Computer makes random twittering sound?

Similar Questions

• My computer makes a snoring sound.

  My computer makes a snoring sound.  As a plane ready to take off.  What happens and why is it.  Wake up it is so strong.

  This is probably caused by one of your fans. If we took some dirt over time, this can cause a loud hum when it is activated.
  Try and figure out what the origin of the noise, if it is not the CPU fan, you can probably clean them yourself using a can of compressed air or a vacuum cleaner (careful with PC components!). If the CPU fan, it may be better to have an expert to clean or replace.

  If you find that the noise comes from your diet, you would be best to replace it.

• my computer makes a plaintive sound, he has not done before and since then the cd door does not open, I close it out but still makes noise

  the noise is like a high-pitched moan

  Hello Boomer09,

  Thank you for your message.  This sounds like something is stuck in your CD/DVD.  Most of the models have a small hole at the front.  You can usually use a paperclip (or something of this size) to push through the hole and the drawer opens manually.  If it is stuck, you can open the drawer and eliminate the problem.  Otherwise, it could be a hardware failure and you will need to replace it.  You always have the possibility to open your computer and remove the power cables to your drive.  This will stop the sound, but you will not be able to use the drive.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer makes a humming sound noisy, suddenly whenever I'm playing music.

  I'm having the same problem of snoring.  It happens in Google Chrome, Microsoft Internet Explorer, Mozilla Firefox, Windows Media player, essentially all the music or video content acts as buffer does not work.

  Yes, Crashplan that made it was that my computer to stutter.  Microsoft issues forum does not appear to have a way to compose your own answer, an answer, but that's it.  So if someone else want to parrot just my post here, I can give you an answer of credit.

• My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  Several clues:

  1. HARD and SATA drive in the message... On the way SATA HARD drive
  2. Clicking noise, which is an early signal of imminent death for HARD drive (there are only two types of readers... those who died and those who will be)

  I would like to start keep good clones (CarbonCopyClone, bombich.com, $40) for external drives or backups Time Machine.  Any backup of the drive, not just your favorite parts.  Perform backups on a schedule without fail IMHO.

  You can also start to consider a SSD at macsales.com (their mercury collection is highly recommended) or a new HARD disk, at least start planning if the SSD cost is worth the benefit of speed on the HARD drive.  You can buy it later.

  Just my paranoid approach to this situation.

• My computer has just been deleted/cleaned due to virus, when I press on what anyone, my computer makes click sound

  When I press on what anyone, my computer makes click sound... How can I stop it

  Original title: click sound

  Locate the speaker icon in the system tray. Mouse right click and set the volume to zero or select mute. Or the other of these actions will remove the clicks but also all other sounds. This includes audio media player and others.

  -OR-

  Navigate to Control Panel All Items Sound. Click the sounds tab choose model of sounds. (Usually set to default Windows.)

  See the list in the program events window. Set if they are boring to something else or climbs to (none). Out OK.

  Tom Ferguson

• Aspire T180 won't start and makes a beep sound

  My Aspire T180 not boot at all and makes a beep sound. The monitor doesn't wake up. The sound signal is a long beep followed of two short beeps - all in about one second of 1 1/2 to 2 life. My nephew has recently completed a 2-year computer program. I had to listen to him over the phone and he immediately said "Oh!" Your memory is bad! »

  A second opinion? And if it's a memory problem, the two modules DDR2 which are to replace, or something deeper? Any help will be appreciated. Thanks in advance.

  1 long, 2 short beeps

  Error message - video system failure

  Description - an error has occurred in the ROM BIOS video, or a failure to trace level was met.

  Trye first resetting the BIOS, remove the battery for about 5 min and put again, check if its help.

  Otherwise get out your DDR2 modules and only for slot which was empty before connecting.

  If you have integrated graphics card, use of trye update one if you have on your motherboard.

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• computer makes a noise like a spinning cd when no cd is inserted

  My computer makes noise like a spinning cd, every minute or two, when no cd is inserted.  When he does that the computer is running very slowly.

  Hello
   
  1. have you made changes on the computer recently?
  2. do you have any security software installed on the computer?
  3. When you hear noise, CD/DVD light flashes on tour that is CPU?
   
  If there is no disk in the CD/DVD drive and this problem occurs, this means that some programs/programs is / are using lots of system resources. There is a possibility of virus running on the computer and also due to errors on the hard drive.
   
  It is recommended that you first scan the computer for viruses and check if the problem persists. To scan a complete service, visit the following link: http://onecare.live.com/site/en-us/default.htm

  If the problem persists, run the check disk on the hard disk. To do this, follow these steps.
  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.
  2. type chkdsk /f /r and press ENTER.

  For more information about the disk check, see this link: http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-for-errors
   
  If the problem persists, then follow all the steps mentioned in this article to discover the culprit who raises this question: http://support.microsoft.com/kb/929135
   
  NOTE: Be sure to follow step 7 to reset the computer to start as usual.
   
