computer tables

Similar Questions

• Use a computed table footer field elsewhere in the table

  I have a repeating table where the column total is done in a table leg. The name of the field is

  Form1. ICE_Page1.CostEstimate.Table1.FooterRow.Subtotal_Labor

  I need to use this value in a later in this table section (I just need to repeat the value in another cell). I used this on the exit event of the cell where I want the value to be repeated.

  Table1.FooterRow.Subtotal_Labor.RawValue

  = this.rawValue;

  It does not work. I would be grateful any corrective measures.

  The easiest way to do it with the event calculate the second field using FormCalc

  Just enter:

  Table1.FooterRow.Subtotal_Labor.RawValue

  in the case

• Performance for the virtual computer table appears in Vcenter server.

  
  Hi people,
  The array of performance for ESXi and virtual computers is not displayed in the server Vcenter Server 4.1 after clicking on the help of Tab.Any seen on this will be appreciated. Please find the screenshot.

  Thank you
  vmguy

  That the said KB - No.

  Maish

• Table spaces

  Hi, I created a form using http://www.emailmeform.com/ and I am trying to paste the HTML code directly in my Web site. Everything works very well and looks good, apart from the fact that when it is, it moves the ajacent table below him, leaving a huge space above my main text body, in both design and published in the view mode. I know almost nothing about HTML and make a bit of a mess of tables and think that's probably why this is happening. Here's a picture:

  

  The paintings are a complete mess, but it's the only way I knew get pictures/text as I wanted.

  Here's the code before adding the form:

  http://pastebin.com/FiUnybHt

  And after:

  http://pastebin.com/1javCuvK

  I know it's a mess, but if anyone can be bothered to decipher, I would be extremely grateful.

  You must set thecell in which your 'Welcome to the cabin of the computer' table is inserted for high vertical-align.

  Open the page in Dreamweaver, click the space above the table. Look on the lower edge of the window and you will see the html tags - select thetag to the left of the last

  tag. Then go to Windows > properties to open the properties panel. Select from the 'Green' 'Top '.

  Your table should now align to the top of the cell in which it is inserted.

• Windows 7: diagnostic policy Service does not

  Our internet does not connect to our PC, even when manually connected with the ethernet cable, but all our wireless devices such as iPhones and laptops to connect properly. We troubleshooted and showed a message saying "the diagnostic policy Service is not running, click to start as administrator." After clicking, we are shown that the error is that the diagnostic policy Service is not running (basically going in a circle), error 5. Everything else on the computer works fine, as far as we know.

  The night before it was passed, we found a little unbalanced PC Tower and we believe that our cat got on the computer table because the documents were scattered. It is possible that the Tower topple made something come loose which prevents the DPS of the race?

  Windows 7 Ultimate.
  Lenovo computer.

  We tried several system restores that have failed.

  I tried all these things and I ended up fix:

  go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Open services and make sure that the service is started.

• Laptop Shake

  Hi, the Forum Microsoft team, I want to just ask a question earlier when I was surfing the net, I hit my computer table on my kneecap and then trembled in my table of the computer, then I just realized how hard disks are sensitive, then when I click on my taskbar, I saw my avast anti virus stopped renewable / spinning and then I restarted my laptop and it was longer than usual in restart mode, I waited until what he went to my office. So I check the last time of my windows folder stomp I saw a bootstat (a dat file) and PFRO (txt file), is this associated windows file error? starting now nothing unusual on my laptop and what to worry? Thanks to the advanced Microsoft Forums team

  Hello

  Thank you for the update.

  In case if you do not see the same behavior, you're good to go. However, in case if you feel the same behavior, and if you think that it is only because of Avast, you want to extract to diagnose the problem. Since you have the subscription left with security software, you can of course re - install.

  To uninstall:

  Press the Windows key + X , and then click programs & features

  Right-click on the program (Avast) and click on Uninstall

  Wait for the program to uninstall completely, and then restart the computer

  Hope this information helps.

• Profit and loss account

  Hello

  I am having trouble understanding how to display the result of the count of a line

  I want to list my categories with the message number:

  Music (3)

  Guitar (12)

  Drum (4)

  I have 2 tables:

  Categories with 2 on the ground - stuff and category_name

  Computer table with several field as id user, name, title, etc.

