Computer stuck in boot loop

Similar Questions

• Moved from HARD drive on computer newest and stuck in boot loop

  My old Dell computer died.  I moved my drive to a newer Dell computer. I'm stuck in a boot loop when I turn on.  I guess I need to repair or reinstall my windows XP to the new motherboard.  I upgraded from 95-98-XP over the years.  My XP upgrade disk is not bootable.  How to repair or reinstall Windows XP?  I do not think that re-formatting in FAT32, 95 installation, the upgrade to 98, and then upgrade to XP and NTFS formatting are a good answer.

  I have a XP Home edition boot disk (Dell) from the original HARD disk in the most recent computer.  I am able to use it and enter the recovery console, but don't know if I can do something here to repair the installation of XP Pro.

  Thank you

  If your Windows XP upgrade disk is not in Service Pack 3 (SP3), and then create a slipstreamed XP version which includes SP3 and then try to install it.

  Create a "Slipstreamed" of integrating XP SP3 version
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  How to do a clean install of Windows XP
  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  How to optimize your chances of Windows XP SP3 Setup successfully:
  http://www.PAGESTART.com/windowsxpsp3p3pg8.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• Compaq presario sr5518f: computer stuck on boot logo screen

  I just put in a 2nd inside the hard drive and now it gets stuck on boot logo screen I have disable reboot it 1 - 2 times before the beginning of the right way, any help would be great

  Hello @njchuck76,

  I understand that your desktop computer is stuck on boot logo screen after the installation of a secondary hard drive, and I'd be happy to help you in this case!

  To make sure that your system is booting of the operating system drive, I recommend that you follow the steps described in this document on the configuration of the Boot in the BIOS system order.

  If your computer is still not able to boot into Windows after making sure the boot order is appropriate, I suggest following this resource on the computer does not (Windows 8). This should help with running hardware diagnostics.

  If the problem persists after you complete all the steps listed above, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Aspire One stuck in boot loop eRecovery. Stuck reboot Acer "Pls wait the moment" scrn

  I need to stop the boot netbook in eRecovery.  I just want to start Windows.

  I can get into BIOS and boot from the XP software CD.

  I tried to repair and reinstall, but every restart remains stuck in the loop to start eRecovery - screen Win XP, then black start Acer eRecovery and Acer screen screen "Please wait a moment..." ", then restarts - back in the same loop - aqua color forever... I searched the Internet for solutions and found nothing.

  I just want to stop eRecovery and restart windows, the files are still there.

  You can try to use a program called PTEDIT.

  you need a floppy disk bootable with her BACK on.

  Start in PTEDIT and set the second partition bootable (change the second colum to 80) and the type 07

  Change the types of the first and the third partition to format BACK not as OC.

  I don't remember the exact type that must be configured so it can stop work to restore function.

• computer stuck in a loop with the update

  laptop has crashed and in safe mode, I uninstalled last update now it is stuck in a loop and cannot configure 3/3 before it crashes again.

  Hello

  I suggest you to th this method.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

• iPad mini 3 stuck in boot loop

  helllo, my ipad mini 3 is stuck in a loop of startup due to a bug in the iOS that seems to affect all ios devices 64-bit running ios 8 or later (I already reported the bug). Reset and restore from itunes does not solve the problem. I heard that the only way to fix it is to get a replacement or repair of apple device. My question is, my iPad warranty will cover the repair or replacement? It's an iPad Mini 3 running iOS 9.2.1 thanks

  Let me guess you sett the Date 1.1.1970 finde yes same problem here

• Satellite A50 stuck in boot loop after restore

  Hi, I tried to reformatt and restore my old A50, followed the instructions on the recovery disk only when it restarted it gets stuck in a loop, loading windows XP and then restart. When I start it in safe mode it says Setup failed to install and did the same thing.

  I started with a windows XP installation disc as well and it does nothing.

  Help, please!

  Thank you very much

  Leo

  Wait a moment Leo.

  If I understand correctly you original installation of recovery (recovery DVD) results issue described image.
  Installation of operating system with original installation disk Microsoft WXP ends with the same result.

  Can you confirm this?

• U410 stuck in boot loop

  Greetings everyone,

  Recently I bought a u410 and it worked great for a few weeks, but this morning instead of waking from hibernation as usual, it seems to be stuck in a loop to display the lenovo logo then a white screen with a few seconds on each. It worked continuously for hours while I try to run down the battery in an attempt to reset. I have no bios access during the loop, and it does not start on a usb media. I am now, I wondered what I would do because he has already given migrated my old machine and that you not exactly want to start over. Is there something that can be done otherwise than returning or sending to lenovo support?

