Computer stops loading cd rom

Similar Questions

• Computer stops loading after that user id is started loading but never finishes. Computer has worked fine for 3 years

  Computer has worked fine for 3 years. When it is loading windows mode that never stops loading it remains in this mode

  Hi, JoyceCarpenter,

  What changes have been made before this started happening?  You add new programs or uninstall programs?

  You are able to boot mode safe mode with networking?  Download the following tool and run a full scan to make sure that the malware has not infected the system.  You can disable restoring the system incase malware hides in the restoration (see the second link on how to disable the system restore)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-System-Restore-in-Windows-Vista/

  Run the System File Checker

  Right-click on the command prompt window and select run as administrator

  Type SFC/scannow

  Note: there is a space between SFC and / scannow

  Press enter

  Locate the log by opening run them and type %windir%\Logs\CBS

  Press Ok

  The following link shows how to replace corrupted files if necessary

  http://support.Microsoft.com/kb/929833

• Computer stops loading on WINDOWS\system32\drivers\crcdisk.sysrepair

  original title: WINDOWS\system32\drivers\crcdisk.sysrepair

  my laptop computer on windows\system32\drivers\crcdisk.sys stop

  Hello ernestoResto,

  You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.

  a. Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  N1ote: when you get the press quickly press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  b. Select your language setting, and then click Next.

  c. Select repair your computer.

  d. Select the installation of Windows Vista to be repaired, and then click Next.

  e. under System Recovery Options, select command prompt and type:

  CHKDSK [drive:] [/ p] | [/ r]

  [drive:] Specifies the drive to check.

  / p check even if the drive is not marked dirty, bad.

  /r locates bad sectors and recovers readable information (implies / p).

  WARNING: This could cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Computer not keeps freezing, no response from the keyboard or mouse, all pages and windows stop loading

  Original title: Vista pc keeps freezing.

  Hello

  My pc keeps freezing, as in no response of the keyboard or mouse, all pages and windows stop loading etc.
  I have to hold the power button to re boot.
  After restarting, it might work correctly for hours or only 2 minutes!
  Seems to be ok in safe mode.
  Any ideas?

  Hi jamesbil,

  Thank you for keeping us posted.

  Method-

  I wish that you uninstall Service Pack 2, and then repeat the repair facility.

  See the article-

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Note: A system restore will undo the changes on the computer. Earlier all applied settings will be lost.

  We know if you need help.

  Thank you.

• HP Pavilion laptop computer stops even if I return to setting original or factory

  Please help because I was closing my laptop without no reason. We turn-out in a blue screen with an error about incomptibility with the system. I have restore its original, but after 5 minutes, his stops. It is less than 1 year old laptop and I use it twice a week on the weekends.  Battery is not the problem and overheating is not also the reason because sometimes in less than 5 minutes after opening, its stop itself. Hope you could help me to fix it.

  Hello Cirssy,

  Your computer stops on its own.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  If it is still at the age of one year I give HP a call so that everything is still under warranty.

  Here is a link to a phone number to call HP.

  I would like to know how everything goes.

  Nice day.

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

  I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

  Hello

  1. the updates you downloaded?

  2 a successful installation of updates?

   

  Follow these methods and check

   

  Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
  Renaming or removing the pending.xml file booting from the Windows Vista disc.
  a. Insert the installation disc.
  b. restart your computer.
  c.Press any key to load the disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
  d. choose your language settings, and then click Next.
  e. in the System Recovery Options menu, click command prompt
  f. at a command prompt, type the following command below and press ENTER
  CD C:\windows\winsxs

  g. now, type ren pending.xml pending.old , and then press ENTER.
  Restart the computer and check.
   
   
  Method 2:  Once you are able to boot to the desktop, follow this method.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
   
   
  Thank you

• Computer stops during startup, Vista crcdisk.sys

  When I try to turn on my computer, I get a screen saying that Windows is not shut down properly. It gives me the opportunity to launch startup repair or start windows normally. With option, I get the black screen with the green bar for maybe 3-4 seconds before my computer turn off suddenly. I tried to hit f8 and have advanced boot options. With one of the security modes selected, I see loading files. The last file I see is crcdisk.sys and then the computer shuts down. I thought maybe it was a start power supply problem but by replacing the power supply did not solve the problem.  I tried to boot from the disc of the operating system that came with the computer, after "loading windows files" it does the same thing and stop at the black screen with the green bar. I downloaded a Vista recovery disk and tried to boot from that, same result.

  Ideas/suggestions on how to solve this problem would be appreciated.

  Looks like you have a hardware problem - most likely with your hard drive, but perhaps also something else.  I recommend that take you to a repair shop of computer with a good reputation for the service (NOT Geek Squad or any company like that).  Or you can send it to the manufacturer for service (compare costs, benefits, schedule, availability of parts, effort, reliability, and anything else feel you is important and make a decision).  If you can, try to back up your data first, as it is likely the drive will be wiped clean in the process.

  You can use Knoppixhttp://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (made on a different computer).  Boot this disk.  This should give you enough access to the system (if you do not have any other means) to backup your important data.  If this does not work, try to remove the hard drive and it enslavement to another computer and use this computer to access the drive and back up the data.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error loading winefc32.rom

  Hi friends

  I get an error msg when I connect to my pc?

  He said: error loading winefc34.rom I have no idea why this keeps any help please guys

  http://www.google.com.au/search?hl=en&source=HP&q=winefc32.ROM&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  Read the above lack of information on this topic at Google.

  Which would indicate that it might be malware.

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• inactive: error loading winbch32.rom

  every time when I start my laptop I get this error loading winbch32.rom after starting, I tried to find in the center of solutions for Microsoft vista but chess pleaes help me out of this problem, I hope you guys will help me thanks in advance have a nice day

  http://www.google.com.au/search?hl=en&source=HP&q=winbch32.ROM&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  Looks like that is / it was Malware. read the above.

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• error message saying "error loading wingsw32.rom the specific module was not found" whenever I boot my system

  wingsw32. ROM

  I get an error saying "error loading wingsw32.rom the specific module is not found" whenever I boot my system.

  Can someone help me in this.

  Thanks in advance!

  ·                                You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Error loading winjce32.rom

  I get an error when I restart my laptop IE.

  Error loading winjce32.rom

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Need a way to stop loading while loading a page, some are too slow, used to have this option?

  I just upgraded to the latest version of Firefox and noticed that there doesn't seem to be a way to stop loading completely while he is in the process of loading a page. Older versions had this feature and I use it often. One site in particular that I deal with on a daily basis, has tons of advertising which can sometimes take forever to load, while making my every move unnecessary. I found that by stopping the entered page EQUIPPED does not affect the parts of the page that I had to do what I had to do, in other words, all the information that I needed the list of my articles were there long before all responsible ads. So rather than wait a minute or two, while the ads all charges, I could click on 'stop' and then do my work. Maybe I'm just missing where this feature is? I should mention that I have really problems to this place but I use it every day. For any help or suggestion would be greatly appreciated. Thank you for your time:
  Denny

  I suggest an anti-ad like Adblock Edge addon

• Websites stop loading until I move the mouse.

  Websites stop loading unless I move the mouse. I tried to reset Firefox and uninstalled and reinstalled it. Gel still without moving the mouse.

  Hello emh12az, several other affected users have reported that it was a problem caused by malicious software on their pc.
  Please run a scan of your system with adwcleaner and the free version of malwarebytes.

  Fix Firefox problems caused by malicious software