Computer warms up after win xp sp3 update

Similar Questions

• Computer screen problem after you download the update from Microsoft Windows

  My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

  Later, I noticed the screen problem. Can someone help me please on this issue?

  Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

• I have WIN XP, SP3, updated Firefox 3.6.16, mcafee internet security suite - can't go back a page starting point for Web sites. By clicking on it in the HISTORY is the only way that I can. Started after upgrade from 3-4 weeks ago. FF4 on different PC is

  Neither pc had this problem until after the update 3-4 weeks ago.

  I don't know if it's still causing a problem, but the McAfee site Advisor has been reported to cause problems with the back button, the Advisor site disabling or uninstalling it can solve the problem.

  I had the Counsellor installed but site that you do not at the present time.

• Equium A60 Win XP SP3 update problem

  Of the major problems upgrading a re-installation of SP2 to SP3. Had to re - install because of stability issues. I tried all the many solutions proposed in article Microsoft ID:822798 without success. Installation of the SP3 pack always gets the part passing through and still gives me the error dialog update SP3 "failed to install catalog files. SP2 is stable, but simply will not be upgraded. I tried a variety of approaches, including a try immediately after re-installing XP SP2 with + without any security software or loaded drivers, but same problem no matter what approach.

  I'm running the original BIOS - is an update V 1.90 likely to solve anything. I was tought not too touch BIOS upgrade, unless she has a performance advantage?

  If this isn't the case, someone has other suggestions.

  Toshiba portable computer Satellite A60
  PSA67E
  RAM 1 GB +.
  WIN XP SP2

  Thank you

  Hi mate

  How about including the SP2 and SP3 and building new Win XP disk in Win XP installation disc?

  You can use a software called nLite. It allows you to integrate the drivers and updates on win xp disk.

  After that, you can use the new disk to reinstall new OS

• Realtek sound control panel disappeared after the XP sp3 update

  After updating XP Pro x 32 to service pack 3 (and everything else the updates of Windows including IE8) in the SONY VAIO VGN-TX790P laptop ' control panel Realtek in Windows Panel disappeared and nothing works for Realtek.

  Normal sound is OK. I tried the SONY VAIO VGN-TX790P page update and also update to the latest version of the Realtek 2.65 for XP of Realtek driver without success.

  Tried all the possible solutions, the search in Internet and nithing allows Realtek Control Panel.

  There is a default sound when try start Control Panel Realtek Windows folder manually but the Control Panel does not appear.

  Nothing on the incident in the event viewer.

  No solution in the SONY forum. Can't find anything in Realtek.

  This issue has been observed so put XP updated to sp3 RC, but my case is not related to that.

  Solution in THIS page does not apply.

  Thanks in advance for any help. All the best.

  Have you tried uninstalling the driver in Device Manager (click with the right button on computer > properties > Hardware tab > Device Manager), then reinstall the driver found on the website of manufacturers like here?

• Limited with connectivity cable LAN & WLan after Win and IE7 update

  Hi all

  It's now 2 days I'm trying to fix a new bug on my Satellite P100. I don't know if it's related, but yesterday I received the automatic installation of IE7 and KB (914440 and 915865).

  And since restarting my computer can't connect to the network or the ethernet cable or wifi on. The network is present, but the computer never gets an IP address from my router and dhcp. I have another computer works well on this router.

  When I use configfree util and attempt a repair, I have a gel.

  I have now to uninstall IE7 and the two KB, zonealarm. But still no change, I always have this connectivity limiting or didn't exist do not.

  You have any ideas on what I could test it?

  Thank you very much in advance
  Phil

  Hello

  Hmm. have you tried reinstalling the drivers LAN and WLan?

  I found some nice tips in the internet, it seems that some MS updates could have a bad influence on some drivers or change registry entries and so system problems may appear.

  That the Lan card did you use? Intel? On the page of the Toshiba driver I found tosh lan driver and intel driver lan so if you use an Intel card you can also see the Intel Web site for an update...

