he does not know. And there is an orange led flashes all the time everyone knows what is happening or what I can do?

    Thank you will be

    Already seen on the Pro 6100...

    You can read more here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18934

    Concerning
    chain

  • computer is turned off during the update update wiil not finished

    computer not end not update

    Hello

    The initial power, known as the POST, press F8 the end POST and before Windows starts to load. You may need to press the F8 key repeatedly. Should you get a boot menu, select the last good known Configuration. It will return the system to the State of the last successful connection and should allow you to fully load the system.

    If this is not the case, go to the start menu and there rstrui.exe execution of the command line to load the system restore, choose Safe mode with command prompt. Choose a date prior to the occurrence of this problem.

    As a general rule, you should never turned off a system while an update is in progress because it can paralyze the whole of system files. For this reason a laptop shouldn't run on battery for an update.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • His will and turn off all the seconds during playback

    Someone can help me. When you play music or videos on Vista the sound goes and goes off intermittently every few seconds or more.

    Maggie

    Hello

    How can I stop my music skip or break down when I play?
    http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

    1. right click the icon of speaker near right lower clock - peripheral of reading

    Highlight speakers - properties (right same low page) - tab improvements - check Disable all the
    Sound effect apply - OK

    2. check the configuration - Device Manager - sound, video and game controller

    Note name and complete model of the audio device - full decription - now double click it.
    Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
    behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
    the driver stack.

    Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
    your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

    Then do the same for the manufacturer of the device (like Realtek or who made the device).

    NOTE: Sound often restore drivers in order to check the version after installing and restarting
    to see if the version you have installed is there, if not reinstall - restart until it is. He
    may take several tries depending on the recommitments how much he made.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • When lightroom section of the trial, no response from the download button. new laptop turned off all the pop ups and

    Could not get the trial button to work in lightroom download all the pop ups etc erased. help please new computer windows 7 64 bit laptop

    You have a kind of installed Download Manager? or a browser add-on may be that manages downloads for you?

    What browser do you use? You can also try downloading with another browser?

  • How can I turn off all the sounds click in CP7

    I don't know about the properties for each button and their definition apply no clicking sound, but there is a button next to the quiz results page, and I have no option to select no clicking noise in the properties of the button (using the slider of mast)

    I'm running out of options to disable the button click/click the button run 1.

    Thanks in advance... I have now that's dumb question... answer it will be quite simple, I can't see it right now...

    See you soon

    Sabine

    Hello

    Crushes the sound is to simply rename the audio file. Open the Captivate in Windows Exlorer Gallery, navigate to the Gallery\Mouse\ClickSounds folder and rename the Mouse.mp3.

    See if that banishes the click.

    See you soon... Rick

  • accidentally turned off during the update of windows

    Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

    someone could help me on this guys, how can I do recover without reformatting my laptop.

    Please help me guys...

    Thanks in advance...

    Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

    If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

    If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Could not load add module. ACC/ActivClient card reader.

    I have a USB CAC card reader and software ActivClient 6.2. However, I'm unable to add my card reader ACC as a module for Firefox despite me being able to do it in 4. I am currently on FF6, just the upgrade of 5 as I thought 6 power to fix the problem

  • playlists for transfer from one library to another on the same computer

    I have 2 iTunes libraries, each in a separate iTunes folder on a single computer.  A library contained musical; the other doesn't have any content.  Also, I have 2 iPod classic I want to be able to synchronize separately for each library.  To this en

  • battery for touch Z400 problem

    Hello! I have a z400 ideapad touch and I have a problem with the battery. It says plugged in, in charge, but it does not load and 40% it is down to 35% already and I don't know what to do and I can't open it without the adapter attached to it. and I

  • Problem with the certificate on Xbox 360 system Internet Explorer error

    Original title: that is this "problem with certificates? I have been using Bing on my Xbox 360 Internet Explorer system for years with little trouble. Today, I cleaned the history since he was a little slow again, but now I am unable to connect to Bi

  • measurement of signal of phase

    I want to measure a signal in phase and out of phase, how do I set up a VI to measure them separately?