  No white dots, has not even come to that. I solved it earlier today and it turns out it was a corrupted hibernation file which was causing the problem. Who removed and all was good. Thanks for the reply if it could be useful in the future for myself or others fall on this thresd.

• Tablet stuck in boot loop

  I have a Dell 10 5055 place tablet.

  I had windows 10 on it since I have the Tablet and never had any problems until today. A couple of months I have reset back there and it works beautifully. I have reset this morning only to find it in a boot loop where it shows the dell logo and then flashes an error and restarts. The error is "reboot system to make adjustments tpm2 indeed"

  I tried to plug and unplug. I even tried to press the volume up, which highlights the F12 boot menu, it displays the same error and restarts. I tried to go into the bios with the same question. I tried to hold the volume up and volume down to go into recovery mode and it displays a loading bar. After a few seconds it flashes the error and restarts. Not sure how he has adjusted very well a few months until this morning when my warranty has expired recently. I tried to contact support, and they said it would be $ 150 to get which is sent to them that they can fix. For $130, I can buy a used one online. If I knew I would get this issue I would not have reset. Don't know why and what could be the cause.

  Note this thread for anyone watching one.

  The poster has another thread on this problem, on the plateau Mobile Devices, which is a better place for discussion rather than here on the sound card from the laptop.

• Y410P stuck in boot loop 'prepare auto repair.

  Hello

  Unfortunately, I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "prepare auto repair. After a few moments, it will say "Diagnose your PC" and then "repair disk errors. It could take more than an hour to finish. "Edit: then after a few seconds, it restarts and everything happens again.

  As you can imagine I am very satisfied with this and I have no idea what may have caused it. I am currently studying in Belgium so no help here I can get will be greatly appreciated.

  Thanks in advance!

  
  

• Pravilion HP P7-1235: WIN10 stuck in boot loop

  I started with Win7 has accepted the update free for Win10 and it worked great for awhile, then he said, one day I got i/o device error and continued to work... maybe two days later a blue screen appeared 'Death of critical process' and he did it... whenever I turn on PC It goes into auto repair and diagnosis tried any and all options without success... I can enter in CMD prompt... I tried sfc/scannow will verify, but cannot perform the function... tried to dism.exe / online / cleanup-image /restorehealth / message... DISM does not support the windows PE maintenance option with / online.

  I turned computer press ESC several times and began checking... the memory test "after" test drive... Control smart "success"... Long dSt "failed"... Failure ID 9G8KMW - 00089 K-WPWX1G - 61A 303 product ID H2M55AA #ABC Hard Disk 1... He's a 1.0 TB Hitachi HD5721010CLA630 SATAO

  Can someone tell me if this means that my hard drive is pooched... When I went to the steps on the document of HP it says contact support for more information... tab of course appreciate the help!

  Hi@lampmrr,

  Welcome to the Forums of HP's Support. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Questions about the PC startup is this right?

  Thank you for sharing the details of the problem. I want to help you.

  The error code that you have shared is a definitive failure of hard drive and must be replaced.

  You can reach our hotline for any warranty related support options. Use the link below to get in touch with them.

  http://support.HP.com/us-en/contact-HP

  I hope this helps. Let me know to learn more.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP

  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Computer stuck in the loop of update configuration

  original title: after an update of windows the computer configures 3 updates then stops, restarts, and then did exactly the same thing again and again and again.

  Can't get windows log in screen as it sstays in this configuration and stop cycle

  How do I get out of this cycle?

  Hi MargiRobinson,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Satellite L50 - A - 1 6: "boot loop" at power on

  Hello world.

  I have a Satellite L50 - A - 1 6 (just bought). I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward).
  After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop here is summerized: + logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC. +

  The only possible operations are:
  -to power the laptop off (by turn off by pressing the key)
  -to access Bios (by pressing the F2 key)
  but later, the laptop comes back still in boot loop.

  I also tried to set up an order of boot device for the use of tools like "live recovery cd" or similar (also USB)... but nothing... He always goes in the city "boot loop".

  Any suggestion to have the correct start of my laptop?

  Thanks in advance.

  Hello

  >. I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  This does not surprise me. You have changed the partition table, and therefore the partitions of HARD drive will be more found.

  > So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward). After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop is summerized here: logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC.

  This does not work for the reason that I mentioned above. The disk HARD recovery isn't possible now!

  I recommend you to use stop force switch:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn