Concurrent Manager to the CCR failover
Hi all
We have configured Oracle Applications 11i with node 2 CARS. I have a confusion.
Recently, one of the instance is down due to which competitor node is also down. It is a 3-tier application.
DB on a node, simultaneously on a single server node and application and report on a node.
In my case when the instance we went to bed, the competing application or the session would failover to the surviving instance happened in our case.
I wanted to know if the simultaneous session are toggled to surviving or this node should I set up a simultaneous failover.
PCP is not configured in our case.
I need your suggestion on this.
Please suggest.
Thank you
Hello
Simultaneous failover can be implemented successfully by setting the APPLDCP parameter on it and FNDREVIVER to allow the context file.
Set the CFP on off and checked the failover profile by taking the instance down where concurrent managers are up. Renovator will start the ICM on surviving instance and ICM will show other concurrent managers.
Please try all of the above settings and check the failover without PCP with node 2 CARS.
Hi Shakti,
I already said that the CFP is not configured in our case we have a server manager simultaneous and a single request and 2 DB node.
Thanks for all the help.
Tags: Oracle Applications
Similar Questions
-
the concurrent Manager on the application server
We need the simultaneous Manager to the server application.
Please guide me in details.
Kind regards.Use quick Clone.
Cloning of the Oracle Applications Release 11i with rapid Clone [ID 230672.1] - 5. Reduce the number of nodes in a multi-node (fusion APPL_TOP) system
Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]Thank you
Hussein -
SQL query to assign several concurrent programs to the concurrent Manager.
Hello
You have any script to assign a list of program contributing to separate concurrent managers. Currently, there are more than 100 programs need to be assigned to the manager.ut
We do front end, but it will take quite a long time to complete this task.
Could you please help me on this.
Thank you and best regards,
Simone.
Hi Simone,.
First of all I need a sql query to find out what custom programs are assigned to which Manager.
Please see:
How can I tell which concurrent Manager handled a simultaneous [ID 344011.1] application/program
Find all programs assigned to the specialization Manager rules? [271283.1 ID]
Second, I have to give these programs customized to different custom managers.
See if this helps:
https://forums.Oracle.com/thread/2343489
Thank you &
Best regards
-
Assign simultaneous request to the concurrent Manager
EBS R12.0.6
DB 10.2.0.4
I need to know, not existing or several simultaneous requests to assign a new especially created the concurrent Manager.
Please suggest me in steps.
Thank youuser11969485 wrote:
Thank you very much for the provision of documents of the CFP, I will go through it.Could you please tell me why we create CM and assign it to the CRs, it is used to the fast processing of applications of this?
It will make it faster for the CM to pick up the process (do not accelerate the current transformation of the Czech Republic), as well as spread the load between the CMs there's less pretension - how to split the workload of many managers of competitor [473310.1 ID]
Thank you
Hussein -
How to tune the concurrent Manager
Hello
I work R12.1.2.i submitting a query to run the report and simultaneous Manager gets stuck.last night I submit an application for export AP report but it not yet.i full am facing this problem couple of days.any help in this regard is highly appreciated.
Kind regards
UmairSalvation;
I work R12.1.2.i submitting a query to run the report and simultaneous Manager gets stuck.last night I submit an application for export AP report but it not yet.i full am facing this problem couple of days.any help in this regard is highly appreciated.
Is there an error on con. Manager of newspaper files? Please follow threads that might be useful for your question below:
Concurrent Manager in time real tune
Oracle applications databasetune simultaneous Manager
Oracle applications databaseVery slow competitor Manager
Several step error caused by SQL syntax?Respect of
HELIOS -
Print PDF/XML report in the concurrent Manager
Hi all
We have an obligation to create a personalized program check Printing XML Publisher and who needs to be integrated with program Format Standard.
I heard that we cannot print report XML report/PDF directly to the Manager of competitor. If it is true, I would like to know the reason or any pointer where I can get that.
If there is no work around for this so it will be great and I'll be really happy to know that.
Thank you for give a thought to my request.
Thank you
AryanAryan salvation;
Please follow Hussein snoussi larger post on the same question
Direct pdf print of the concurrent Manager
Also, you can follow:
http://www.Oracle.com/technology/products/XML-Publisher/docs/XMLEBSRep.PDF
http://www.appsbi.com/print-XML-Publisher-PDF-reports-via-the-concurrent-ManagerI hope that those that are useful for you
Respect of
HELIOS -
on the stateful failover active / standby
Hello guys.
