computer stops too fast down if it is not used. must reboot to get internet to work?

Similar Questions

• Button / stop and the down volume button does not

  Hello, I got a G4 bike for less than a month and the power on button and the low volume button are a reagent.

  Hello

  I have the same problem. It certainly isn't a hardware problem, because after holding the power button for about 30 seconds, I was able to reset my phone.
  It works well after the restart.

  Best regards
  Diana

• Cannot access BIOS after closing down and also can not use change PC settings either.

  Hello

  I am wanting to access BIOS so I can restart the computer with windows 7, since I had nothing else problems with windows 8.1. It messed up my registry and now I can't use one of the windows in all applications, just the office part. (Computer worked fine with windows 8 before that I "upgraded", if you can call it.) So either no access to change PC settings and the BIOS keys do not work when you press during loading. Help, please

  Hello

  Try the following.

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• BEFVP41 internet connection stops at least once a day (do not use DSL)

  Recently started using this router and I noticed that at least once a day the internet connection is dropped and will not bounce back on until I update any random setting on the router. It's getting very annoying frickin since I work from home. I have a static IP via fiber cable directly to the House so no modem is in the way.

  I have the Firmware update but apparently according to someone on this page:

  http://www.Newegg.com/product/ProductReview.aspx?item=N82E16833124003

  "It stopped working completely after a month. After a conversationwith a gentleman very polite to Linksys, we determined that this router comes with (v1.02.00) version thefirmware means forwireless routers! Latest firmware for the router is actually v1.01.04. »

  "Much work most of the time. After using it about 2 weeks, he starteddropping the Internet and required a reboot in order toreconnect to the network. After using it about 3 months, it would be notrespond to a ping or a connection attempt, but continued to functionnormally otherwise. Currently, it can not be configured withoutrebooting and he gives a ping answer about 10% of the time. »

  Same thing is happening to me so I wonder if I have a defective router or if it is that Linksys has forgotten something with the firmware. I have the last 1.02.00 on router v2.1.

  Anyone know anything on this subject?

  Try to reflash the firmware once more.

• Why my computer powerdown approximately every hour as it is not used to do.

  My laptop used to powerdown after use rather than on all the hours.  now it works all the time.  What did I do to cause this.

  Hi Gwen,

  Check out the following and see if it helps

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

• Computer stops in normal mode. Do not use the safe mode, because I have no sound, or security out there, please help?

  Computer stops in normal mode quickly. Do not use in safe mode, because I have no sound or security, please help?

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer shuts down when not used how can I stop this?

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

  ==========================================
  See the following articles:

  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Disable on Windows 7 or Vista power management
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

  Management of power (Windows 7 and Vista) Options
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00825528

• iPhone battery drains too fast since the last update! Please fix this

  MY battery life drains too fast since the last update. Use to be able to use my phone all day and have more than 50% at the end of day. Now I can't do half a day yet. And that's just since the last update

  Hello JasonV!

  I definitely want to get the most out of the battery of my iPhone, considering how much I use and depend on.  We can certainly check a few settings.

  First of all, check out this article to see if there are any apps or processes that use more battery than expected: on the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  Then see that all of your settings are configured as this guide recommends: Batteries - maximize Performance - Apple

  Once those who are defined, give it a try with the settings and let us know which applications use the most power and the percentage.

  See you soon!

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MsMpEng.exe running non-stop using 100% CPU and slow my computer down makes it difficult to use

  MsMp Eng.exe running non stop using 100% of cpu and slow my computer down makes it difficult to use, I just need a way to disable this program

  Hello Ian,

  Have you tried the Task Manager to end? Right-click on the taskbar and select Start Task Manager. Locate the application and click on end task (at the bottom of the page). I wonder if it's a piece of malware running, or even a virus. If it will not be closed, or starts just backup again, consider using these scanners:

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  ESET Online Scanner: http://www.eset.com/us/online-scanner/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• iPod touch 5th gen battery drains MUCH too fast, even when completely stopped

  Hello. I had problems with the battery on my iPod touch. It irrigates incredibly fast. Today, I lost 5% of research something upward on Safari... I have not used my iPod even another hour for a full charge, and it is already less than 20%. I also found it sometimes jumps the large percentage (like 10%) and die 12%... Someone at - it an any fix for this? I can't be replaced for free since I since Christmas of 2013, the guarantee would be so dead... Help me here please, I can provide more information if necessary.

