IN my pc, I have 2 GB ram.but it shows 1GB.why?

Similar Questions

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• My Mac Pro is coming with 16 GB of Ram, but it shows 12 GB.

  Hi all!

  I just went from ElCapitane to Sierra and I find that my computer does not appear all the ram it has. Does someone can tell how I can solve this problem?

  Thank you!

  Hello Olegcotuna,

  Thank you for using communities Support from Apple. I know have a problem with the memory on your Mac Pro is not what you expect. Based on what you said, it seems that you can be affected by your Mac does not have the right amount of memory you have installed. I would like to start by running the built in Apple Hardware Test or diagnosis Apple, according to what year comes from your Mac. This test can give more information about what is causing your problem.

  Using Apple Hardware Test
  Using Diagnostics from Apple

  See you soon!

• HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

  my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

  Hi @minxfiles ,

  Welcome to the HP Forums!

  This is a good place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have 6 GB of ram and it is only readable 929 reading.

  Just to be sure you're correct DDR3 ram installation?

  Installing the chips of RAM, they must be of the type suitable and properly matched.  You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

  If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

  Good luck!

• Have used Hotmail sweep - but account seems stuck - why?

  Used raids of Hotmail - but now I get no messages and account appears to be blocked - why?

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Live Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=1

• 64 bit computer 8 GB of RAM but windows shows only usable 3.25

  OK, I got the original 6GB (3x2gb) RAM (1600), installed on a MSI 880GM-E43 motherboard and a Phenom II X 4 (I think either 3.6 or 4.0 Ghz) and windows all read well. I buy a new motherboard Gigabyte 970 a - UD3 and another key to 2 GB RAM and install. Now when I go to windows, it says properties

  "Memory (live RAM) installed: 8.00 GB (3.25 GB usable). So firstly that I went into the BIOS to check if it shows the correct information and he did. Then I changed my CPU speed clocked 3.4 to 4.0 Ghz. I loaded windows and he always says the same thing "memory (RAM) installed: 8.00 (3.25 GB usable)" and now, the processor has not changed either "processor: AMD Athlon (TM) II X 4 965 3.40 GHz processor". " I even reinstalled the new drivers and it still shows the same info.
  CAN ANYONE HELP!
  Specifications of the computer:
  Windows 7 Home Premium - 64-bit
  AMD Phenom II X 4 - 4.0GHz
  Kingston HyperX Blu 8 GB (4x2Go)
  Gigabyte a 970 - UD3
  VisionTek Radeon HD 5750

  Strangely, even if the memory is entered correctly, it stil reports way less. Don't know why but files seems to correct the problem...

  No doubt you are overclocking... 'Properties' always reports the chip actually, not the speed it is running at a time. Was it to do, it is time when your chip would show at 800 mhz... waaaaaaaaaaaaaaaaaaaah... :-)

• I have 16 GB of RAM, but said 2.98 GB usable

  I have a workstation HP Elitebook 8560w running windows 7 Professional 32-bit. It came with 16 GB of RAM, but it shows 2.98 GB usable, but when running windows 7 Professional 64-bit all 16GB works. Can someone please?

  Thank you

  You must migrate to 64-bit Windows 7 to use all of the RAM.

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.

• Control Panel shows that 4 GB of RAM, but product specs say I should have 8GB

  My HP Pavilion Elite HPE-250f desktop computer is supposed to get 8 GB of the RAM factory installed, but the control panel shows only 4 GB. When I run the diagnostic with the Support Assistant software it says that everything is working well, but also shows that 4 GB of RAM. I've had the computer for several months and the warranty just expired. In the past, I noticed it says 4 GB and thought that I should have bought a computer with only 4 GB, but it has always seemed strange to me. I looked towards the top of the record online and it says the HPE-250f has of 8 GB, and it also says 8 GB on the box in which it came. I didn't do any changes to the computer and never open the Cabinet. I hesitate to open the cupboard, but do not feel I should have to pay a lot of money to understand this.

