Computer laptop ASUS US50 recover to the original with a disc settings.

Similar Questions

• How can I re - install Windows XP on a Compaq computer laptop that I bought? The original owner has Linux Ubuntu top.

  my computer Compaq 6200, came with Ubuntu... I have windows... I don't understand the Ubuntu system

  Hello

  After you install a different OS (Ubuntu) on a HP (Compaq), you will have no recovery Partition to reinstall Vista from; HP says that.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  'A problem of common recovery. .

  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space. »
   

  Contact HP and ask them to send you a set of Vista recovery disc, what they will do for a small fee.

  "Order of the recovery disc for Windows 7, Vista or XP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&cc=us&DLC=en&product=18703

  See you soon.

• Computer laptop dv6 Pavilian: I need the original operating system for a Pavilian model dv6 dv6 1355dx

  I have upgraded to windows 10 and did not like it and tp attempt to restore the computer and accidentally erased my original windows 7. I then bought and installed windows 7 64 bit and the computer does not work properly; I need now the drive of 32-bit windows 7 original.

  Gurk

  Hello;
  
  Let me welcome you on the HP forums!
  
  I wish I had some good news for you, but I did not...

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This means that the stock HP is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929 

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I have a M8400f desktop. If I do a recovery, bios will be be recovered to the original?

  I have a M8400f desktop. If I do a recovery, bios will be be recovered to the original?

  Hello

  If you can access the options you need, I wouldn't worry too much - I hope that you will find that the problem with the start screen will be fixed in a future update.

  All the best,

  DP - K

• Computer laptop does not recognize not the charger.

  Original title: charger delivers

  My computer continues to give the message that it does not recognize the charger of my computer and is told to use a Dell charger - I use the Dell charger supplied with the computer.

  Is this a connection problem or is the battery discharged?

  Hello

  Thanks for posting! If I understand correctly, you are facing problems with the loading of the computer. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information.

  1. have there been recent changes to the system before the show?

  2. What is the brand and model of the computer?

  Method:

  Follow the link and run the fix it convenience store. Check if it helps.

  The problems of power consumption and extend laptop battery life

  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Reference: http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=51941

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266440

  If the problem persists, I suggest you to contact the manufacturer.

  http://support.Dell.com/

  Answer us with the results. I'd be happy to help you further.

• computer laptop dv6-6023tx: properties of the unknown - Driver ACPI\HPQ0004 drivers

  Hello

  I recently had to install a new HDD in my laptop HP dv6-6023tx as the old unit has failed.  (Model No. LR733PA #ABG)

  I installed Windows and all the drivers that I can find, but I seem to be a lack...

  I always get an "unknown device" which shows details such as "ACPI\HPQ0004".

  Can you help me with the correct driver for this problem

  Thank you

  If you had used the support of HP recovery when you first set up your computer, you should not need to manually install the drivers for all of the unknown material. Since it seems that you have installed a generic copy of Windows, you will need to download and install several drivers of the HP Pavilion dv6-6023tx Entertainment Notebook PC - software and driver page. The specific driver for your problem should be ftp://ftp.hp.com/pub/softpaq/sp64001-64500/sp64144.exe

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Have two Copies of Windows XP Home Edition on the computer. How can I remove the original copy of Windows?

  Recently, I had to reinstall the operating system on my computer because I became aware of virus and I couldn't afford to take it to a professional, and I thought I could fix it myself. I decided to go ahead, but I discovered when I booted my computer, it shows the first copy of Windows as well as the new copy, which, in fact, turns out to be better than the original. Now, I would like to know how to remove the first one because it takes a lot of memory space and it for lack of place the proformance with the second copy. If it's too complicated and you think I should take it to someone who knows better than me, then so be it. If it is not too much to ask, I would like to have an answer soon enough. Thank you, Christine

  This might help...

  http://www.ehow.com/how_5030155_remove-dual-boot-XP.html

• A virus wiped my computer needs now Windows reactivated while the original key does not work!

  One of the worst virus I've never erased from my computer and caused a huge problem.

  After restoring the computer to the original settings window asked to be activated.

