Computer laptop Alienware M18 close, a signal sound white screen

I have a problem with my Alienware computer. I was working and suddenly the screen blanked out, but then she came back and a small balloon pops up saying the NVIDIA card crashed, but it was fixed. A few minutes later, he crashed again and turn off the power. When I tried to start the computer, it started to beep. It does beep on beep every three seconds. He continued to beep like that for awhile. I counted 20 beeps before I turned off the computer, unplug it and removed the battery.

I'm kind of desperate. I have a Chromebook for back up but my powerhouse programs are on this computer. Anyone know what the problem is.

Hi Gigajojo10,

Read this article and try the troubleshooting steps. If the problem persists, and the system is only to have a continuous beep (beeps and beeps once, then pause then yet once), this would indicate a motherboard failure according to the Beep Codes POST NO.

Let me know how it goes!

Tags: Dell Products

Similar Questions

  • My computer laptop alienware 18 works with a 240-volt power?

    I want to buy a laptop alienware 18 in the Canada, but I can travel to the United Arab Emirates UNITED were there are only 240 volt power sources, will be using an adapter normal thing?

    The adapter fits tensions in the world - you simply need a converter of Jack on the side power ca.

  • I can't launch the Skype app on my new windows laptop 8. I get a blue white screen.

    I tried to uninstall/reinstall and it worked once and now does not work again (blue white screen lanch app).

    I installed norton antivirus, but Skype has worked once when it was installed, I don't know what has changed now.

    Help, please!

    Also I'm not a computer expert so step by step instructions for a resolution are necessary :-)

    Thank you!

    I tried http://beta.skype.com/en/download-skype/skype-for-windows/ and delete the app. This desktop version works much better than the app.
    Thank you

  • Computer laptop Alienware 17 would not start

    Hello

    I had this problem twice now. I was on my laptop and it should work fine ALL day and then I would stop for the night. When I wake up and try to turn on, it would do nothing for most, but sometimes he would light up for about a second or two and goes off. Both times I solved this in re-allocation of places the battery CMOS/button. Although I have solved this problem on my own, it is still VERY upsetting. Why the * does this continue to happen?

    The first time it happened, I had just installed the latest version of the BIOS and rebooted and it worked 100%. Is that I turned it off for the night and it did not work the next morning. I followed the instructions on how to install the latest BIOS very closely and I did twice previously without a problem at all!

    The second time it had happened was yesterday when I had just updated the card Wifi and a few other minor drivers through Device Manager. While I was still with my laptop, he turned to a BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL. When he did this, the speakers just makes a constant humming ceased after it began to restart. All I did was watch YouTube when this happened. And when he was trying to restart it froze on the Alienware logo. I waited about 15 minutes hoping it would move along, but he did not. I pressed the power button until it is turned off and then tried to restart it without success.

    This morning, I completely disassembled to remove the main battery and the battery CMOS/button.

    WHAT HAS CAUSED THIS? It seems to be whenever I update the drivers. I always update from the Dell website on the page where I get my serial number under "Drivers and downloads", or through the Device Manager. What is a bad piece of hardware? Software conflict? Please, please help me this end for good.

    Alienware 17 R3

    Processor: Intel (R) Core i7-6700HQ CPU @ 2.60 GHz 2.59 GHz

    Installed memory: 8.00 GB

    System type: 64-bit, x 64 based operating system

    Network adapters: E2400 killer Gigabit Ethernet Controller

    Killer Wireless-n/a/AC 1535 wireless network adapter

    Yes the new BIOS is totally *. Return to 1.2.2 is the most stable.

  • computer laptop alienware 18 inches with IRQL less THAN or EQUAL, and MEMORY MANAGEMENT errors

    I have a laptop Windows 10 18-inch alienware.

    I have been having lots of BSOD with error codes 'a' and 'a1 '.

    I usually get blue screen when I keep my laptop at night, updating a game I want to play, even when I keep him inactive I get the blue screen.

    all disks are installed with the exception of protection of data of the ST Microelectronics free fall"

    Please find the link to dropbox where you will find the dmp files and reliability monitor reports as well as a notebook with my laptop spec.

    Help, please.