  % battery isn't accurate on an iPod. You'll see major fluctuations to battery %.

  The test is to charge for at least 6 your and play a video, 4-5 hours seems to be normal for a battery in good condition. Your battery may only be exhausting.

• IPhoto crashing too fast to record.

  Hello. Ive done a search and I've seen a few questions on this topic, but I have another question to add. So, my iPhoto remains open for about 3 to 5 seconds and then stops. This started happening recently, but I haven't added new pictures in a while, so if there is a corrupt file, I don't know how what happens if this problem started a while after I added my last picture?

  I have my pictures on a disc external hard as well, I'd like save those in iphoto on my counter top, but iPhoto closes too fast! Any suggestions?

  Also, this could be caused to save my phone? IPhoto opens when my phone is plugged, but I didn't save all photos recently. Thank you, Owen

  EDIT: Im on a 2011 mac mini with Mountain Lion.

  In addition, iPhoto, I opened my account of girls and not plant the iPhoto application.

  Disable your internet connection and try to launch iphoto while you are offline.

  If iPhoto then works again, you experience the problem that iPhoto crashes, because he can no longer access the servers of Google for maps and location data.  Apple has not renewed the contract with Google.

  See this tip for the user:

  iPhoto 9.4 crashing during playback of the scene

  There are several ways to deal with this:

  • Upgrading to iPhoto if possible 9.6.1.  iPhoto 9.5.1 and newer versions use different map servers.
  • Working offline. If powering down of the network is preventing accidents, a confirm that the accidents are caused by the functionality of the site.
  • Deleting the html of the iPhoto application files, running the java code that attempts to access the servers of Google as suggested by Huxly647':

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

  If you want to make the places feature working again, take a look at the post of cotton-x:

  Cotton-x user posted a clever to patch the iPhoto application solution, so that it uses a private key to access Google's servers. The same fix works well for Aperture 3.4.5, and probably earlier versions of opening as well.  See this link if you want to try it.

  Re: iPhoto 11 - problems with Photo locations

  I've tested this in Aperture 3.4.5 and could view maps of land once again, who have much more detail than the new cards in the latest version 3.6 of Aperture.

  

• During the execution of that Microsoft Security Essentials scan, computer stops at this own topic.

  Original title: computer stops on its own

  Companions of the IO,

  I have a notebook Acer Aspire with Windows 7 Home Premium. When I run the full scan of MSE, the computer shuts down on its own after a while. It's actually like a stop forced down, even if the battery is almost full and the laptop is plugged. When I turn it on it shows that ' Windows did not shut down correctly...» ».

  Any ideas what type of problem could be?

  Thanks for the complete information. The problem is resolved. There is nothing with the computer. The voltage of electricity was actually too high and the power supply just blocked power supply check to protect the computer to burn.

• A bug? Reading Photoshop Action is too fast, after upgrade CS5 - CS6! My action does not work

  On a PC

  I upgraded to CS5 in CS6 (cloud) over the long weekend and I'm now facing a massive headache. Process actions that I use extensively for my work are all foxed by the simple problem reading action going too fast for the script on two documents to stand. I've tried everything I can think of, but the only thing that allows the action to progress substantially (as in previous versions of the software) is the step by step playback mode. It's too slow to use on an ongoing basis.

  The problem is caused by the following sequence

  Save as a document (on the desktop)

  Opened as a document - open that Camera Raw - after settings open in Photoshop

  Select all

  Copy

  Closed - registration No.

  (PS automatically selects previous document)

  +++ Paste +++ command ERROR paste is not currently available

  This is where Photoshop choose the previous/underlying document before applying the Paste command. Since the upgrade its been trying to paste the Clipboard in the fraction of a second after the closure and by selecting the previous document and have reported no documents available to all. Slow down or if stop playback with step by step or stop and continue works around the problem but the workflow causes to slow down considerably.

  Is it possible to script a break during this time crucial one? Or is there a setting preferably I forgot it's breakage behaviour?

  This thread solved my problem http://forums.adobe.com/message/4423788#4423788

  This is a bug. The work around is to record a change in the speed of reading before and after the paste.

  Adobe would you want to fix this problem please?

  While you are, you would also look at "less than 50% of the pixels are selected," it would be really great if we could cancel this warning when batch processing of images and using measures.