  After the product key that is on my computer, he said it was not valid and I might be at risk of fraud. The problem is that it is this computer that previously used!

  What should I do?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• File recovery does not file recovered from the original folder

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

  I think you'll be lucky to get anything.  Where a file is no not part of the file - it's the metadata stored elsewhere, so it is not possible to recover the files to their previous location.  In the future, it would be much easier to restore files if you have a backup.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

• Get original Vista OS on computer laptop back non genuine windows 7 ultimate with no cd?

  Hi, I'm trying to get the original Vista OS on my laptop after having been "upgrded" I don't have the CD to install windows 7 ultimate (I think a trial) but I don't have the code to reinstall vista original key WHEN I can find the download for Vista OS! Can anyone help? PS I'm NOT as good with the PC so please if you can help, give an idiots guide (step by step).

  Thank you

  Simon

  You must contact the manufacturer of your laptop and see that if the disk system restore or recovery for your laptop is available, usually they will send it for a small fee.

  You could also see if this article applies:

  http://support.Microsoft.com/kb/971760

  writing in the new message: * e-mail address is removed from the privacy... *

  Hi, I'm trying to get the original Vista OS on my laptop after having been "upgrded" I don't have the CD to install windows 7 ultimate (I think a trial) but I don't have the code to reinstall vista original key WHEN I can find the download for Vista OS! Can anyone help? PS I'm NOT as good with the PC so please if you can help, give an idiots guide (step by step).

  Thank you

  Simon

• Computer laptop screen goes black when the HDMI cable is connected

  Help me please

  A few days before, after upgrading to windows 7 from Vista.  I got my laptop connected to my 47 inch Phillips with HDMI and was doing great.  The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

  Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything...  I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour)  If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

  Please help me.  Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.)  This thing cost me 5 k and there was nothing else to headaches.  He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me.  Thanks again for the help.

  II. Configuration

  
  Processor (s)
  

  • Processor - 1
    • CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
    • CPU_Manufacturer-GenuineIntel
    • CPU_Caption-Intel64 family 6 model 23 Stepping 10
    • CPU_Version-model 7, walk 10
    • CPU_ProcessorId-BFEBFBFF0001067A
    • CPU_CurrentClockSpeed - 2534 MHz
    • CPU_AddressWidth-64 bit
    • CPU_DataWidth-64 bit
    • CPU_SocketDesignation-Socket 479

  
  Case color - black
  

  
  System memory
  

  • Memory-1 module
    • Mem_Capacity - 4096MB
    • Mem_BankLabel-DIMM #1
    • Mem_Type-DDR3
    • Mem_Frequency-MHz
  • Memory Module-2
    • Mem_Capacity - 4096MB
    • Mem_BankLabel-DIMM #2
    • Mem_Type-DDR3
    • Mem_Frequency-MHz

  
  BIOS information
  

  • BIOS_Manufacturer-Alienware
  • BIOS_Name - worm 1.00PARTTBL A01
  • BIOS_Version1-A01
  • BIOS_Version2-ALWARE - 6040000

  
  Information of the motherboard
  

  • MB_Manufacturer-Alienware
  • MB_Product
  • MB_SerialNumber-.4Q9V4K1. .
  • MB_Version-A01

  
  Video adapter
  

  • Video_Caption-NVIDIA GeForce GTX 280M
  • Video_AdapterRAM - 1024Mo
  • Video_DriverVersion - 7.15.11.7985

  
  Hard drives
  

  • SSD SAMSUNG PM800 Se SCSI Disk Device
    • Disk_Model - SSD SAMSUNG PM800 Se SCSI Disk Device
    • Disk_Size - 256GB
    • Disk_TotalHeads - 255
    • Disk_TotalCylinders - 31132
    • Disk_TotalTracks - 7938660
    • Disk_TracksPerCylinder - 255

