Computer Vista will not "Shut Down"

Similar Questions

• Windows vista will not shut down or restart

  I have problems with windows vista Dell xps 420 machine which is not closed to restart or exit hibernate without a hard reboot.  It is also in trouble, install programs, for example windows 7 upgrade advisor.  Dell Diagnostics are all ok.  All of the suggestions.

  I have problems with windows vista Dell xps 420 machine which is not closed to restart or exit hibernate without a hard reboot.  It is also in trouble, install programs, for example windows 7 upgrade advisor.  Dell Diagnostics are all ok.  All of the suggestions.

  Hey neurodent

  Check your system files and possibly do a repair installation if the serious errors of the system cannot be fixed

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to do a repair installation

  you will need to borrow a vista microsoft dvd if you don't

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• IMac 27 "el Capitan 10.11.5 will not shut down

  Hi,

  iMac will not shut down or restart.

  When you click on the start/stop command, the screen clears in all icons and menus/finder but stuck showing the wallpaper...

  Only way is to hold the power button.

  Acted at the time so I installed a game (stellaris) with third-party software needed to play the game.

  Things I've tried so far:

  -First aid volumes. Came out OK.

  -Clear the game and the third party soft. OK

  -Restarted several times held close button. Problem unsolved.

  -Time to a game of prior time Machine install. Problem unsolved

  -Downloaded Capitan updated but could not be installed because it requires to restart which is impossible.

  Thank you in advance for any help.

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• iMac will not shut down or restart...

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  DRM92692 wrote:

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  Your office is frozen?   If not, stop or reboot can wait for something to finish - you close all open applications?   Allow you your system to connect to the internet (these pesky background downloads or you are not always aware of synchronization)

  As for hard shutdown - with button / stop

  Have you held in the power button for about 15 seconds to stop hard - otherwise he's asleep.

  After unplugging - press and hold the power button in for 15 seconds to evacuate the power of mac - that can help.

• Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

  My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

  So far I have tried:

  -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

  -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

  -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

  -Another forum suggested turning off the M-Audio card.  Tasted it.

  -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

  Suggestions of new, I can add to the list?

  After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

  ET1

• Computer Vista will not be stopped

  I tried to shut down my computer for days now.  Vista - and still running, he simply refuses to stop.  Suggestions anyone?  I have all the SP2 updates and I tried just August everything I read about to solve this problem... except the only thing that works!  Thank you

  Hello

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: disable the functionality of management of power in network adapters

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all of the checkboxes are checked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2:

  If the problem persists, you can try to perform the clean boot and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

• iMac late 2012 will not shut down or restart

  El Capitan, my iMac running will not stop or restart by choosing shut down or restart. I have to hold the power button to close and then restart your computer manually. Any ideas?

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• New laptop will not shut down or restart completely

  I have very recently (last week) got a new laptop Acer Aspire E 15 Touch, but I can't seem to stop or restart it.
  The first time I stopped it it close normally, but since I closed it down to do updates (110) there will be no more.

  I'm going to stop it and it just sits on the "shutting down" screen for hours - the same with restart.

  I just had to hold the power key to close it (when it is not closed) or just put on sleep.

  Thank you.

  If you are not able to stop or restart the computer normally due to problems with the Windows updates, you can run the Windows Update Troubleshooter from the following link and check if this is useful:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  The following link may also be useful:
  https://support.Microsoft.com/en-us/GP/Windows-Update-issues/en-us

  If the problem persists, we recommend to take it back to the seller for help or contact the nearest respective Acer service center using the following link:
  http://us.Acer.com/AC/en/us/content/service-contact

  Hope this will help you.

• Windows 7 will not shut down or restart

  Hi guys, basically for the 3 days since my computer won't shut down or restart. I normally turn off every night and I've never had this problem before. I used the tool to update window update, but it says that it cannot complete the installation until I restart, but obviously I can't do that either.

  I tried to change the power does-that is to say buttons when the laptop closed = stop down. But even that won't work.

  Anyone has any ideas that could help me solve this problem?

  Thank you.

  Not sure, but what about the command 'shutdown '? (perhaps with the /r (reboot) option)

  http://TechNet.Microsoft.com/en-us/library/cc732503%28V=WS.10%29.aspx

  or

  http://pcsupport.about.com/od/commandlinereference/p/shutdown-command.htm

• Computer Vista will not print to Deskjet 930c on home network

  Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

  But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

  I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

  So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

  Any ideas or solutions?

  Hello

  Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

  To manually add the shared printer, follow these steps:

  1. install the printer locally in following second method: connecting the cable in parallel below:

  http://support.HP.com/us-en/document/c01655752

  2. go into your PC host (computer B), right click my computer and select Properties.

  Find the name of computer on this screen.

  3. go in Control Panel > printers and faxes.

  Right-click on the printer and select Properties.

  Open the tab end hand note the share name

  Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

  4. go to your Vista machine and open Control Panel > printers.

  Click with the right button on the 930c configured in step 1 and select Properties.

  Open the Ports tab.

  Click Add a new port.

  In this list, select Local Port.

  Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

  Confirm the changes and check any change.

  If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

  Shlomi

• BlackBerry Smartphones Blackberry Storm - e-mail Message indicator will not shut down

  Hello:

  In the upper left corner, there to the e-mail icon and a small number 1.  I checked everwhere - all folders, etc. - There is no message.  I called Verizon and they have studied and also find no online message.  They said they would search and call me in 20 minutes, 2 hours - haha) I deleted the email account and always the indicator will not go away.  I took out the battery for a while. The indicator is always there... mocking me...   Help, please! I really don't want to have to go to the Verizon store for 3 hours, while they play with her.  Thank you!!

  I had the same problem. Turn off the phone and remove the back. Press the small brass color reset buttn on the left side under the battery. Phone resets and message indicator will disappear.

• my computer will not shut down

  When I turned off my computer, it doesn't have the wide instead it restarts. If I don't use it for a while, it goes into hibranation and not going

  Hello

  Recent changes?

  Try to change the power plan and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  All the best :-)

• computer will not shut down correctly after the installation of cloud creative, cc of lightroom and photoshop cc.

  Recently, I installed the trial versions of cloud creative, cc of lightroom and photoshop cc and noticed that my computer would be closed in an orderly fashion.  It either freezes once I chose the option stop or displays the message Windows is going down, but then freezes.  Here are the latest articles that I installed before this problem and I have not made further changes to my computer.

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Computer * Vista * will not recognize Sansa Clip

  I checked the USB port and it is fine, but when I plug it in it does not appear on my computer.  "I tried on my computer laptop son * Windows XP ' and it shows up there.  Can someone help with the Sansa Clip and Vista?  Thanks in advance!

  Have you tried switching USB mode of the Meteorological Service of Canada, or forcing MSC mode Clip (hold the Center button down when you connect USB cable between computer and Clip)?

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.