Conditional evaluation of program steps after a decision rule
Available in the program action steps have this note when you pass the stage immediately after a decision rule:
(Please note: conditional assessment of this step is not permitted, it can not be placed immediately after a decision rule)
Means that we can have only a particular action as the very next step after a rule of decision? Or does that mean that you can have this action after a decision rule but must always apply the action and just may not apply a condition it? The formulation leaves me a little puzzled.
Thank you.
Rob,
This message indicates that you cannot perform this step conditionally because it follows a rule of decision. You can, however, always use this action, but it should still run. If you need to apply a condition to this step, place a direct step between the decision rule and your condition step. This will allow you to set your conditions.
Brad
Tags: Marketers
Similar Questions
-
Program generator: try new decision rule vs waiting for a specified time.
I want to just make sure I understand: when I use the rule of decision re feature - try, for example, for a week, members "sit" at the level of decision rule for a week before moving on to the next step?
Currently, I use steps of waiting and no rules of decision to try again. For example, I have a step 'send an email 1', then another step "wait 7 days", then my decision rule is "Outlook opened email 1", way Yes leaves program, no path sends e-mail 2.» It would be better if instead, I 'send email 1', and then the decision rule "they opened email 1", way Yes leaves program, no way would try this rule of decision for 7 days and then send to "email 2" step without using the waiting stage?
I do not use try again for more than hourly, if my Bulk mode would be unaffected.
So, what are the advantages of disadvantages of the use of each? Any preference?
Thank you!
P.S. I'm on E9 - not sure if it matters.
I was just thinking about this same question a few days ago. I usually use the rule decision try again, because if I understand he would check to see if the answer was Yes every hour and if yes go this person right then. If the answer is Yes, a day after the sending of the email they would pass to the next step instead of having to wait 7 days.
However I just has a new society where they still use the waiting step not the retry. It's a good question, I think that the best answer would be that if you want people to move as quickly as possible use try again and if you need to wait 7 days of calendar between the emails use the waiting stage.
-
Hello
I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
If I open the calculator several times (about 65 times), I have the same result.
Sometimes, I get no error message, but the application does not open.Someone knows why?
Thank you
Hello
You did the chnages on computer before this problem?
I suggest you go through the steps of the following atrticle.
"Not enough memory" error message appears when you have a large number of programs running.
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows. -
My desktop icons and toolbar and start programs disappeered after getting a virus.
My desktop icons and toolbar and start programs disappeered after getting a virus.
I deleted the virus.
No idea how to get back them?
Hi Matt,Some infections of virus/malware will hide all files and shortcuts on your computer. To make your files visible again, download display on your desktop.Once downloaded, double-click display and let it run. It removes the attribute hidden on all files and attempt to restore items in quick launch and Start Menu to their location.If you think that your computer is still infected, try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
Action / insert an extra step after stop
Hi guys,.
Any way to add an extra step after the Action has been registered and collapsed? Sometimes I save and save and know that I forgot to add something. I did a search but found none so far.
Thanks for any help or suggestion.
See you soon,.
SEBS
To add a step in an action simply click on the step above where you want the step and click on save, save the step, and then click on stop. The stage (or stages) will be added to the action. Note that you need to make sure that the conditions of the image are appropriate to get the newly stored procedure... For examply, if you want to save a step in pen, you will need to make sure that there is an active selection of pen. Otherwise, you will get an error.
-
Anyone else having programs crash after installation of Sierra?
I just installed Sierra on an iMac mid-2012. A lot of programs crash after installing Sierra, of Apple's native applications. Anyone else having similar problems? All possible solutions?
Thank you
Hi guitarno,
Thanks for the upgrade of your iMac to macOS Sierra! I understand that your Mac works more slowly as it did before the upgrade. You can try to start up your Mac in Mode without failure.
What is safe mode?
Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
Check your startup disk and attempts to fix problems if necessary directory
Loads needed kernel extensions only
Prevents elements start and the login items open automatically
Disables the user installed fonts
Delete font caches, hiding the kernel and other files of the system cache
Together, these changes can help resolve or isolate issues related to your startup disk.Try safe mode if your Mac does not end commissioning
After successfully started upward in safe mode, check to see if you have any login or startup items. Here are the apps that run as soon as you turn on your Mac and continue to run in the background that can slow down the performance of your Mac.
macOS Sierra: If you think you have incompatible connection points
You can also check that your Mac has enough disk space for the smooth Sierra BONES. Under macOS Sierra, it's easier than ever to free disk space! Take a look at this link. Information System for Mac: optimization of the storage on your Mac
Once these tasks are completed, restart your Mac normally and then test the performance. I'm sure you'll see a difference. Please use the Apple Support communities to post your question.
Good day.
-
I'm running on an issue where my program crashes after 25 events were recorded from a cluster. I created a cluster 32 Boolean controls, and when a control is pressed it triggers an event in my structure of the event. It doesn't matter which of the 32 controls I click, after exactly 25 button presses, that the program crashes. Does anyone have ideas, which could be the cause?