    Yes it proceed to the screen as the before blue but

    I followed the steps in this new article

    and my problem seems to be resolved should I wait I'm running the laptop from one day to the next day to see if it will hold up to.

  • Computer laptop Compaq CQ58 - won't boot Up - black screen

    Hello

    My laptop does not start right once I reset the CMOS battery. Since then he has become black, power is ON & shift caps lock on the keyboard flashes but no sign of a video signal.

    Any suggestions to what is happening & what are the steps I must take to restore visual. All returns are much appreciated!

    Thanks in advance.

    SR

    Thanks for the information,

    Here is a link that explains the sequence as the caps lock light gives you. It seems to be a problem with the memory of the computer.

    The link explains what should be your next step. If you have any questions about the steps, let me know.

  • 100 s-11IBY computer laptop (ideapad) - cannot adjust the brightness of the screen - windows 10

    Hello my f11 and f12 keys is no longer adjust my brightness. The gauge up and down, but does not change the brightness. I tried to update the graphics card in Device Manager, but he says that it is up-to-date. Same thing with 'Generic PNP Monitor' said that it is up-to-date. I wiped the computer clean and 'reset' and reinstalled windows and it still does not allow me to adjust the brightness of the screen

    I'm not incredibly intuitive with computers, but I followed the instructions as much as I could find during my research online with nothing doesn't.

    Initially, the problem occurred when I used out of ignorance a program to install the drivers it says have been exceeded. After that, my audio stop working and my keyboard stop working entirely. After resetting the computer and windows resettled, the only question that remains is the brightness of the screen not being able to be adjusted.

    This drives me crazy, can anyone help me? I would be very happy! and please let me know if you need more information regarding my laptop. Thank you!!

    I thought about it. My drivers intel had to be installed since I reinstalled windows. I used the utility of intel and updated driver to update the graphics card update

  • Computer laptop Sony Vaio after upgrade to Windows 8 screen appears Dim

    * Original title: laptop Sony Vaio upgrade to Windows 8

    Since I've upgraded to Windows 8, my screen on my Sony notebook is very low. I went on the Sony website, and he recommended that I have not upgraded to Windows 8. Too late! What should I do to fix this?  I have a Sony Vaio VPCS111FM. Thank you!

    Good morning Sonu,

     
    Thanks for posting your query in Microsoft Community.
     
    I'm sorry to know that you are facing problems with the Sun computer screens after upgrade to Windows 8
     
    I imagine how it could be frustrating when things do not work as expected.
     
    We will try the following methods and check if it helps.
     
    Method 1: Enable adaptive brightness and see if brightness improves:
     
    1. press Windows + X key together on the keyboard button.
    2. Select Control Panel.
    3. click on power under Control Panel Options.
    4. Select the settings of under balanced plan.
    5. click on change advanced power settings.
    6 expand the view.
    7. turn on the Enable Adaptive brightness.
     
    If this method does not improve the brightness of the screen, turn off Adaptive brightness allow once again.
     
    Method 2: If you still face the question, I suggest to download graphics drivers on the manufacturer's Web site and follow the link below and install the drivers of graphics card in compatibility mode.

    Additional reference:

    If the problem persists check the link below and follow the suggestions of Miguel

    Sony VAIO - hardware & networking community
     
    Hope this information helps, just reply to the State of the question to get help.
  • HELP computer laptop has frozen with power on a black screen and flashing lights

    Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!

    Hello

    Try a Hard Reset as follows.

    Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

    If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.

    Kind regards

    DP - K

  • Computer laptop G350 has no sound from speakers

    Well, he came to me to have post a thread after searching the Internet for a few days.

    Computer laptop Lenovo, Vista installed.

    Sound worked perfectly that what it suddenly stopped.

    I plugged in the headset and headphones. None worked.

    This change seems to have occurred after the software installation, Windows Update probably.

    I tried most of the things people have suggested.

    The only temporary fix is a restoration of the system for a few days before when I still had sound. It worked a little, and then he returned to no sound.

    This is not a hardware issue, I can tell you that much.

    At the same time as this, my Itunes has the problem where it will play all the songs and diamond indicator will not move.