  
  Optical drives / other storage
  

  • TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device

  
  OS - MS Vista Home Premium 64
  

  
  Version of DirectX-10
  

  
  Assembler initials-RR
  

  
  Initial Tester - HAVE
  

  
  Test Date-09/07/2009 03-23 h
  

  
  Burn-In/benchmarks
  

  • 3DMark Vantage 1.01
    • AWMarks AWMark Score - 10659
    • Graphics Score - 10850 Points
    • CPU Score - 10125 Points
    • Figure 1 - Jane Nash - 31 FPS test
    • Test chart 2 - new FPS from Calico-32
    • Test CPU 1 - Test of the Plans/S I-1364
    • CPU Test 2 - Physics-14 steps/S
    • Test 1 - Texture Fill - 1034 FPS featured
    • Test 2 - Color Fill - 5 FPS featured
    • Test 3 - POM-26 FPS featured
    • Function Test 4 - GPU Cloth-18 FPS
    • Function Test 5 - GPU particle-24 FPS
    • Function Test 6 - noise Perlin - 44 FPS

  
  The IRQ configuration
  

  • 0 - available-
  • 1 PS/2 standard keyboard
  • 2 - available-
  • 3 - available-
  • 4 - available-
  • 5 Ricoh Memory Stick Controller
  • 5 Ricoh SD/MMC Host Controller
  • 5 Ricoh xD-Picture Card Controller
  • 5 SDA Standard compatible SD Host Controller
  • 6 - available-
  • 7 - available-
  • 8 high precision event timer
  • 9 - available-
  • Infrared receiver ITECIR 10 (CBS)
  • 11 - available:
  • 12 Synaptics PS/2 Port TouchPad
  • Digital data processor 13
  • 14 RICOH OHCI Compliant IEEE 1394 Host Controller
  • 15 - available-
  • 16 NVIDIA nForce Serial ATA Controller
  • Standard enhanced PCI to USB Host Controller 16
  • 17 high Definition Audio Controller
  • 18 PCI standard PCI to PCI bridge
  • 18 standard enhanced PCI to USB Host Controller
  • NVIDIA GeForce GTX 280M 19
  • OpenHCD USB host controller standard 19
  • NVIDIA GeForce GTX 280M 20
  • 22 NVIDIA GeForce 9400M G
  • 23 Broadcom 802.11n network adapter
  • 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
  • OpenHCD USB host controller standard 23
  • System compatible ACPI Microsoft 190

  
  Various
  

  
  Final control
  

  
  Installed device drivers
  

  • Microsoft adapter, 21/06/2006, 6.0.6001.18000
  • Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
  • Infrared receiver ITECIR (EC), 18/12/2007, 5.0.4.6
  • Standard keyboard PS/2, 21/06/2006, 6.0.6001.18000
  • Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
  • Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
  • Enumerator Microsoft Bluetooth, 21/06/2006, 6.0.6001.18064
  • Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
  • Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
  • Bluetooth L2CAP interface, 23/01/2008, 6.2.0.1200
  • Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
  • Audio stereo Bluetooth, 28/01/2008, 6.1.0.4000
  • Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
  • IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
  • Compatible device HID, 21/06/2006, 6.0.6001.18000
  • Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
  • Compatible device HID, 21/06/2006, 6.0.6001.18000
  • Keyboard Microsoft eHome, 21/06/2006, 6.0.6001.18000 remote control
  • Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
  • MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000 Microsoft eHome
  • Mouse compatible HID, 21/06/2006, 6.0.6001.18000
  • Compatible device HID, 21/06/2006, 6.0.6001.18000
  • Device keyboard HID, 21/06/2006, 6.0.6001.18000
  • Mouse compatible HID, 21/06/2006, 6.0.6001.18000
  • Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
  • NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
  • NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
  • NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
  • NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
  • Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
  • Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
  • RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
  • Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
  • Ricoh xD-Picture, 16/06/2008, 6.0.1.13 card controller
  • Broadcom 802.11n network adapter, 28/01/2009, 5.10.79.7
  • facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
  • Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
  • TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
  • SSD SAMSUNG PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
  • Shadow-generic volume, 21/06/2006, 6.0.6000.16386
  • Webcam integrated, 27/12/2008, 1.1.1.1227
  • USB Human Interface device, 21/06/2006, 6.0.6001.18000
  • Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
  • USB Human Interface device, 21/06/2006, 6.0.6001.18000

  Do not forget that this upgrade to Windows 7 now.  Thank you

  My best guess, not knowing what updates you have loaded, would be that you got a video update from Microsoft that may not be 100% compatible with your laptop.  I would go to the manufacturer website and download the latest video drivers for your laptop and install them according to the manufacturer's suggestions.

