Computer stops with an error message that he was arrested for environmental safety and of him having served

Similar Questions

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• everytime I turn on my laptop, now I get bombarded with the error message that says...

  Hi, whenever I turn on my laptop, I get now bombarded with the error message that says...  The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc?  Any help on what caused cela or how to solve this problem would be highly appreciated.  Thank you

  Try to clean the temporary Internet files...

• My Kodak esp 9250 comes back with an error message that says: cannot find the edges of the printer paper?

  I am trying to print a long document and I get an error message that says that the edge of the printer paper is not found.  It will print one page, then print 3 blank pages then stop and display the error message.  I tried to put in different papers and alignment, but it still does not work.

  Hello

  Thank you for posting. From your problem description, I understand that you are unable to print to help you cannot long pages of printing with Kodak esp 9250 receive message: could not find the edges of the printer paper. If I'm wrong, please let me know.

  This happens with all applications that you print?

  Check this link for more information on the document the size that your printer:

  http://store.kodak.com/store/ekconsus/en_US/PD/ThemeID.3925700/ESP_9250_All-in-One_Printer/ProductID.211201600

  I also suggest you download install the latest drivers for your printer and check if it works very well.
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9hbnN3ZXJzL2xpc3QvcC81LDYyLDEwMjkvYy84OTAvb3JpZ19pbnRmL2tvZGFrX2IyY19lbgis

  To learn more about this, I suggest you to contact the Kodak Support.

• Satellite L300D - recovery disk stops with an error message

  Hello

  I don't read a lot of the other post, but foung no response...

  My problem:
  I bought a L300D Vista 1Y there are no included recovery disks, so I made the recovery disc. Now, we wanted to reinstall Vista, so I tried the recovery disk, but after 15 minutes, it failed with an error message:

  After successfully in 3 partitions of partitioning and formatting them the ImageX tool starts to extract VISTA

  After about 57% C:eindows\winsxs\x86_microsoft-windows-ehome-ehcird_31...35.6.0.6000.16663_...\ehcir.ird [removeExtract ToFileByStruct WIMcopyFileEx failed]

  Retry...
  [error 1117]

  What happenes about 5 times with similar messages (but other numbers), til message
  The request could not be performed because of an i/o error

  ERROR: ImageX could not to VISTA Lawrence drive HARD C: 2 V: HDD

  Press a key...

  Aftre reading the threads, I ordered an official recovery (35 Euro!) since the Office of service Toshiba disc, but I got the same errors and messages...

  Any ideas what I should do now?

  Thank you!!

  PS I never had these problems with my other laptops...

  Hello

  My friend who s a long story.

  It's not easy to say what the reason is for this, but to me it sounds like that there is something wrong with the HARD drive. In your case I would format the HARD drive before launching the recovery disc. You can do this with a Microsoft disk to format the whole HARD drive. After that try the recovery disk again.

  If it doesn't work, you should check the HARD drive with a special HARD drive diagnostic tool like Drive Fitness Test. use Google to find it, it s freeware and takes only a few minutes.

  Welcome them

• How can I repair my windows installer, continues to come up with an error message that windows installer is not installed properly

  what I tried to do is to install the latest version of windows messanger (msn) ive, but im not able to make my windows installer comes back with an error message saying that the windows installer is not installed properly, please some help this starting to do my head in

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• Explorer stops with the error message

  While in Explorer thumbnail view lookig to a folder containing .avi and .jpg files explore suddenly freezes and comes up with an error message:

  Error signature is:

  ModVer: 2.9.0.0 Offset: 00002847 >

  When I click in the window of error, evrything disappears from the screen except the wallpaper, then after awhile evrything is back (except explorer)

  Maybe this:

  http://support.Microsoft.com/kb/822430

  writing in the new message: * e-mail address is removed from the privacy... *

  While in Explorer thumbnail view lookig to a folder containing .avi and .jpg files explore suddenly freezes and comes up with an error message:

  Error signature is:

  ModVer: 2.9.0.0 Offset: 00002847 >

  When I click in the window of error, evrything disappears from the screen except the wallpaper, then after awhile evrything is back (except explorer)

• Try to download inDesign CS5. When I click on download and serial line, I get an error message that there was an error recover the account. Tried several times, same problem.