  To troubleshoot the performance of the system, check the links below for more information.
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  http://support.Microsoft.com/kb/959062
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Computer restarts randomly.

  My computer restarts randomly without reason every once and a while. I've updated the drivers for my graphics card and that he kept to restart for a week but now it is doing it again.  Here is the Info for the error that is displayed after the restart.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA800359D4E0
  BCP2: FFFFF8800F9CC51C
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\110914-30170-01.dmp
  C:\Users\The Nelson Family\AppData\Local\Temp\WER-50871-0.sysdata.xml

  Any help would be great.

  Hello

  Thanks for posting your query in Microsoft Communities.

  I'm sorry to know that you are experiencing random system failures and restarts. Let me help you with this problem.

  116 code indicates that an attempt to reset display driver and recover a timeout failed. It designates the graphics settings in relation to the programs of those who are using your graphics card.

  1. What is the brand and model of the PC?

  2. only the computer restarts when you use a particular program or a game?

  I suggest you to reinstall the card graphic/display driver and check if it helps.

  1. Open Device Manager by clicking on the button 'Start '.
  2. Click on the "Control Panel", "System and security", then click on Device Manager under "System",".

  3. In the list of hardware categories, find "adaptateur adapter display, right-click on the display device.

  4. Click on the "Driver" tab, click "uninstall."

  Now, download the driver from the manufacturer's Web site and install it.
  Refer to the section:
  To download or get up-to-date driver yourself

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know if it helps. If you have any other questions, we will be happy to help you.
  

• My computer lost it's sound: "no audio output device is installed".

  My computer lost it's sound twice today because he has "no audio output device is installed". The first time, it fixed it's self after that I tried a few things and now that I tried those things again and waited a lot longer so I did the first time there is still no sound, please help (P.s. I'm using windows 7 and it's a laptop)

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I already turn to the backup car but the computer make them again, why?

  I already turn to the backup car but the computer make them again, why? He made my hard drive full... If I have to delete it after a while... How to stop this thing?

  Hello

  What backup program utility do you use?

  Meanwhile, refer to this link:

  http://Windows.Microsoft.com/en-in/Windows-Vista/back-up-and-restore-frequently-asked-questions

  However if you are using Windows Backup, then try to turn off shadow copy of Volume and check if the problem reappears. It manages and implements Volume Shadow copies used for backup purposes and others. If this service is stopped, shadow copies will be unavailable for backup and the backup may fail. If this service is disabled, any services that explicitly depend on will fail to start.

  Steps to follow:

  a. Click Start, type services and press to enter.
  b. Locate the "Volume Shadow Copy" service and right click and click on "Stop".
  c. close the windows Services.

  Please come back with more information.

• bought a new computer from W7. No sound from speakers?

  Connected old Altec Lansing speakers to new computer W7... no sound

  Check the clear sound, mute

• Can I make smaller the sound camera shutter? Fix to express and ps PS

  Dear team,

  How can I make the small shutter sounds?  iPhone 6 s cannot be change to the Japan.

  Because it is not allowed to take a photo without siunds in the public space in order to avoid photographing secrets.

  However, it doesn't have to be silent, but its tiny.

  In perhaps his case of the iPhone, I guess?

  Thank you

  Hi Shigemi-san!

  Thank you very much for posting. Yes, you can make the shutter sound a little quieter. Your ringtone is enabled, use the rocker side (volume buttons) to decrease the ringer volume. When you take a picture in the difficulty to express, the sound should be quieter.

  Let me know if that helps!

  -Kathleen

• button that makes random location of objects, when clcked new del the old stuff.help tips & reputs

  Hello everyone I am doing a program when I click on the randomize button it puts random objects in a given area and if you click on the button again it must remove objects and put on a new random object model.

  need help!

  from the moment I have only an error message "or is unexpected", but I'm afraid that my night idea does not work help please!

  to import flash.geom.Point;

  import flash.events.MouseEvent;

  var number: Number = 1

  var scale: Number = new Number().

  var treeList:Array = new Array();

  var grass1List:Array = new Array();

  var grass2List:Array = new Array();

  var grass3List:Array = new Array();

  var grass4List:Array = new Array();

  var grass5List:Array = new Array();

  rdm_btn.addEventListener (MouseEvent.MOUSE_UP, Random);

  random function (e:MouseEvent): void

  {

  If (no < 3)

  for (var p:Number = 0; p < 500; p ++)

  {

  var grass5:Grass5 = new Grass5();

  var tempPointGrass5:Point = new focus();

  tempPointGrass5.x = Math.floor (Math.random () * 1000);

  tempPointGrass5.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointGrass5.x, tempPointGrass5.y))