  I have a cat_id in this picture that refer to stuff

  the InnoDB value

  How to proceed with Dreamweaver?

  > I am having trouble understanding how to display the result of the count of a line

  A result of a county line?  Each line has a counter of a, right? You can rephrase your question.

  > How to proceed with Dreamweaver?

  This isn't really a question of DW, it's a matter of SQL:

  SELECT category_name, count (*) from

  post, categories

  where post.cat_id = category.category_id

  Category.category_name group

• CONFUSION OF SQL QUERY

  Hi all
  
  I have two sets of data like this:
  
  TABLE FAULT_DETAILS

  CUST_ID     Fault_CODE       Customer_Name     Date_Fault_Received     
  1112     AAAA          Jane Smith     01/02/2008 08:00
  1112     AAAB          Jane Smith     01/05/2009 08:00
  1113    AAAC            Hannah Stevens  10/12/2009 07:30

  COMPUTER TABLE

  CUST_ID     Engineer_Started_Date     Engineers_Name
  1112     02/02/2008 09:00     John Alan
  1112     03/02/2008 09:00     Claire Alan
  1112    01/08/2009 13:00     Michael Jordan

  Power required

  CUST_ID     Fault_CODE       Customer_Name     Date_Fault_Received     Engineer_Started_Date     Engineers_Name
  1112     AAAA          Jane Smith     01/02/2008 08:00     02/02/2008 09:00     John Alan
  1112     AAAA          Jane Smith     01/02/2008 08:00     03/02/2008 09:00     Claire Alan
  1112     AAAB          Jane Smith     01/05/2009 08:00     01/08/2009 13:00     Michael Jordan
  1113    AAAC            Hannah Stevens  10/12/2009 07:30

  What I'm trying to do is find what technician did what job. The only way that I can know who engineer did what, is done by the dates.
  
  So for fault_CODE AAAAYou can see John and Claire Alan worked on the fault of Jane Smiths in February. The other fault reported on the account of Jane Smiths refers to the second a defect reported in May and which was worked on by Sarah Jones. Yet once you can see by comparing the Date_Fault_Recieved and Date of beginning of engineer.
  
  Another problem I have is some cars are sent to the garage in a single day and can stay for up to 6 months before the fault is considered. This is because customers do not have the money to get the car fixed.
  
  However I'm not sure how to operate, the usual rank() on rn (partition by order of fault_code of date_fault_received - engineer_start_date), where rn = 1. Does not work as it can affect the same engineer to two different defects.
  
  I hope you can help.

  OK, but you realize that this is inaccurate — because of the way it has been modeled, you are still responsible for get data of buttocks?

  If you are looking for the closest to you engineer_started_date to date_fault_received, then maybe something like this:

  WITH fault_details AS
       (SELECT 1112 cust_id, 'AAAA' fault_code, 'Jane Smith' customer_name,
               TO_DATE ('01/02/2008 08:00',
                        'DD/MM/YYYY HH24:MI'
                       ) date_fault_received
          FROM DUAL
        UNION ALL
        SELECT 1112, 'AAAB', 'Jane Smith',
               TO_DATE ('01/05/2008 08:00', 'DD/MM/YYYY HH24:MI')
          FROM DUAL
        UNION ALL
        SELECT 1113, 'AAAC', 'Hannah Stevens',
               TO_DATE ('10/12/2009 07:30', 'DD/MM/YYYY HH24:MI')
          FROM DUAL),
       technician AS
       (SELECT 1112 cust_id,
               TO_DATE ('02/02/2008 09:00',
                        'DD/MM/YYYY HH24:MI'
                       ) engineer_started_date,
               'John Alan' engineers_name
          FROM DUAL
        UNION ALL
        SELECT 1112, TO_DATE ('02/02/2008 09:00', 'DD/MM/YYYY HH24:MI'),
               'Claire Alan'
          FROM DUAL
        UNION ALL
        SELECT 1112, TO_DATE ('02/05/2008 13:00', 'DD/MM/YYYY HH24:MI'),
               'Michael Jordan '
          FROM DUAL
        UNION ALL
        SELECT 1113, TO_DATE ('01/05/2009 23:00', 'DD/MM/YYYY HH24:MI'),
               'Sarah Jones'
          FROM DUAL)
  -- end test data
  SELECT *
    FROM (
  SELECT fd.cust_id, fd.fault_code, fd.customer_name,
         TO_CHAR (fd.date_fault_received,
                  'DD/MM/YYYY HH24:MI'
                 ) date_fault_received,
         TO_CHAR (t.engineer_started_date,
                  'DD/MM/YYYY HH24:MI'
                 ) engineer_started_date,
         t.engineers_name,
        ROW_NUMBER() OVER (PARTITION BY fd.cust_id, t.engineers_name ORDER BY fd.date_fault_received) row_num
    FROM fault_details fd LEFT JOIN technician t
         ON (fd.cust_id = t.cust_id
             AND t.engineer_started_date BETWEEN fd.date_fault_received
                                             AND ADD_MONTHS
                                                        (fd.date_fault_received,
                                                         6
                                                        )
            )
  )
  WHERE row_num = 1;
  
