EA4500 and heavy loading performance wireless

Similar Questions

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• getting dropped under heavy load of iSCSI LUNS

  Hello

  
  I found a few forums on this... but not a response yet.

  I have a Hp Lefthand 4300 cluster for the storage, connected to 2 x DL360 G7 ESXi 4.1 via iSCSI (Hp edition) guests and a Procurve gigabit switch dedicated for iSCSI. Whenever I run a backup down the LUN for a few seconds (usually 5, however it was as much a minute).

  Things, I tried...

  Updated software from the left to the latest version

  Updated all the HP firmware on the hosts

  Update to the latest drivers HP Boradcom on ESXi hosts

  Changed the timeout 1400 (esxcfg-advcfg - s VMFS3/14000/HBTokenTimeout)

  These servers come into production in the new year... Please please can someone help me solve this problem?

  I call open with Vmware and HP, nor was particually useful, Vmware has suggested I called HP and updated card drivers NETWORK, HP simply said that it was a network problem and closed the call... Thank you!

  I intalled surveillance under tension and can not see all ports dropped etc. All the equipment is new and the LAN cables are Cat6.

  Don't really know where to go from here!

  The exact error I get is...

  Lost access to the volume (4cf7b1ac-5fdcc218-5c2e-1cc1dee48e30)
  S1 - SP1OS) because of connectivity issues. Recovery attempt is in
  progress and results will be announced soon.
  Info
  2010-12-27 01:06:06
  192.168.32.2

  Please help me!

  Kind regards

  Kris

  We have recently changed some hosts who also had problems on a heavy load with iscsi San connections. We used hwiscsi (TOE), Broadcom adapters (was a recommendation from different vendors) before and this has recently changed to swiscsi (with Jumbo).

  No. dropped / resets on connections over this host. And a much faster flow of vm (tested with IOmeter).

  We also saw a much beter performance (throughput) on hosts with NIC configured to swiscsi on comparisation of hosts with an iSCSI HBAS (Qlogic 4062).

  We use VMware ESXi 4.1 (latest patches).

  Problems with broadcom TOE (hwiscsi) on HP DL360G6 also on Dell M610 blades.

  SAN: EqualLogic PS5000 PS6000, PS5500, PS6500,

  Switches: Juniper weer Jumbo Frames and flow control.

  So I recommend you also use swiscsi on these broadcom adapters.

  If you are looking for broadcom issues with vmware, find others with similar experiences.

• P620 turns off randomly during heavy load

  Hello!
  
  I've had my computer since 2007/2008 now and I have came across a problem of dust. I cleaned it and it worked fine again. After I had finished, I moved my computer one meter or more. A day later when I curled the computer, everything was fine, I had a game running in the background. But when I came back, my computer has been cut, so I thought that my roommate turns off the computer. Didin't there do! Later when I started again, I came to the Startup Repair. I curled the computer, but when I came back, you guessed it: it was closed. I asked my roommate again and there still didin't make. Later, I used a live cd of Ubuntu to the backup on my hard drive computer internet. When he was done, I started the process of re - install my computer. Until I clicked on the button reinstall, I tried one last time. It worked! So he came with a "computer didin't work properly' or something. The resan was BlueScreen. So I tried to open the minidump file, but my programming program expired, so I couldn't open it. LARGE. Later, my computer said that it had no internet and icons started disppearing. It seemed that the hard drive has begun to be unloaded. I clicked on the icon and BOOM internet! My computer is turned off. No reset. Right next door. I feel this only when it is under heavy load. And I knew just the effect "unload" 2 times. Other times, the screen goes black and the power light is still on for like 5 seconds and then shut the computer completely, it also occurs on the effect "unload"!
  
  Computer:
  Model: p6320sc
  If you want more, ask me.
  
  Thank you for your time.

  Hello GAsplund

  I'm sorry to hear your computer is overheating, but I think I can help you. I provide you with a link to a paper support HP here "reduce heat inside the PC to prevent overheating" to help reduce the heat so that your computer stays on.

  I hope this helps solve your problem of overheating and here to thank you for the post on the HP Forums have a great day!

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

  Hello

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Best practices MMO. Download music and heavy files on disk hard users?

  Best practices MMO. Download music and heavy files on disk hard users?

  I just downloaded a Hello Kitty MMO application to search (for my kids of course).

  I am developing my application of teaching of English with LOADS of classical music, mp3 and heavy bottom BGS phrases. The best idea would be client to download them to their drive hard is to say that I wouldn't need their flow and therefore save a fresh wealth of bandwidth from my ISP?

  See you soon

  You will need test and see what works best for you... as I said, the files are cached and used in the cache whenever possible. However, there is a limit to the size of the cache, and if your files are huge then yes there is probably more sense to download. Or get a better reception where bandwidth is not a problem...

• I can load the wireless keyboard using the IPhone charger form?

  I can load the wireless keyboard using my IPhone charger?

  Strictly speaking, they are not quite universal.  It varies, but what happened to the one that came with the keyboard?

  Take a look at this document from Apple.

  https://support.Apple.com/en-GB/HT201700

• Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?

  Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?

  I have all the latest upgrades.

  My operating system is El Capitan 10.11.3

  I have Adobe CC 2015 Illustrator, InDesign and Photoshop. None of them will launch, open or close.

  My mac is so slooooowwww. I'm sitting for 3 days I look at a spinning wheel. Can anyone help? My roof looks inviting at the moment!

  running CC2015 10.11 and it is compatible with El Capitan, so the question is what else is on your system that may be the cause of the problem:

  Please run a report of etrececk and post the results here

  http://etrecheck.com/#about

  This will give us one overview of what else is running on your system

  If you are currently using any anti-virus Mac you must uninstall it immediately from your system. See web developers page for instructions

  If you currently use one "own my ' or 'custodian' of products you must remove them from your system immediately.

  Restart and reset the PRAM

  How to reset the NVRAM on your Mac - Apple Support

  and in the meantime if you need to use CC I suggest you try the following

  start in safe mode and run CC

  Try safe mode if your Mac does not end commissioning - Apple Support

  or Create a NEW account administration and the boot into that and run CC

  and see if either of these procedures to help.

  and if you must go on your roof with a lounge chair, some Bob Marley albums, not a note.

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• I opened a suspicious link and it kept is refreshing and nothing loaded, I'm little worried about being hacked, what I can do to fix things?

  Hello

  I opened a suspicious link and it kept is refreshing and nothing loaded, I'm little worried about being hacked, what I can do to fix things?

  I'm new to iphones I hope you could help me

  Thank you.

  There is no virus known for a non jailbroken iphone.

  Conclusion of the app, you are in double tap home button and close the app.

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• Lenovo S90 restart - U during loading and after loading

  Hi all

  I had loaded my Lenovo S90 - U of the overnight yesterday while l was that l had realized that the phone was asleep reboot several times during loading and after loading at 99%. My phone is not switched off since l had the phone and my wifi is all the time. He had to kind of wake me up my normal alarm of time, what is the problem here? Is there a solution to this issue?

  Of

  Mr.Koh.

  Please use included original Lenovo charger and cable to recharge the Lenovo S90 you and not use your own charger & cable to load goal. This solves reboot during loading and after loading for me.

• How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  I have a virtual network adapter that is created with Broadcom.

  This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

  This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

  Someone has an idea?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel