Operation of the USB ports on Windows 7 OS
I got a SAMSUNG laptop SF411 job fifth generation i5 on 64-bit WINDOWS7. It went wrong in the sense of windows updates have not been configured. To access the support online were trying trying to Mr J Haydee. But the problem has not been resolved. On fitness by using the recovery by the manufacturer disc, everything has restored except two USB 3.0 port. All required them to leave the internet have been downloaded programs, but the ports are completely inadmissible.
Can anyone provide any solution?
You probably have not installed driver USB 3. Visit the Samsung support and find the driver and install it. Sometimes the names of the drivers on these sites can be very mysterious, then you may need to do some detective to discover who it is.
CAUTION: Do not use one of these myriads of download of driver from the web sites. Most is either infections or contain little value.
Tags: Windows
Similar Questions
-
I have a Kyocera FS-820, but I could not able to install the USB Port in windows 7
I need to install my old printer is the Kyocera FS-820 printer which works properly on Windows XP, but when I bought a new laptop which has Windows 7 Home printing USB no longer works. I tried to install the driver, but unfortunately I could not able to find the USB port.
When I plug the usb PRINTER cable gives me an error of USB DEVICE NOT RECOGNIZE.
Can someone help me what are the installation step by step in my printer thank you
It seems that Kyocera has a driver for Windows 7 which you can download from their support site (download file - make sure the file name and where it is being recorded and then search for and double-click on the downloaded file to install it): http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=13988&rid=22655
-
How can I use the USB ports in Windows XP Mode?
Windows XP mode
I need to use the USB port, but are not available in Windows XP mode, how do they available?
Thanks, I need an answer soon.
Plug the USB device, click the USB menu
Click Attach device.
Please wait while this one is initialized.
-
I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.
Hello
1. what happens when you plug the device to your computer, you get an error message?
2. don't you make changes to the computer until the problem occurred?
I suggest you try the steps mentioned below and check if it helps.
Method 1:
Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.
Method 2: Try running the Fixit tool from the link below.
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/GP/hardware_device_problemsMethod 3: Also try to follow the steps from the link below.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196
Hope this information is useful.
-
Portege R100 - question about the installation of the USB port and Windows problems
Hello
I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?
I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?
I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.
Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)
The forum has a search function, but to help you look still these 2 wires:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921Here you can see that XP installation isn't very easy, but can be done successfully
as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want
the bios is accessible by pressing ESC and the Start button
-
I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP
I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.
O/S
Windows XP Pro 32-Bit
CENTRAL PROCESSING UNIT
Intel Pentium 4 2.80 GHz
Motherboard
Manufacturer - Eveshamvale.
Vend. ATI chipset.
Chipset model - ID5833.
Model Southbridge - SB200
The downloaded manual provides the following information
Model = P4SBA
= North Bridge chipset; SiS 651 - South Bridge SiS 962
CPU = Supports Socket 478 - Supports 400/533 MHz FSB
I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.
Hi Graham,
Thanks for posting your query in the Microsoft Community Forums.
I understand from the description of the problem, the USB ports don't work on Windows 7 computer.
I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.
Method 1
Run this fix - it and check if it helps.
Diagnose and automatically fix the Windows USB problems
http://support.Microsoft.com/mats/Windows_USB_diagnostics
Method 2
Reinstall the USB controllers.
This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.
It will be useful.
Let us know if you encounter problems with Windows in the future. We will be happy to help you.
-
Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.
Disconnect all USB storage.
Run this tool by do right click and choose 'run as administrator '.
Of course, all first extract it:
http://www.Uwe-Sieber.de/files/drivecleanup.zip
If your XP is 32 bits, use the Win32 folder.
Reset.
If you still can't find the drive, assign it a drive letter in disk management.
-
You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help
diana73,
First of all, make sure that you're connected Administrators account to do.
How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:
- Sign in as an administrator or as a member of the Administrators group.
- Click Start , click run and type compmgmt.msc .
- In the left pane, and then click disk management .
- Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
- Click change .
- Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
- Click Yes when you are prompted to confirm the drive letter change.
The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
This will work if I plug it into the USB Port of a desktop with Windows 7 HP?
I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?
Hello
Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.I hope this helps.
-
After Windows Vista update, the usb port does not recognize the external hard drive
My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port. Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is. Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7. But the installer does not work.
Windows 7 Professional 32 bit.
Hello Graboots,
Thank you for your message. You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer? You can try using a different cable, for this rule as well. Since it is a question of recognition, we remove the external devices before software troubleshooting. Do you get anything when you plug the printer (ie. a tinkle of connection)? Please let us know, we are looking forward to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
My keyboard is not recognized by windows when connected to the USB ports.
My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.
Original title: keyboard problem
Hi Caragata,
Perform the steps from the link below and see if it works.
Tips for solving problems of USB devices
Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.
Good day!
-
I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.
Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.Hi John,.
The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.
If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not. I think that USB 3.0 is marked with the blue wire around the ports.
-
the Windows 7 usb Installer may not work on the usb port 3
Windows 7 install usb does not work on the usb port 3 with 32 GB usb 3 keys, says he needs a cd/dvd driver?
but there is no cd drive in this machine.Works very well with an old USB 2 on usb 2 & usb ports 3 in the same machine.But no usb 3 key into a usb port 3?any ideas?Thanks anyway JW stuart.
I managed to find a way to do it, I needed to set the usb drivers 3 unzipped on a 2nd USB on usb port 2 to use when the Setup program has been started and lost the USB 3.the ol F6 trick always works with win 7 and is more flexible, now that it allows pilots more than just raid. -
Original title:
First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
(running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
"one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
so I click it and and called up pop-up windows
"the usb device not recognize."
display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
"Windows has stopped this device because it has reported problems. (Code 43) »
Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpgAlso the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.
Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...
- Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
- Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
- Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
- Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
- Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
- Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)
Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)
Hello
The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.
Maybe you are looking for
-
How to get the Pages to print postcards correspondence without borders/maps?
I have Pages 5.6.2 and I'm unable to print postcards correspondence without borders/cards. I have the margins are set to 0 and each adjustment in the format I can think. What I'm missing! Is there a simple fix or is this not possible? (I was able
-
I can't unlock the phone, also, I'm sure that I type the correct pass
I put the password for the lock screen, then I lock the phone (zte open), but when I try to unlock the device, pass fail.
-
Problem with subscription renewal
At first, they said that they could not use my credit card, then they confirmed that my subscription had been renewed now thay say that it has not been renewed? How can I contact Microsoft to resolve the problem. Kathy MacTavish
-
9810 keeps rebooting blackBerry Smartphones blackberry torch
My 9810 keeps restarting and I can't seem to connect to the desktop software. He gets a point and I get a white screen and it restarts again. operating system is OS7.0... From the restart when he was on the charger I add me some contacts from my sim
-
Need a few options on how to restore the X 200
My daughter went to school and completely screwed to the top of this machine. To make a long story short, to solve a network problem, she had a friend wipe the drive and reinstall Win7 (a copy not registered, no less!). If the thing is basically a