• Win XP SP3 installs not because of disk space, but I have 50 GB of available disk space

  I tried to install Win Xp SP3 update and still get the message that it cannot install because space low disk.  I erased the disc as possible and I have 50gigs of free space, but I still get this error.  How much space do I need?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 02:05 on Friday, February 10, 2012

• Satellite U940 - fan of strong cooling after Windows 8.1 update

  Hello

  I have a month old Satellite U945-S4390 and I started to have this problem after the upgrade to Windows 8.1 a few days ago.

  I started windows 8, and the fan returned to be quiet.
  When I reinstalled windows fan 8.1the began once more to be strong.

  I am convinced that it is a matter of 8.1 for Windows (at least for me).

  Anyone else having this problem? All proposed the solution?

  > I started windows 8, and the fan returned to be quiet.
  > When I reinstalled windows fan 8.1the began once more to be strong.

  After winning 8.1 update, you must install all drivers and utilities Toshiba as a pilot system of Toshiba in the right order.
  The Toshiba driver page provides installation instructions for all models of 8.1supported Win.
  Installing these drivers is very important about the functionality of good laptop

• Computer does not start after the installation of Win XP SP3

  original title: ServicePack 3 does not work

  After loading service pack 3 my computer does not upwards, unless I use safe mode. It restores not to any restore point. I uninstall and go back to service pack two and get constant reminders to update three when it won't work. After saying it works fine if a little slow in two so is there any point of update.

  Recently, I reset my computer to factory settings to erase the disc from loads of unwanted waste and programs. Reloaded ServicePack two, he wouldn't go back with gel. After reading the old posts, I found a link to Jespers blog. It contained a small tool that intelPPM problems detected and then given the option to turn off the setting. http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx.

  This fixes the problem and service pack three charges and now works fine. The tool is loaded in seconds.

• Computer laptop 15-p047na: laptop won't start up after the Win 8.1 update

  I bought this laptop on 16 December and got with the transfer of files and my old desktop PC applications.  Everything is OK until last Sunday, when I left the laptop is a Win the day update 8.1 overnight.  The next day, he asks for a restart, but then, after initial HP logo, the screen turns white for a few minutes.  Then the Win 8 screen with a message: "LogonUI.exe - Application error.  The instruction at 0x00b1645a referenced memory at 0x00000008. The memory could not write. »

  When I click OK, the screen turns off then flashes.  The message appears again, with the same result.  I tried to start the computer from a CD and a USB key, after changing the boot sequence in the screen of the BIOS/UEFI, but with the same result.  What should I do?  Help welcome!

  Hi @agniculus ,

  Welcome to the HP Forums!

  It's a place dynamite to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that after a Windows 8.1 update, that your system does not start properly.

  First of all have you tried a hard reset?

  Here is do a Hard Reset or forced to reset.

  Here is a link to the computer does not (Windows 8) which can also help.

  You can also try of using Microsoft System Restore (Windows 8) back to the front, what happened.

  You can start safe mode?   Safe mode of Windows 8

  Safe mode, you should be able to run the troubleshooter and do the restore.

  Good luck!

• After win 7 update at the start of my stops of the computer in Mode safe

  After win 7 update to start my computer continues to Safe Mode to choose (new) Win 7 or Vista operating system (old / deleted).  How can I fix it?

  Original title: win 7 start

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• Why Search KB940157 4.0 will not work on Win XP SP3. In addition, impossible to install any update more.

  Research program in the original installation of Win XP SP3 caused the computer to freeze if the search engine has been expanded.   So I downloaded and installed Search 4.0.  It seems that works do not exactly the same.  IF I do not enlarge the window, it doesn't seem to work, but any change in the size of the window causes hang up immediately on the computer.  Must pull on the supply cord to recover.

  As for updates, here's a list updates failed, I tried to load onto my system through Windows Update:

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352) updated Microsoft Sunday, January 8, 2012

  Windows XP security update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424) updated Microsoft Sunday, January 8, 2012

  Windows XP Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351) Sunday, January 8, 2012 update to Microsoft Windows XP

  Currently, the update process hangs up with 35 updates of uninstalled "high priority" pending, which apparently will install not until the (s) that failed is installed, if my machine seems totally non upgradable...!