  HP Pavilion Elite HPE-250f

  Windows 7 Home Premium 64-bit

  It took me a few tries - and months of frustration - but I solved the problem by carefully removing the memory cards, clean gently slots and cards and firmly the resettlement of the cards. It's been several months now, but the memory has been resolved. I had serious problems, as it is stated in this thread, with a catastrophic failure of the graphics card and HARD disk failure. I read on several posts that this particular graphics card was problematic, so I've upgraded to a Radeon HD 7700 series. I got the Core edition, which has 2 GB of memory defect to 1 GB. No problem since.

  In case of hard drive failure, it was a disaster! I replaced the HARD drive of 1 TB with a 512 GB SSD, but it kept the infection by a rootkit that I couldn't clean up. I tried cleaners virus and rootkit of several software companies with no joy. Not even the first products like Kaspersky, McAfee, Sophos, BitDefender and other companies. I reformatted the drive several times, but the hook came back in return. Finally, I brought the computer to a friend who is a computer SCIENCE professional. The rootkit probably lies in the commercial cloning software (Acronis True Image HD) that came with the SSD, it said. We loaded the operating system without using Acronis and have not had any problems since! I've also installed a WD Blue 1 TB HDD and rebuilt directories so that all libraries (Documents, photos, videos, etc.) are on the disk hard while the system is installed on the solid state drive. The upgrades were worth every penny! Now, my desktop HP 5 years computer works very well and the performance is very good even by today's standards. Boot times are much faster, too.

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• Satellite A200 PSAFCA-01H00J upgraded to 4 GB of RAM but can see only 3 GB

  Hello

  * UPGRADE RAM PROBLEMS *.

  I just upgraded my laptop from 2 GB to 4 GB of RAM, * but cannot access the 3 GB *.
  I checked all the documents, and he indicates that the laptop should be expandable to 4 GB of RAM.

  Oddly enough, the site of [mytoshiba.com.au | http://mytoshiba.com.au] does not list my exact model under "abandoned" (as if it never existed!). Although there are a number of similar models according to [http://www.mytoshiba.com.au/web/resource/pdf/discontinued-models/notebooks/satellite/satellite_a200_psafca-01k00j.pdf]

  _OTHER WINDOWS7 64 BIT PROBLEMS_

  I also added a larger HARD drive (the original HARD drive wasn't @ ~ 19 months-) as well as a fresh install of Win7 Ultimate (64-bit).

  I have the Toshiba site and updated 64-bit drivers as much as possible, including the BIOS to Mw10M520.ROM using winphlash64 downloaded on the net, the included winphlash (32 bit) of toshiba did not work as I have already installed Win7 (64).

  Incidentally, I always have problems with "Toshiba Password Utility monitoring" and the software "Driver Bluetooth software" provided by Toshiba to [http://www.mytoshiba.com.au/support/notebooks/satellite/a200/psafca-01h00j/download] - in the absence of "* Win7 64 * ' drivers I used the ' * Vista 64 *" drivers. Is this a problem?

  According to my system info:
  My Chipset is * chipsets Intel® 945 Express Chipset Family *.
  My CPU is * Intel(R) Core (TM) 2 CPU T7400 @ 2.16 GHz 2.16Ghz*
  Installed memory is * 4.00 GB (3.00 GB usable) *.
  System type is * 64-bit OS *.

  What Miss me here people? Help please :|

  Hi mate

  Please check this page of specification Intel chipsets Intel® 945 Express Chipset Support function
  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  + _1.4.2 system memory account Support_
  + Takes in charge single-channel DDR2 SDRAM only.
  + Memory maximum support 2 GB +.
  + Channel memory Topologies taken in charge: +.
  + Single channel with 1 single SO-DIMM (up to 1 GB) +.
  + Single channel with 1 SO-DIMM (up to 1 GB) and down (up to 1 GB) of memory.
  + Support for DDR2 400 MHz and 533 MHz +.