  {

  grass5.x = tempPointGrass5.x;

  grass5.y = tempPointGrass5.y;

  grass5. ScaleX = grass5.scaleY = (tempPointGrass5.y/650);

  grass5List.push (tempPointGrass5);

  addChild (grass5);

  }

  on the other

  {

  p-- ;

  }

  }

  for (var q: Number = 0; q < 500; q ++)

  {

  var grass4:Grass4 = new Grass4();

  var tempPointGrass4:Point = new focus();

  tempPointGrass4.x = Math.floor (Math.random () * 1000);

  tempPointGrass4.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointGrass4.x, tempPointGrass4.y))

  {

  GRASS4.x = tempPointGrass4.x;

  GRASS4.y = tempPointGrass4.y;

  GRASS4. ScaleX = grass4.scaleY = (tempPointGrass4.y/650);

  grass4List.push (tempPointGrass4);

  addChild (grass4);

  }

  on the other

  {

  q-- ;

  }

  }

  for (var v: Number = 0; v < 500; v ++)

  {

  var grass3:Grass3 = new Grass3();

  var tempPointGrass3:Point = new focus();

  tempPointGrass3.x = Math.floor (Math.random () * 1000);

  tempPointGrass3.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointGrass3.x, tempPointGrass3.y))

  {

  grass3.x = tempPointGrass3.x;

  grass3.y = tempPointGrass3.y;

  grass3. ScaleX = grass3.scaleY = (tempPointGrass3.y/650);

  grass1List.push (tempPointGrass3);

  addChild (grass3);

  }

  on the other

  {

  v-- ;

  }

  }

  for (var t:Number = 0; t < 500; t ++);

  Ingore the code here

  var grass2:Grass2 = new Grass2();

  var tempPointGrass2:Point = new focus();

  tempPointGrass2.x = Math.floor (Math.random () * 1000);

  tempPointGrass2.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointGrass2.x, tempPointGrass2.y))

  {

  Grass2.x = tempPointGrass2.x;

  Grass2.y = tempPointGrass2.y;

  Grass2.scaleX = grass2.scaleY = (tempPointGrass2.y/650);

  grass2List.push (tempPointGrass1);

  addChild (grass2);

  }

  on the other

  {

  t-- ;

  }

  }

  for (var j: Number = 0; j < 500; j ++)

  {

  var grass1:Grass1 = new Grass1();

  var tempPointGrass1:Point = new focus();

  tempPointGrass1.x = Math.floor (Math.random () * 1000);

  tempPointGrass1.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointGrass1.x, tempPointGrass1.y))

  {

  GRASS1.x = tempPointGrass1.x;

  GRASS1.y = tempPointGrass1.y;

  GRASS1. ScaleX = grass1.scaleY = (tempPointGrass1.y/650);

  grass1List.push (tempPointGrass1);

  addChild (grass1);

  }

  on the other

  {

  j-- ;

  }

  }

  for (var i: Number = 0; i < 20; i ++)

  {

  var: tree = new Tree();

  var tempPointTree:Point = new focus();

  tempPointTree.x = Math.floor (Math.random () * 1000);

  tempPointTree.y = Math.floor (Math.random () * 1000);

  If (checkBoundary (tempPointTree.x, tempPointTree.y))

  {

  Tree.x = tempPointTree.x;

  Tree.y = tempPointTree.y;

  tree.scaleX = tree.scaleY = (tempPointTree.y/650);

  treeList.push (tempPointTree);

  addChild (tree);

  }

  on the other

  {

  i-- ;

  }

  }

  No ++

  No ++

  No ++

  on the other

  {

  non-

  non-

  non-

  treeList.length = 0

  grass1List.length = 0

  grass2List.length = 0

  grass3List.length = 0

  grass4List.length = 0

  grass5List.length = 0

  }

  }

  function checkBoundary(X:Number,_Y:Number):Boolean

  {

  If (X > 100 & & X 900 < & & Y > 220 & & Y < 500)

  {

  Returns true;

  }

  Returns false;

  }

  Describe your rectangle and call positionItemsF each time you want to make random/re-randomize the positions of the elements.

  var r: Rectangle = new Rectangle (100,200,300,300);

  var itemA:Array = [tree, grass1, grass2, grass3, grass4, grass5];

  positionItemsF();

  function positionItemsF (): void {}

  for (var i: int = 0; i<>

  If your items have upper left reg

  itemA [i] .x is randomF (r.left, r.left + r.width - itemA [i] .width);.

  itemA [i] there is randomF (r.top, r.top + r.height - itemA [i] .height);.

  }

  }

  function randomF(n1:int,n2:int):int {}

  If (n1<>

  Return n1 + Math.floor ((n2-n1+1) * Math.random ());

  } else {}

  Return n2 + Math.floor ((n1-n2) * Math.random ());

  }

  }