     CUST_ID FAUL CUSTOMER_NAME  DATE_FAULT_RECEI ENGINEER_STARTED ENGINEERS_NAME     ROW_NUM
  ---------- ---- -------------- ---------------- ---------------- --------------- ----------
        1112 AAAA Jane Smith     01/02/2008 08:00 02/02/2008 09:00 Claire Alan              1
        1112 AAAA Jane Smith     01/02/2008 08:00 02/02/2008 09:00 John Alan                1
        1112 AAAA Jane Smith     01/02/2008 08:00 02/05/2008 13:00 Michael Jordan           1
        1113 AAAC Hannah Stevens 10/12/2009 07:30                                           1
  

• Difference between 9i RAC 10 g RAC

  Hi all
  
  I worked on 10g RAC for quite awhile now. I see now a 9i RAC too. I was looking on the web for a good document that can give differences between 9i RAC and 10 g RAC. I know, there is a new section of features in 10g RAC, but in my case its opposite, I have knowledge of 10g RAC, but do not know much about 9i RAC. I searched the internet but couldn't find something fruitful. I'd appreciate if anyone can share this information.
  
  Best regards
  --
  Anjum

  Hi Anjum

  attached are the main differences in 10g:

  -Changes to internals SQL optimizer
  -Oracle Grid computing
  -Tables AWR and ASH incorporated in Oracle Performance and Pack Diagnostic options
  -The Session history automated (ASH) materializes the Interface Oracle wait over time
  -Data Pump replaces utility imp with impdp
  -Automatic database monitor diagnostic (ADDM)
  -SQLTuning Advisor
  -SQLAccess Advisor
  -Rolling upgrades of database (using Oracle10g RAC)
  -package dbms_scheduler replaces dbms_job of scheduling

  (Burleson thanks for the list of very good)

  Please note that ASM (Automatic Storage Management) and CRS (Cluster Ready Service) were also introduce 10 g

  Consult the otn.oracle.com/rac

  Published by: Hub on November 15, 2008 14:13

• A JAPANESE BOX APPEARS ON THE TABLE EVERY TIME THAT I TURN ON THE COMPUTER! HOW CAN I GET RID?

  2 DAYS AGO, A BOX APPEARED ON MY DESK-TOP & IS PERMANENTLY ON THE SCREEN. IT IS A KIND OF SCAM ASKING MY INFO/CREDIT DETAILS ETC. I CAN'T REDUCE ITS SCREEN SIZE OF QUARTER, HE CANNOT REMOVE, & WHEN I CLICK ON 'X' TOP RIGHT IT DISAPPEARS & RETURNS 30 SECONDS LATER. WHEN I SELECT (IN JAPANESE - I'M NOT TALKING ABOUT) HAS A MESSAGE AT THE BOTTOM OF THE BOX I GET COMPUTER AN ERROR MESSAGE "AN ERROR HAS OCCURRED IN THE SCRIPT ON THIS PAGE" & IT GIVES A URL, BUT WHEN I CLICK ON 'YES' OR 'NO' TO CONTINUE TO RUN SCRIPTS NOTHING HAPPENS.

  WHAT CAN I DO?

  topblanchflower wrote: well, I tried SuperAntiSpyware download - no luck - the annoying box in Japanese is still on my table as soon as I open it. Someone at - it any ideas what to try to get rid of it?