I have two ASA, same model and material. ASA have configured stateful failover active / standby by someone a few years ago. It worked normally until recently and no one changed the configuration. Then the secondary unit can't. Ping between 2 interfaces is ok. Please help me solve this problem.
on the main site
interface Management0/0
STATE failover Interface Description
management only
interface GigabitEthernet1/1
Failover LAN Interface Description
failover
primary failover lan unit
failover lan interface failover GigabitEthernet1/1
The link with failover Management0/0 status
failover failover interface ip 172.16.1.1 255.255.255.0 ensures 172.16.1.2
State of the failover interface ip 172.16.0.1 255.255.255.0 ensures 172.16.0.2
on the secondary site
interface Management0/0
STATE failover Interface Description
management only
interface GigabitEthernet1/1
Failover LAN Interface Description
output of the show failover on PRIMARY
Show execution of failover
failover
primary failover lan unit
failover lan interface failover GigabitEthernet1/1
The link with failover Management0/0 status
failover failover interface ip 172.16.1.1 255.255.255.0 ensures 172.16.1.2
State of the failover interface ip 172.16.0.1 255.255.255.0 ensures 172.16.0.2
See the resumption of F1 #.
Failover on
Unit of primary failover
Failover LAN interface: GigabitEthernet1/1 failover (maximum)
Frequency of survey unit 1 seconds, 15 seconds holding time
Survey frequency interface 5 seconds, 25 seconds hold time
1 political interface
Monitored 5 256 maximum Interfaces
Version: Our 8.2 (2), Matt 8.2 (2)
Last failover to: 08:03:11 ULAST January 1, 2003
This host: primary: enabled
Activity time: 5755203 (s)
slot 0: ASA5550 hw/sw rev (status 2.0/8.2(2)) (upward (Sys)
Interface Backup2 (10.2.5.1): Normal (pending)
Internet (202.131.225.90) interface: No link (pending)
Interface Backup1 (10.3.5.1): Normal (pending)
The interface server (192.168.227.1): Normal (pending)
Bank interface (10.20.1.1): Normal (pending)
Slot 1: rev hw/sw ASA-SSM-4GE-INC (State of 1.0/1.0(0)10) (top)
Another host: secondary - failed
Activity time: 0 (s)
slot 0: ASA5550 hw/sw rev (status 2.0/8.2(2)) (upward (Sys)
Backup2 (0.0.0.0) interface: no connection (pending)
Interface (0.0.0.0) Internet: No link (pending)
Interface (0.0.0.0) Backup1: Normal (pending)
The interface server (0.0.0.0): Normal (pending)
Bank interface (0.0.0.0): Normal (pending)
Slot 1: rev hw/sw ASA-SSM-4GE-INC (State of 1.0/1.0(0)10) (top)
Failover stateful logical Update Statistics
Link: State Management0/0 (top)
Stateful Obj xmit rcv rerr xerr
General 76184539 0 767513 6
sys cmd 767328 0 767326 1
up time 0 0 0 0
RPC services 0 0 0 0
25878669 0 11 5 TCP Conn
Conn UDP 40545710 0 40 0
ARP 8987688 0 136 tbl 0
Xlate_Timeout 0 0 0 0
Tbl IPv6 ND 0 0 0 0
VPN IKE upd 1140 0 0 0
VPN IPSEC upd 4004 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP session 0 0 0 0
Logical update queue information
Heart Max Total
Q: recv 0 7 6522961
Xmit Q: 0 34 106685671
output of the secondary recovery
See the resumption of F1 #.