It would really help if you could do a simplified demonstration.
In the zone configuration of the event, is there something interesting (front of the lock, limit maximum instances, etc.)
You set a maximum queue size?
-
6 Lightroom, it crashes the opening program et after little time an error occurs.
It remains stuck with the initialization screen et then copmare an error message with the following details:Description:
If e verificato a problema che impedisce al programma di Windows con return.
Firma problema:
Nome evento problema: AppHangB1
Application name: lightroom.exe
Application version: 6.0.0.10
Application timestamp: 5523190c
Firma di block: fd75
Circuit type: 0
SO version: 6.1.7601.2.1.0.256.48
Locali impostazioni ID: 1040
Firma aggiuntiva block 1: fd754a3ab31baaadc3b097f6ba66701c
Firma block aggiuntiva 2: da65
Firma aggiuntiva block 3: da65a7b794d37166700564ce61532b85
Firma aggiuntiva block 4: fd75
Firma aggiuntiva block 5: fd754a3ab31baaadc3b097f6ba66701c
Firma aggiuntiva block 6: da65
Firma block aggiuntiva 7: da65a7b794d37166700564ce61532b85
Leggere informativa sulla privacy online:
http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0410
SE informativa sulla privacy online no e disponibile, quella leggere offline:
Q:\Windows\system32\it-IT\erofflps.txt
anyone can help me?
You seem to have 6.0 installed - you updated to 6.3? You can download it here: keeping up-to-date for Lightroom
-
I bought Adobe CC through my University, but once I started to install update 2015 yesterday, he said that I only had trials for programs like After Effects and Speedgrade. I am unable to redeem a subscription, because it was a continuous single thing of educational personnel. What should I do?
Thank you for your help. I spoke with one of your customer service representatives, and the question seems to have been based on accounts. I think it is resolved.
-
What is the next step after mounting or triming a video?
What type of file format must be registered and what to do after that?
Hi Jeff,
I use the file-> export-> video rendering.
If you don't want the Explorer for the first time, the default value is OK for a nice video.
Stefanie
-
How many computers can I download programs on after its purchase?
Is there a limit to how many computers can I download programs on after having bought the cloud service?
Like any siftware Adobe, the limit is two nmachines. Here is a link to a forum on this subject postiing:
-
I am creating a program and I'm using the rule of decision "Clicked through specific E-mail Web site". When the "Mobile view" or "Manage preferences" link in the email is clicked, is the part of the clicks that will use the decision rule?
Check the HTML source code on the header and/or footer assigned to the email. It will look like this if it has the redirector link instead of a direct link with the object.
Eloqua redirect link:
http://now.Eloqua.com/e/er.aspx?s=xxxx&lid=1055&ELQ= recipientid
Direct links to other objects are the following (if you use the provided OEM modules)...
Read online:
http://now.Eloqua.com/es.asp?s=xxxx&e=53447&ELQ= recipientid
Global unsubscribe:
http://app.EN25.com/e/u.aspx?s=xxxx&ELQ= recipientid
Management of the subscription center
http://now.Eloqua.com/e/SL.aspx?&s=xxxx&ELQ= recipientid
Read on mobile
I don't have it. Anyone want to post it for me? ;-)
-
Process of conditional based on IR-link after validation step
Hello
I am trying to find a solution to the following situation:
A PL/SQL-Process must be released if:
-the value of a page element is not null
and
-l' user has clicked on a link to the column in an interactive report (the link is "conditional")
My starting situation:
_1. DB-Configuration: _
_2. ApEx-Configuration: _CREATE TABLE TABLE1 ( NR NUMBER , SHOW_BUTTON CHAR ); INSERT INTO TABLE1 (NR, SHOW_BUTTON) VALUES (1, 'Y'); INSERT INTO TABLE1 (NR, SHOW_BUTTON) VALUES (2, 'N'); INSERT INTO TABLE1 (NR, SHOW_BUTTON) VALUES (3, 'Y');
Interactive report with the following region source:
The link should appear only if the value in the column SHOW_BUTTON is equal to "Y".SELECT DECODE(SHOW_BUTTON, 'Y', '<img src="#WORKSPACE_IMAGES#OK.png" alt="PushMe">', NULL) "E" , NR FROM TABLE1
The column 'E' format is set to column report Standard, with a branch to the page itself.
View details and the search bar in the report interactive is disabled.
Furthermore, I placed an element on the page that is displayed below the text box.
What must happen now, if the cklicks of the user on the link:
1. the textarea element must be validated; must not be null
2. If the textarea element is not null, the SQL/PL-Process must be started
I tried several ways, including javascript, but I can't find the right way to make it work.
Any suggestions?
Thank you very much!
André
Database version:
Oracle Database 10 g Release 10.2.0.5.0 - 64 bit Production
PL/SQL Release 10.2.0.5.0 - Production
CORE Production 10.2.0.5.0
AMT for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
ApEx version:
4.0.2.00.07
Published by: seggione on May 7, 2013 10:37Hello
For this you don't have to do any complex changes(Dynamic actions) as I had mentioned previously.
