Setting up computer BIOS HP p2 1334 give me white screen!
I want to downgreade for win 7
so I read this page
http://aplocher.WordPress.com/2012/10/31/installing-Windows-7-on-an-HP-P2-1334-desktop-PC/
When I go to step "go in the computer Setup.
When I enter the configuration of the computer in bios
It gives me the white screen, it does not show up another white whitout screen thing
can someone help me with this?
Hello
You use the VGA or DVI - D port? Try using a different, a new cable and another monitor to see if you can get the picture on a screen.
If this does not work, either install a PCI video card to get the image on the screen to be able to go into the BIOS or try to remove the memory modules, the CMOS battery, the power connector on the system board and the external supply of the cord and keep the power button down for 30 seconds. Reconnect everything and see if it helps.
Let me know the results of it.
Thank you
Tags: HP Desktops
Similar Questions
-
When I try to change user my computer freezes and I just get a white screen
white screen
Hi Pete Spong
Thank you for using the Microsoft Answers Forums!
I would like to ask you a few questions to help focus in the right direction:
Since when you receive this error message? Have you made changes to your system?
Try the following steps:
Step 1:
Put the computer in a clean boot (namely if any third-party software hinders the process)
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
(Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)
Step 2:
Install this update if it is not already installed on your computer and check.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Flash Player 10 gives a white screen on the mode full-screen Mac OSX10.4
Farmville on required FireFox: Flash Player 10.1 be installed. After download and installation, mode full screen does not work, produces only white screen. I deleted the cache and restarted, Javascript is enabled, popup windows are not blocked up. What can be done? Help, please. This is my mom's computer and she needs full-screen in order to appreciate its Farmville. We want all our Mamas to use their computers, don't we? Thank you very much for any assistance provided.
What I mean is that if the "Enable hardware acceleration" option is checked, try to uncheck. (Hardware acceleration is a feature of the video card on various brands, not just Intel.)
-
It no longer seems to be an option to set the default page for a new tab. I want to by default to my home page as before. I passed on the user forum and followed the advice to install a "Newtaburl" but it did not work.
Hi, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.
Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.
Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.
You will then need to restart Firefox for all changes to take effect.
If your question is resolved by this or another answer, please take a minute to let us know. Thank you.
-
White screen after starting the desktop computer
Original title: Windows 7 white after the start of desktop screen.
When windows starts my desktop appears for 5 seconds and then the screen become white. I can't do any of that except the computer restarts. When I do this, white screen closes and I see my office, but which also closes and the system restarts with the same question. It seems that something is loading right after my office that does not... I can't access to my office to see what is on... Any thoughts on how I can fix this, other than a system restore?
I have a solution
First of all causes of white screen most of the files exe as spyware or viruses is the best way to solve this boot
on winpe CD or DVD from winpe, the research of malicious software which load at startup
If you don't know what file is it tries to start the Task Manager when connecting
to do this, go to system32 and then make a copy of cmd.exe and rename the copy sethc.exe and replace the current sethc after this restart let it connect normally, then pass the user pressing a win + l and then press SHIFT 5 times then a command prompt should appear then type taskmgr.exe and then find the process and kill it and remove via msconfig or winpe sorry for my bad English
-
need the simple way to set the computer back to factory settings, and already saved safe data
need the simple way to set the computer back to factory settings, and already saved safe data
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
My stop laptop periodically and gives the following codes:
BCCode d1
BCP1 00000010
BCP2 00000002
BCP3 00000001
8A25F1C8 BCP4I was not able to find a solution to restart windows by clicking find a solution online. The system is free of viruses and other items malcious. Any ideas would be helpful because my laptop did not come with a repair disc and I'm afraid to make one with these questions.
Thank you
Hello
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of problems and when you get to the section driver view
for generic methods in the next message and then back to the if necessary troubleshooting tool.BCCode: D1 0x000000D1
Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
======================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I am trying to download creative cloud set up on my mac, but it gives me the ability to run the download can someone guide me through the download on a mac?