Failover on
Secondary failover unit
Failover LAN interface: GigabitEthernet1/1 failover (maximum)
Frequency of survey unit 1 seconds, 15 seconds holding time
Survey frequency interface 5 seconds, 25 seconds hold time
1 political interface
Monitored 5 256 maximum Interfaces
Version: Our 8.2 (2), Matt 8.2 (2)
Last failover at: 03:36:23 ULAST December 15, 2013
This host: secondary - failed
Activity time: 0 (s)
slot 0: ASA5550 hw/sw rev (status 2.0/8.2(2)) (upward (Sys)
Backup2 (0.0.0.0) interface: no connection (pending)
Interface (0.0.0.0) Internet: No link (pending)
Interface (0.0.0.0) Backup1: Normal (pending)
The interface server (0.0.0.0): Normal (pending)
Bank interface (0.0.0.0): Normal (pending)
Slot 1: rev hw/sw ASA-SSM-4GE-INC (State of 1.0/1.0(0)10) (top)
Another host: primary: enabled
Activity time: 5743217 (s)
slot 0: ASA5550 hw/sw rev (status 2.0/8.2(2)) (upward (Sys)
Interface Backup2 (10.2.5.1): Normal (pending)
Internet (202.131.225.90) interface: No link (pending)
Interface Backup1 (10.3.5.1): Normal (pending)
The interface server (192.168.227.1): Normal (pending)
Bank interface (10.20.1.1): Normal (pending)
Slot 1: rev hw/sw ASA-SSM-4GE-INC (State of 1.0/1.0(0)10) (top)
Failover stateful logical Update Statistics
Link: State Management0/0 (top)
Stateful Obj xmit rcv rerr xerr
General 765518 0 35843181 874
sys cmd 765518 0 765516 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP 0 0 12671303 80 Conn
UDP 0 0 13432853 133 Conn
ARP 0 0 8968384 661 tbl
Xlate_Timeout 0 0 0 0
Tbl IPv6 ND 0 0 0 0
VPN IKE 0 0 1137 upd 0
VPN IPSEC 0 0 3988 upd 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP session 0 0 0 0
Logical update queue information
Heart Max Total
Q: recv 0 9 72011189
Xmit Q: 0 1 765518
You have a couple no link on your high school as well as a message no link on your primary.
Backup2 (0.0.0.0) interface: no connection (pending)
Interface (0.0.0.0) Internet: No link (pending)
I recommend that you check these cables. Don't forget that if you changed the default configuration, a failure of the single, or problems of connectivity even interface between an interface on the two ASAs fail.
If this does not help, try entering the command interface of the monitor for the interfaces.
--
Please do not forget to rate and choose a good answer -
Primary domain server admin can be used to control the server managed in the secondary area?
Hi Experts,
I have 2 boxes of unix, and I have 1 installation of weblogic on each (primary) and secondary site.
The implementation is as listed below:
PrimarySite
MainDomain: 1 Admin Server, managed server 2, 1 cluster
SecondarySite
MainDomain: 1 Admin Server, 2 servers managed, 1 cluster
Questions
1. can I use Admin Server primary site to control/manage servers managed at the secondary site and use the secondary site to control the server managed in the main site?
2. I'll be able to have smooth failover and replication of cluster1 session in a primary site to cluster2 in the secondary site.
Tumi
(1) server of a Domain Admin cannot control all servers managed from any other domain.
(2) a load balancer allows you to switch between sites and implement cross-cluster replication as described in the link below: failover and replication in a Cluster -
query to find concurrent programs defined in each queue of concurrent Manager
We have custom defined concurrent queues and then included applications / programs under him.
In this way, we are seggregating the load on multiple queues, and applications servers.
To check, I want to find what programs are running / actually provided for in the title of each queue.
I see the same thing from the application interface. How can I find the same form backend database.
TO THE
How can I tell which concurrent Manager handled a simultaneous [ID 344011.1] application/program
Find all programs assigned to the specialization Manager rules? [271283.1 ID]
Thank you
Hussein
-
Concurrent Manager actual is equal to zero, and target has some value
Hi all
In our test environment, a developer said today his request completed by idle, nomanager. I checked the concurrent Manager related to this request, is to show real is zero and target as 4. This means that manager special simultaneous is broken?...
I checked the status of Manager simultaneous using adcmctl.sh. It shows the internal crib not active at the moment. Concurrent active users request completed successfully in manager.what standard, but does that mean?
Please help me solve this problem.
Thank you, Jay
Published by: user9956349 on June 2, 2011 12:07 AMIn our test environment, a developer said today his request completed by idle, nomanager. I checked the concurrent Manager related to this request, is to show real is zero and target as 4. This means that manager special simultaneous is broken?...
Yes.
I checked the status of Manager simultaneous using adcmctl.sh. It shows the internal crib not active at the moment. Concurrent active users request completed successfully in manager.what standard, but does that mean?
Check this log file specific CM for more details about the error. Also, bounce the CM using check and adcmctl.sh script then (you may need to run the cmclean.sql script before raising services).
Thank you
Hussein -
Concurrent Manager problem after cloning
After cloning of all oracle Windows services start, but only the concurrent Manager service is throwing this error.
Please guide what to do to solve this problem as the clone should be given to users immediately for a few important tests.