  Hello topblanchflower, you can try to run a Windows Restore Point, date back to the time before this problem arose.

  To do this, go to the start ORB, all programs, accessories, System Tools, System Restore.

  Click Restore and system in a short period of time, a window will open that shows a restore point. Look in the lower left corner, then check the box to show more restore points and select one before the Popup began.

  The system reboot and return to the office and advisor than the Windows Restore Point has been successful or not successful.

  Sometimes malware such as this will be disable and remove all Windows Restore Points to prevent the user to rid the system of the malware.

• Word 2007 - Insert Table of contents constantly causes problems, computer crash!

  I have problems with the functionality of Table of contents for the word.

  I have Microsoft Office 2007 (Home and Student) and it's a genuine copy that I bought brand new an office supply store.

  The product works perfectly apart from the problem with the Table of contents.

  Whenever I try to insert a table of contents in a document, insert the table of contents, but then my CPU will jump up to 99 and Office will freeze (I need to CTRL + ALT + DELETE to quit the program, because I can't even click on the red box X on the corner). I tried to restart the computer, running virus scans, etc. I've been having this problem since I bought Office about 6 months ago and he won't let me create some very important documents.

  I find that the exact time of the accident the most often happens when I click somewhere on the table of contents after inserting the it. In particular, it freezes at the present time any popup 'police' boring and useless box (small police box that arrives just above top of everywhere where the cursor was clicked). The police box appears completely (this is partly translucent) when it freezes.

  Does anyone have any ideas of how I can stop this problem happen? Or how I can stop the police zone little coming to hover above everything I click on?

  Hi qwerty1932,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Microsoft Office, and would be better suited to the desktop support community. Please visit the link below to find a community that will provide the support you want.
  http://Office.Microsoft.com/en-us/help/FX100485361033.aspx?pid=CL100605171033

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Find the table of characters on my computer if it is not in the accessory file

  I write a scientific article for the school and could not find the table of characters on my computer.  I looked in Accessories - System Tools and nothing.  I should I reinstall or at least find a site online that will show you the appropriate key strokes to get what I'm looking for

  Hello

  Start - type in the search box-> find the table of characters at the top of list - double click it to run it.

  You can also right click and COPY then PASTE an icon on the desktop or the start menu.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I already use the creative cloud for my mac table.  I wanted to buy a computer mac laptop.  Can I use my Adobe Creative cloud even for laptop?

  I have a table of Mac computer I have creative cloud with the programs I pay every month.  I am looking to buy a computer mac laptop.  Can I use the my creative cloud for this programs?

  Hello

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone.

  If you install on a third computer, you will be asked to turn off this feature on the other two computers.  You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  If you regularly need to use creative cloud on more than two computers, it would be better to buy an additional subscription.

• Locate the table on the drive in my computer?

  I create a 'stable' ACCOUNT How can I find the table on the drive of my computer?

  Dang, just had no internet connection for over an hour

  SQL> select t.table_name
    2  ,      t.tablespace_name
    3  ,      f.name
    4  from   all_tables t
    5  ,      v$tablespace s
    6  ,      v$datafile f
    7  where  t.tablespace_name = s.name
    8  and    s.ts# = f.ts#
    9  and    t.table_name = 'EMPLOYEES';
  
  TABLE_NAME                     TABLESPACE_NAME
  ------------------------------ --------------------------
  NAME
  ---------------------------------------------------------
  EMPLOYEES                      USERS
  C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS.DBF
  
  1 row selected.
  

  Change EMPLOYEES into ACCOUNT, and there you go.

• Front table, changing size on another computer.

  I have a strange question here. I use indicators table on a front to transmit information to an operator. Everything is the same size and aligned on my system, but when I take it to another system some of the paintings change size. See photos. I tried to adjust the height of the indicator using a property node, but I can't write. All tables use the same font and size. Any help would be appreciated. Thank you.

  

  Hi guys,.

  set the police exactly the same for all the tables and tags. I usually use Tahoma 13 (instead of generic "Application font").

  Then set this font in the app INI file using the keys of FONTS:

  FPFont="Tahoma" 13
  BDFont="Tahoma" 13
  appFont="Tahoma" 13
  dialogFont="Tahoma" 13
  systemFont="Tahoma" 13