  As you can see, the Chipset Mobile Intel 945 Express charge max 2 GB of RAM. This means that 4 GB of RAM would not be taken in charge and this is perhaps the reason why only 3 GB of RAM are visible

• Satellite P100-286 - upgrade to 4 GB of RAM but BIOS only reports 3 GB of RAM

  Hello, I would like to know if someone can help me...!

  I have a portable P100-286 Toshiba with the following specifications:

  Processor Intel Core 2 Duo processor T7200 - 2 x 2 GHz processor
  2 GB RAM (2 x 1048)
  NVIDIAÃ? GeForce Go 7900 (memory: 512 MB)
  Vista Home Premium 32-bit

  Full specifications here:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & highlightOption = 63188 & com decided .new = Yes .broadvision & PRODUCT_ID = 125204 #0

  According to this specification, the laptop can handle up to 4 GB of RAM:

  "Memory system: standard: 2 048 (1, 024 + 1, 024) MB, maximum of extension: 4 096 Mo, technology: DDR2 (533 MHz) RAM.

  I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem.

  However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.

  Can someone give me some ideas as to what I can do to the BIOS then it recognizes all the 4 GB of RAM?

  Thank you very much!

  Post edited by: [email protected]_UK

  > I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem

  You're not 100% good. The 32-bit Windows OS cannot use the entire 4 GB due to the limitation of the 32-bit operating system. After the installation of Vista SP1 will display full 4GB but it will still use only 3 GB.
  To use all of the 4 GB, different components like CPU, BIOS, OS and chipset must support this. If one of these doesn't support 4GB while the laptop components will use only 3 GB.

  > However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.
  Update the BIOS

  People are right. The update of the BIOS must help to recognize the 4 GB in the BIOS.
  But it s also good that the update of the BIOS is risky.
  If you want to use a bad BIOS or bad procedure to update the BIOS that can damage the ROM. module

  Good bye

• Tecra 9100 - installed like 512 MB RAM, but it slowed down my computer!

  After much fumbling around trying to install my new 512 MB of RAM, I turned on my computer to find that it starts much more slowly. A message popped up saying 'Memory Module added' and my computer shows 768 MB is installed which is correct, because I already have 256 MB installed in Slot 1.

  So why on Earth is my computer even slower! I bought it to speed up the thing! My computer is slow to start, is less sensitive and much better with just the 256 MB of RAM installed.

  I think I might have damaged the RAM or the Slot 2 because at first, I inserted it incorrectly. They should have a video demo on how to install it because the manual didn't help me that much!

  The RAM is crucial and supports my cell phone because I ran tests to determine what RAM I need.

  Can someone help me please!

  Hello

  Well, it is possible that the new RAM is malfunctioning.

  But have you checked the speed of RAM? How much MhZ is the module supports?

  The Tecra 9100 supports PC2100 512 MB (PA3164U - 1 M 51) module and it runs at 266 MHz.
  If the new module supports a lower speed that the old second module will work also with lower speed.

  Moreover, I would not recommend using modules without name. The performance is bad. Kingston modules are much better.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6183&ft=m&St=3

• Satellite Pro A120 (PSAC1E) 4 GB of RAM but 3.3 GB recognized

  All,

  I upgraded my laptop memory 4 GB 2x2gb modules.
  However, it seems that the system recognizes only the total memory than 3318 MB!

  Although it is said that this model is able to extend memory 4 GB, it seems that this is not the case.

  Has anyone else he had a similar problem?
  I have run many tests on modules and fix them with 1 GB module and both works fine.
  This link for my laptop Toshiba: http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=123515&DISC _ MODEL = 1 & service = UK

  Thank you

  Kav69

  Yes, there are more people who have only 3.3 GB instead of 4 GB of RAM.
  Do you know why?

  Due to the limitation of the 32 bit OS!
  Have you heard that abut?

  Isn't it? Well, all operating systems are 32-bit can handle only 3.2 GB.
  Check the Microsoft page for more details!