  "Vukne" wrote in the new message: * e-mail address is removed from the privacy... *

  Help me please

  A few days before, after upgrading to windows 7 from Vista.  I got my laptop connected to my 47 inch Phillips with HDMI and was doing great.  The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

  Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything...  I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour)  If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

  Please help me.  Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.)  This thing cost me 5 k and there was nothing else to headaches.  He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me.  Thanks again for the help.

  / II. Configuration

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  /Processor (s)
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * Processor - 1
  * CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
  * CPU_Manufacturer-GenuineIntel
  * CPU_Caption-Intel64 family 6 model 23 Stepping 10
  * CPU_Version-model 7, walk 10
  * CPU_ProcessorId-BFEBFBFF0001067A
  * CPU_CurrentClockSpeed - 2534 MHz
  * CPU_AddressWidth-64 bit
  * CPU_DataWidth-64 bit
  * CPU_SocketDesignation-Socket 479

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Case color - black
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  System memory
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * Memory Module-1
  * Mem_Capacity - 4096MB
  * Mem_BankLabel-DIMM #1
  * Mem_Type-DDR3
  * Mem_Frequency-MHz
  * Memory Module-2
  * Mem_Capacity - 4096MB
  * Mem_BankLabel-DIMM #2
  * Mem_Type-DDR3
  * Mem_Frequency-MHz

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  BIOS information
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * BIOS_Manufacturer-Alienware
  * BIOS_Name-worm 1.00PARTTBL A01
  * BIOS_Version1-A01
  * BIOS_Version2-ALWARE - 6040000

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Information of the motherboard
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * MB_Manufacturer-Alienware
  * MB_Product
  * MB_SerialNumber-.4Q9V4K1. .
  * MB_Version-A01

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Video adapter
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * Video_Caption-NVIDIA GeForce GTX 280M
  * Video_AdapterRAM - 1024Mo
  * Video_DriverVersion - 7.15.11.7985

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Hard drives
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * SAMSUNG SSD PM800 Se SCSI Disk Device
  * Disk_Model-SAMSUNG SSD PM800 Se SCSI Disk Device
  * Disk_Size - 256GB
  * Disk_TotalHeads-255
  * Disk_TotalCylinders-31132
  * Disk_TotalTracks-7938660
  * Disk_TracksPerCylinder-255

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Optical drives / other storage
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  OS - MS Vista Home Premium 64
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Version of DirectX-10
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Assembler initials-RR
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Initial Tester - HAVE
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Test Date-09/07/2009 03-23 h
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Burn-In/benchmarks
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * 3DMark Vantage 1.01
  * AWMarks AWMark Score - 10659
  * Graphics Score - 10850 Points
  * CPU Score - 10125 Points
  * Test 1 - Jane Nash-31 FPS chart
  * Test 2 - new Calico-32 FPS chart
  * CPU Test 1 - Test of the Plans/S I-1364
  * CPU Test 2 - Physics-14 steps/S
  Have test 1 - Texture Fill-1034 FPS
  Have test 2 - Color Fill-5 FPS
  Have test 3 - POM-26 FPS
  Have test 4 - GPU Cloth-18 FPS
  Have 5 test - GPU particles-24 FPS
  Have test 6 - noise of Perlin - 44 FPS

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  The IRQ configuration
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * 0 - available-
  * 1 PS/2 standard keyboard
  * 2 - available-
  * 3 - available-
  * 4 - available-
  * 5 Ricoh Memory Stick Controller
  * 5 Ricoh SD/MMC Host Controller
  * 5 Ricoh xD-Picture Card Controller
  * 5 SDA Standard compatible SD Host Controller
  * 6 - available-
  * 7 - available-
  * 8 high precision event timer
  * 9 - available-
  * Infrared receiver ITECIR 10 (CBS)
  * 11 - available:
  * 12 Synaptics PS/2 Port TouchPad
  * Digital data processor 13
  * 14 RICOH OHCI Compliant IEEE 1394 Host Controller
  * 15 - available-
  * 16 NVIDIA nForce Serial ATA Controller
  * 16 standard enhanced PCI to USB Host Controller
  * 17 high Definition Audio Controller
  * 18 PCI standard PCI to PCI bridge
  * 18 standard enhanced PCI to USB Host Controller
  * NVIDIA GeForce GTX 280M 19
  * OpenHCD USB host controller standard 19
  * NVIDIA GeForce GTX 280M 20
  * 22 NVIDIA GeForce 9400M G
  * 23 Broadcom 802.11n network adapter
  * 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
  * OpenHCD USB host controller standard 23
  * System compatible ACPI Microsoft 190