  Try to download inDesign CS5. When I click on downloads and password I get an error message that says error during the file extraction.

  Try to download CS5 from this page instead: Download Adobe Creative Suite 5 products

• Windows keeps stops with the error message NOT driver IRQL less THAN or EQUAL

  Using Windows XP on the desktop. Have spent days trying to solve. Getting the message "new hardware installed" but I did not. Had recent power outages in the region. Also have Norton Security Suite, which recently has been giving me the popups that my RAM is too low, but I seem to have more than enough. Have done a few sessions with chat support online Norton with "recovery" distance as well, but the problem persists. Seems worse at night. I'd appreciate a few tips, like this is to destroy my PC.

  What is your computer brand and model?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  There are better alternatives freeware to Norton for a user running Windows XP.

• Computer displays an error message that says "system has encountered a problem and needs to close."

  Original title: "system has recovered from a seriuos problem."

  I get an error message whenever I restart the computer that says "the system has recovered from a seriuos problem" and also when I click on any .exe file to restart the computer.

  Please let me know the troubleshooting I must perform

  Thank you & best regards

  Sashidara.O

  Hello

  ·         You use Windows XP or Windows vista?

  ·         What anti-virus program do you use?

  ·         Did you the latest changes on the computer before the show?

  You have posted same question twice, one in the category Windows XP and in Windows Vista, if you are facing this problem in Windows XP, you can read this article:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

   

  The computer may automatically restart, or you may receive a "serious error" message or a stop error message in Windows Server 2003, Windows XP, or in Windows 2000

  http://support.Microsoft.com/kb/894278

  Follow these methods to solve the problem in Windows Vista:

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

  Also, try to perform the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 3:

  I would say as you try to perform the SFC (System File Checker) scan on your computer and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

• I need help with an error message that I started to get during the build.

  BB Storm on JDE 4.7.0

  I created a small class to allow me to easily create and play sounds. I have just run the following code to play a sound at any time (and I can play again too).

  IpAudioClip crash("libs.testother","/testother/crash.aac","audio/aac");
  ...
  if (crash.isSupported("audio/aac"))
  {
      crash.play();
  }
  ...
  

  Now, when I build, I get an error that I've never seen elsewhere as follows:

  libs. IpAudioClip: error! : lack of card from the pile to the label: 35
  Error while building project

  When I get this error on the web, I see preverify associated messages.

  First of all, can someone explain what the preverify step is all about? Also, why it is not managed by default in the JDE?

  What is causing this error? What should I do for the JDE to fix?

  According to me, that there is a box of pre-build in the properties of each file. Do I need to add a step preverify in there or something? How do we know when to do (if that's the solution)?

  Any info would be greatly appreciated.

  Thank you

  -Donald

  I solved it myself. JDE projects can sometimes get damaged. I had a project that was link a library even if he hasn't said to link this library. That's what was causing the error message. The solution was to delete the project and create a new one of the same name, overwriting the old and adding the same files as before and be careful not to add libraries was planned initially that he didn't need. Now all this very well built.

  This error message means there is a problem with a jar somewhere.

  THX

  D

• I get an error message that says: generic host for Win32 process has encountered a problem.

  How a Dungeon of this box of erroe to appear several times. He said-Generic Host process for Win32 has encountered a problem.

  Hi Swersky RB,

  1. don't you make changes before the show?
  2. when exactly you get the message?
  3 - is to start the system or download/install something?

  Please provide us with more information on the issue, so that we can better help you.

  Check if all the following articles will help you in fixing the issue.
  1 displays generic host process Error Message and a flashlight icon
  2 see Generic Host Process for Win32 Services has encountered a problem and needs to close.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• an error message that all players have left the game and I can't play chess

  plays for years without problem now get this message when you try to load an apponent.

  all players have left the game... try again?

  any ideas.

  Hello

  1 did you change on your computer before this problem?

  2. are you game chess titans or play chess in msn games?

  3. What is the exact error message?

  Answer with the information required for you help in this matter.

  Reference:

  Learn more about the games in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-about-Windows-games