  That seems to relate to programs of the .NET Framework.  Remove all would fix them this...?  What I would lose without .NET programs installed...?

  Hello

  What is the error message accurate/complete you receive the Windows Update issue?

  Depending on the issue with Windows search:

  Method 1:

   

  Step 1: Check in safe mode

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Uninstall and reinstall Windows Search and check

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Follow the below mentioned methods for Windows Update:

  Method 1: To run the fixit for Windows update

  1. Please click the link below.

  http://support.Microsoft.com/kb/822798

  2. run the Fixit.

  Restart the computer and check it please for windows update

  Method 2:

   

  Problem could be with the .net framework is corrupt, so try to repair using link below.

  http://support.Microsoft.com/kb/976982

  Hope the above information is helpful.

• Reinstall WIN XP SP3 to new computer with no operating system

  I would like to move my WIN XP SP3 old laptop with no operating system

  Thank you

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP on your new computer install all device drivers, starting with the mother/chipset, LAN, Audio, USB, SATA card, drivers, and so on.

  Notes:

  If there is no XP driver not listed that your computer is not compatible Windows XP.

  You must uninstall the old computer XP, if you plan to use the same XP product key.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• XP SP3 update causes computer to only start in safe mode

  My daughter had XP IE8 running on his computer, site update Windows XP SP3 download.  I downloaded and installed, however it won't start in safe mode. When I remove SP3, the computer loads normally.  I then uninstalled IE8 (went back to IE6), made sure I had the pre-requistes, followed the steps as outline on the microsoft site, downloaded SP3 again and installed.  It will only re-start in safe mode.  I tried everything, no matter what I do, XP SP3 causes the computer to restart in safe mode only. I'm totally frustrated. Can someone help me?

  What is the origin of XP SP3 only start in SafeMode anfter installation? What can I do to fix this?

  Continuous restarts or can only to Safe Mode boot after installing WinXP SP3?

  See: http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx

  [NB: the above has been updated several times and now includes "a small tool that allows to detect the problem IntelPPM and mitigate before installing (WinXP SP3)".]

  Possible workaround: boot safe mode and rename INTELPMM. SYS to INTELPMM. OLD.

  Other references include:

  • Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
    http://support.Microsoft.com/kb/953356
  • HP and Compaq Desktop PC: restart the computer after the display of the Stop error 0x0000007E after installing WinXP SP3]
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

• A security update (KB2584146) has been installed. It shows "installed successfully." Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. Win XP SP3 (Build 2600).

  A security update (KB2584146) has been installed. After installation, it shows properly "installed". Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. It shows also 'successful' in the history of my Microsaoft update. Win XP SP3 (Build 2600).

  It's an old update. Wonder why you just get it now.

  First try this...
  Click Start > run > type chkdsk/r > press OK or press the Enter key. A cmd window will appear telling you that the volume is in use and you want to plan its next reboot. Type y and press ENTER. Then restart.
  Try to install the update and check that it installed properly by doing another analysis of Windows Update.

  If this does not do...
  Download the update manually, on your desktop to the http://www.microsoft.com/en-us/download/details.aspx?id=28608.
  Click Start > run > Browse. In the Browse dialog box, double-click WindowsXP-KB2584146 - x 86 - ENU.exe. The box open term should have the path now. Add a space and an x at the end.
  Press OK or press the Enter key.
  You will get a dialog box with the path to your desktop already filled.
  After Office add a slash and the name of the folder so that we end up with something like C:\Documents and Settings\\Desktop\KB2584146.
  Go to this folder, and then in the SP3GDR folder.
  You can see packager.exe.
  Right-click to copy.
  In the box to run, type dllcache, then press on enter.
  Paste the file in there, replacing the one already there.
  In the run box, type system32, then press on enter.
  Paste the file there too by crushing the already there.
  Is there a lot of folder there. Make sure you do not paste in a subfolder. You want to the root of system32.

  Go to Windows Update and confirm that it no longer wants to install.