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Various
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Final control
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  http://social.answers.Microsoft.com/forums/en-us/HR.gif>
  Installed device drivers
  http://social.answers.Microsoft.com/forums/en-us/HR.gif>

  * Microsoft adapter, 21/06/2006, 6.0.6001.18000
  * Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
  * ITECIR Infrared Receiver (EC), 18/12/2007, 5.0.4.6
  * Standard PS/2 keyboard, 21/06/2006, 6.0.6001.18000
  * Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
  * Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
  * Microsoft Bluetooth enumerator 21/06/2006, 6.0.6001.18064
  * Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
  * Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
  * Bluetooth L2CAP Interface, 23/01/2008, 6.2.0.1200
  * Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
  * Bluetooth stereo Audio, 01/28/2008, 6.1.0.4000
  * Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
  * IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
  * HID-compliant device, 21/06/2006, 6.0.6001.18000
  * Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
  * HID-compliant device, 21/06/2006, 6.0.6001.18000
  * Microsoft eHome Remote control keyboard keys, 21/06/2006, 6.0.6001.18000
  * Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
  * Microsoft eHome MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000
  * Mouse compatible HID, 21/06/2006, 6.0.6001.18000
  * HID-compliant device, 21/06/2006, 6.0.6001.18000
  * HID Keyboard Device, 21/06/2006, 6.0.6001.18000
  * Mouse compatible HID, 21/06/2006, 6.0.6001.18000
  * Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
  * NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
  * NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
  * NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
  * NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
  * Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
  * Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
  * RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
  * Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
  * Ricoh xD-Picture Card Controller, 16/06/2008, 6.0.1.13
  * Broadcom 802.11n, network card, 28/01/2009, 5.10.79.7
  * facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
  * Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
  * TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
  * SAMSUNG SSD PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
  * Snapshot of generic volume, 21/06/2006, 6.0.6000.16386
  * Integrated Webcam, 27/12/2008, 1.1.1.1227
  * USB Human Interface Device, 21/06/2006, 6.0.6001.18000
  * Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
  * USB Human Interface Device, 21/06/2006, 6.0.6001.18000

  Do not forget that this upgrade to Windows 7 now.  Thank you

• How can I change the password on the computer when I don't remember the original?

  Original title: How can I change my password if I don't remember but don't know the pin code and I know the password to my e-mail attached?

  I don't remember the password to my computer as an administrator, but I don't know the pin code. I know my connected Hotmail account information and also the password but I don't remember the password so cannot download certain applications.

  So I would like to know how to change the password.

  Any assistance would be much appreciated!

  Thank you.

  You need the password to another one administrator-level account, or to the real real 'administrator' account?

  If you use an administrator level account, you can enable the built-in true ' administrator' account, connect on it (she has no default password because it is disabled by default) and reset the password of another account from there.

  To do this:

  1. Press + X to display the context menu, and then click computer management.
  2. On the left, click local users and groups, and then select the users folder.
     On the right, you will see the account named Administrator.  There must be an arrow down to this topic icon, indicating that the account is disabled.
  3. Double-click the administrator account, and then uncheck the "account is disabled".  Click OK to save your changes.
  4. Close the computer and connection to the administrator account.
  5. Back to the same page of user management.  Right-click on the account with the unknown password and choose set password to set a new.
  6. Open log on to the administrator account and your regular account.
  7. Go back once more on behalf of users and disable the administrator account.  You want to book it only in an emergency - if something had to get changed or broken in the administrator account, you have a downturn in the future to use.

  I hope this helps!