Heather
The first step is to download and install the Adobe Creative Cloud Desktop application on your computer. The application of CC Office then handles the rest of the installation.
You can download the installer for Creative Cloud from here:
Creative cloud help | Creative cloud desktop.After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe.
This link will guide you through the steps:
Using creative cloud | Download, install, update or uninstall applications
Kind regards
Guinot
-
How to change the SATA mode to AHCI, no setting on the BIOS (Aspire E5 - 471P)
How to change SATA to AHCI mode. Any setting in the BIOS (Aspire E5-471P-35Y2)
Are you sure that your system is not already on AHCI?
-
Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer
The link below has options to solve your problem of loop.
http://support.Microsoft.com/kb/949358>
04:17:0407/17/11
-
software licenses reported that the computer BIOS is missing a required license
- software licenses reported that the computer BIOS is missing a required license
http://social.Microsoft.com/forums/en-us/genuinevista/thread/3e1da59f-AA81-446d-a1b9-582c61e158d3 if this post answered your question, click mark as answer .
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
The computer BIOS is missing a required license
The computer BIOS is missing a license required, in order to help me
Try the following:
Click Start, right click on computer
Click on properties
Scroll down to the Windows Activation
Click on the link 'change product key '.
Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
-
I use a laptop HP H250 running Windows 8.0. Since yesterday whenever I search something on the machine it gives a blank screen and then start back on the desktop. An analysis of the system and the registry has verified. Can anyone help?
Hi Courtney,
This issue may have caused due to some missing or corrupted files in the computer. I would like to know some information about this problem so that we can help you further.
1. have you made changes on the computer before this problem?
2. do you get any error code or error message while starting?
3. are you referring to the Virus scan by "system scan"?
I would suggest trying the following methods and check if it works for you.
Method 1:
Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you find and fix common system issues on your computer.
Follow the steps to run the Troubleshooter:
(a) press Windows + Q together get the search option.
(b) the type of Troubleshooting on the search option, and then select Troubleshooting.
(c) click show all on the left side panel.
(d) click on The Maintenance of the system and follow the instructions to run the troubleshooter.Method 2:
Put the computer in a clean boot state, and check if the problem persists. This process will help you determine which third party/PPP program is causing this problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.Please reply with the status of the issue so that we can better help you.
-
Could not update to 11.0.15 because "Adobe application manager is running." I can't find Adobe Application Manager on my computer to close. What gives?
Hi michaell67763173,
Which operating system you are using?
> Restart your computer and then try to update again.
Or
Mac: Adobe all force them to leave the activity monitor processes (for example Adobe application manager, sync Core, Desktop Services, broker CIB Adobe Adobe, Adobe Crash demon etc..)
Windows: Force quit Adobe all processes from the Task Manager (for example Adobe application manager, sync Core, Office Services, Adobe, broker IPC from Adobe, Adobe Crash demon etc..)
Let us know if that helps.
Maybe you are looking for
-
Neccessery on custom recovery to get the update?
So I have the motorcycle G(1st Gen). I rooted it and a bootloader unlocked. However, I'm on stock ROM. But I have roots there via CWM recovery. Now, I heard that to get the update on your device, I must be on the recovery of stocks. Is this true? If
-
I can't find the post I recently set up here. Have you had an accident which deleted all recent messages?I wanted to write comments to a suggestion that I got here, which was the use of Acronis as a backup manager...Manufactured by MowGreen - thank y
-
How can I activate the CD autoplay in Windows XP
How can I activate my CD-ROM AutoPlay feature in Windows XP?
-
Microsoft offers a download to remove a locked dll file
I am manually removing any iTunes (installation has been altered) there is a file in the iTunes folder called itunesminiplayer.dll I get access is denied, the file is locked (iTunes offer no. HELP WITH THIS) there are software available but it comes
-
Am ok with this installation route win 8 and oops.
HP dv7 7247 cl Here is where I am. On my SSD, I could only install via the legacy mode. HP Bios/UEFI wouldn't let me go this route (at least no I can see). So I made the mistake of putting in my drive HARD ((2nd bay) (unformatted) and he replaced my