Simply change your column to link to send the page rather than redirect to the same page.
either change the link in the column and value
Target URL
URL javascript:apex.submit ('MYREQUEST');And modify your process plsql to erase the value of P1_TEXTAREA
and disable/remove the dynamic action because it is no longer necessary
-
Program crashes after a few seconds every time I start it.
A few seconds after I opened the Thunderbird program freezes. I have to close it and Windows gives the usual "program not responding" WARNING when I do. I don't get a crash report. I tried safe mode, but it does not help.
I run it on a computer, Windows 8.
Thank you
Hello
Some Thunderbird problems can be solved by make a clean reinstall. This means that you remove the Program Files of Thunderbird then reinstall Thunderbird. Please follow these steps:
- Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the file to install it on your computer.
- Once the download is complete, close all windows in Thunderbird (click on Exit/Quit the menu button on the right).
- Windows:
- C:\Program Files\Mozilla Thunderbird\
- C:\Program Files (x 86) \Mozilla Thunderbird\
- Mac: Remove Thunderbird in the Applications folder.
- Linux: If you installed Thunderbird with the distribution-based package manager, you must use the same way to uninstall: see Install Thunderbird on Linux. If you have downloaded and installed the binary package of the Thunderbird Download Page, simply remove the thunderbird folder in your home directory.
- Windows:
- Now, go ahead and reinstall Thunderbird:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Thunderbird after you click the Finish button.
WARNING: Uninstaller or the use of Thunderbird and not run a third remover as part of this process, because who could permanently delete your Thunderbird data, including but not limited to, extensions, email, personal settings and the saved passwords. These can be recovered, unless they have been backed up on an external device!
Please report back to see if this helped you!
Thank you.
-
Why my recovery disk creation program cancels after 50% of creating files
I'm doing a recovery disc for my Compaq laptop. It has Vista OS. I use the recovery disc creation program. The program starts and shows that it is creating files. When the indicator progress says 50%, the program seems to stop, and after a few minutes, I get a message say that the process is canceled. What can I do to create a recovery disk?
Hello
This recovery process belongs to HP Compaq, not Microsoft.
They are the ones to ask about problems when you attempt to make the recovery of the disks.
http://WWW8.HP.com/us/en/contact-HP/contact.html
Or you could ask in their Forums:
Here is the HP Compaq information on how to make recovery disks:
Create a set of recovery disks operating systemHP Recovery Manager to create a personal set of recovery disks. When you select the recovery disc creation process, the HP Recovery Manager examines the PC and determines how many virgins DVD discs will be necessary. According to the model, you will need up to ten or more CD - R or CD-R, or up to three discs DVD-R or DVD + R. The creation process can take up to an hour or more. Do not interrupt the process of creation.CAUTION: disks must be CD - R, DVD - R or DVD + r using No CD-R/W or DVD - R/W drives read/write because the creation process will fail.Create a set of recovery disks operating system by following the steps below.- Click Start and enter the recovery in the field of research. Select Recovery Manager in the list to open the HP Recovery Manager window. Allow the action to proceed, if you are prompted.Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted.
- Click Advanced options , the creation of recovery disks , and then click Next .The program appears to pause for about ten minutes while it examines the computer and calculates how many DVD-R or DVD + R discs are required.
- When you are prompted, put a blank disc in the optical disc drive and follow the on-screen instructions to create the recovery disks.NOTE: If a disc is inserted before the disc insert prompt is displayed, and the Recovery Manager does not recognize the new disk, press OK to clear the error message, then eject and reinsert the blank disc. In case this happens, without loss of data occurs, or damage the computer. It just "stops" the process of recovery that the Recovery Manager to identify the blank disc.
After all, the recovery disks are created, label the disks and store them in a safe place. If the recovery disks fail when creating or damaged, you can order replacement of HP recovery disks.See you soon.
Maybe you are looking for
-
Firefox 10.0.1 think the last plugin Flash is too old, it disables
I have the last flash plugin installed from adobe Web site. Flash does not work. It does not appear on my list of plug-ins installed. Check all my plug-ins for updates, firefox tells me "for your security, Firefox has disabled your outdated version o
-
HP Mini 110: Reset password BIOS HP 110
Hello guys,. I have an old HP Mini 110 and somehow, it was locked by password BIOS. I can't get through the screen. Can anyone help me please with the password? Thanks in advance! My S/N CNU9292K09.
-
How to launch the Documents To Go by program
Hello I am newbie on the development of BB. In my application, I want to display the document user type .txt, .pdf, .doc, etc. "I want to open the document by using App" Documents To Go ", which I suppose is default in each device BB (since OS 6). (P
-
34 error occurs in the installation
Failed to install on my computer due to the error 34 CC Photoshop (trial version). How can I deal with this bug?
-
I been using CC and had no problem. Still had the link 5.7 on my desktop and accidentally selected. Make a collection of hundreds of photos of several years of photos. I want to keep in CC and get rid of 5.7, no way to do it?