---------------------------------------------------------------------------
Application object library: processing simultaneous version 11.5
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Internal concurrent Manager started: May 7, 2009 13:00:56
---------------------------------------------------------------------------
Could not contact Service Manager FNDSM_TESTDB_KLONE. The TNS alias might not be
located, the listening on TESTDB process could not be contacted, or the listener
Could not generate the process from the Service Manager.
Could not contact Service Manager FNDSM_TESTAPP_KLONE. The TNS alias might not b
e is, the process of listening on TESTAPP could not be contacted, or listening
UH failed to generate the Service Manager process.
Deal monitor session started: May 7, 2009 13:00:59
Could not contact Service Manager FNDSM_TESTAPP_KLONE. The TNS alias might not b
e is, the process of listening on TESTAPP could not be contacted, or listening
UH failed to generate the Service Manager process.
Could not contact Service Manager FNDSM_TESTDB_KLONE. The TNS alias might not be
located, the listening on TESTDB process could not be contacted, or the listener
Could not generate the process from the Service Manager.
End of session monitor process: May 7, 2009 13:01:02Saami
Check the entries in the tnsnames.ora file? Also, check that the application is running.
Kind regards
Hussein -
Latest version of Firefox, keep up to date. 8.1 Windows running on del optiplex 620, 2 GB of ram, 80 GB disk partitioned with Win10 on the other. Panda free av and malwarebytes free running. Never had any problem with Win 8.1 up to now, I have returned to it because of many problems with Win 10. Did you check Event Viewer, nothing, checked for crash report, nothing. No malware not reported. Whenever the only solution is to stop Fox with the Manager of the tasks and then restart when Fox goes back to where she was.
https://UK.Yahoo.com/ I noticed no problem in the last two sessions, perhaps the problem is resolved, will not display rear reccurrence as appropriate.
-
Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.
No, but
I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...
The other annoying problem would be the user modifies the device name when they connect it iTunes...
- the %destinataire% email - address email (the EMailAddress attribute)
- first_name % - first name (FirstName attribute)
- full_name % - full name (attribute RealName)
- % of guid guid (GeneratedID attribute)
- last_name % - last name (the LastName attribute)
- the title of the post (the JobTitle attribute) %
-% mobile_phone % the number of mobile (laptop attribute)
- short_name % name run (the RecordName, generally the name of the account attribute)
The variables of the unit are:
- % BuildVersion % - full OS version on the device
- ICCID % - ICCID (from the SIM card)
- IMEI % - IMEI (International Mobile Equipment Identity)
- OSVersion % - common version number of the operating system of the device
- ProductName % - name of the product
- SerialNumber % - serial number
- % WIFIMAC %-MAC address of the WiFi interface
-
Satellite A200 - 26 d - error code 19 Device Manager on the USB ports
I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».
I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.
Hey JP317!
If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.
So check the site Web of Intel for an update and you should also find Windows 7 drivers.
If you have any other questions, please let us know!
-
I use macbook pro.
I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.
Please help solve this problem.
This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.
Maybe you are looking for
-
Nothing happens when I try to sync my Treo on my Mac
Hello! I'm really desperate. I'm used to be able to sync my Treo on my Mac without problem. For a few months, when I plug my usb on my Treo cable and press the HotSync window appears but nothing happens. I tried Missing SYnc, which I use to sync my d
-
DetermineReportFilePathNameExpr missing dll Testand 2014 SP1
In my sequence of process template is only a call to DetermineReportFilePathNameExpr in content modelsupport2.dll. (Teststand 2014 64 bit) This call makes the Teststand sequence editor stop working. I guess (?) that the reason Miss dll as follows My
-
HP Pavilion G6-2292SA: selected image is not authenticated
A few months ago my laptop came with the message 'selected image is not authenticated to' but I just left him because I was in the middle of loads of deadlines United and had no time to try to sort them. I turned on my laptop about once or twice sinc
-
Hiding the windows 10 updated software in Windows 7 Sp 1
Running Win7 Sp1 without problems. How to prevent Windows Update from automatically and continuously attempt to install Windows 10 after I was informed that my video card (GeForce 6150 THE) is NOT compatible. I see no possibility to hide the update
-
I can I transfer files from the internal memory of my bb to my micro SD memory card? any1 answer asap im really frustrated by this and I want to know how to move my mobile PHONE to my memory card and to make them automatically go to my memory card pl