    They are connected by a kind of fu * audio upward.

    So... does anyone have solutions that they could share? System Restore fixed the two questions for me, but it does not last.

    See you soon

    Uninstall the audio drivers. Download the latest drivers available (in this case, from the manufacturer's Web site) and install.

  • Setting up computer BIOS HP p2 1334 give me white screen!

    I want to downgreade for win 7

    so I read this page

    http://aplocher.WordPress.com/2012/10/31/installing-Windows-7-on-an-HP-P2-1334-desktop-PC/

    When I go to step "go in the computer Setup.

    When I enter the configuration of the computer in bios

    It gives me the white screen, it does not show up another white whitout screen thing

    can someone help me with this?

    Hello

    You use the VGA or DVI - D port? Try using a different, a new cable and another monitor to see if you can get the picture on a screen.

    If this does not work, either install a PCI video card to get the image on the screen to be able to go into the BIOS or try to remove the memory modules, the CMOS battery, the power connector on the system board and the external supply of the cord and keep the power button down for 30 seconds. Reconnect everything and see if it helps.

    Let me know the results of it.

    Thank you

  • 'no signal' when connecting TV to computer laptop presario 900

    Original title: using a television to show the DVD screen is played on a computer laptop presario 900,.

    How can I use my TV screen to show a DVD is played on a presario 900, I connected both with a VGA cable, but the display shows "no signal".

    What do you mean, "I connected the two with a VGA cable. You have more than one TV, you have tried?

    Have you ensured that the laptop is out the signal from the VGA connector? Usually, you press a key (or key combination) to switch the signal between the built-in screen, external monitor, or both.

    It is possible, that you need to go to the display settings on the computer and turn on the external screen, but first check material method.

  • My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

    Original title: HDMI sound

    I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

    Hello

    System Restore does not have this long period of time.

    You may want to refer to the suggestions in the thread below link and check.

    No sound via HDMI output portable computer connecting to TV

    I hope this helps.

  • Computer laptop screen locked after trying to download a free drawing software now can not deactivate or close the screen

    computer laptop screen locked after trying to download free software for drawing fast vector engineer tools and now the break is unable to calculate or close the screen

    Thank you

    Bill

    If your computer is bad, you need to do a system restore. Since it seems that you can not stop, try to hold the power button until it turns off. If this does not work, unplug (if laptop, remove the battery).

    From there on, allows to do a restore:

    1. turn the computer on and start to tap F8 to get the start menu
    2. Select repair your computer
    3. Select System Restore
    4. Follow the prompts

    If the restore point is older, feel free to use the Scan for affected programs feature to make sure that no other programs are affected. Otherwise, I would make a note of it, as it will have to reinstall these programs. In addition, I was running updated Windows once your system working again, since you will most likely use a restore point set up just before an update. (no point in re-opening of a security breach)

  • Lost sound on my computer laptop advent

    Hello. recently, I installed windows 7 on my computer laptop advent and lost its one with abit of help please?

    Original title: wondows7

    Hi Dave,.

    This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

    Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

    No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

    Thank you.

Maybe you are looking for

  • Win XP Home on M100 (no recovery cd) - lan driver intel 82562ET

    Hello According to http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=NL&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 98584 & DISC_MODEL = 0 I have an on-board Intel NETWORK card (8256ET be am). I don't have a rec

  • DeskJet 3050 a: Stampante hp operating system mac 10.12 codice error 0xb04020a5

    Codice error 0xb04020a5 perch?

  • DLL to control a relay

    Hello I have to automate a testbed project of end of studies, I do so my first test with Labwindows. I apologize then pour any question which you think beast. Pour to generate a voltage of 5V (high level of the United Nations and a low level) pour Co

  • Get the container element

    I created a container that contains numbers and strings of elements. I would like to pass the one element to a vi. But I don't know how to extract the element respectively. Is there a way to get the items in the container one by one? Something like:

  • Mass effect 2 problem

    Hello I have windows 7 Home Edition and that you can't mass effect 2 to install. After a bit of installation, he said: Failed installation. A data error occurred. It is supposed to be windows 7 compatible. I tried running the compatibility problems,