Conditional statement with calendar control
Hello
I need to set a condition on a calendar field (anticipated date) that requires users to choose only certain date in the calendar. Otherwise, it will give them a message and clear the calendar. Also, I need to set up another condition with "in between" but I do not know how to configure them.
THANK YOU VERY MUCH FOR YOUR HELP!
J
For the first, you could do (in formcalc):
If (Date2Num ($.formattedValue, "DD/MM/YY") < 41123="" and="" date2num($.formattedvalue,="" "dd/mm/yy")=""> > <> 0) then
xfa.host.messageBox ("your arrival date cannot be before the 08/03/12", "My message", 1).
$ = ""
endif
You must make sure to only set the JJ/MM/AA entry model or what you use in the code above so that it corresponds.
For the second, you could do:
If (Date2Num ($.formattedValue, "DD/MM/YY") 41130 > and Date2Num ($.formattedValue, "DD/MM/YY") <> 0) then
xfa.host.messageBox ("your departure date cannot be after 12/10/08", "My message", 1).
$ = ""
endif
Tags: Adobe LiveCycle
Similar Questions
-
State Machine with PID control
Hi, I currently have a problem with my state machine, I control two cylinders double effect in sequence that works very well. However, there is one point I need to increase the pressure in the cylinder and to maintain this pressure through the sequence of State machine, however when the state machine transitions to the next indicate the PID controller resets, how can I solve this problem? Everything in is also allowed to apply the pressure in the cylinder another (same node IO accessed).
Thank you I joined my project in a WinZip file, then it will have to be extracted. The two main VI to watch is 'Park Brake FPGA VI New' and 'park brake host VI update 2 "(new)
Thank you.
Nevermind I solved the problem with a parallel loop.
-
Coding of your Web site is Compatible with IE by using a conditional statement?
Hi all
I'm really bad make my site compatible with Internet Explorer. I know, it does not support the element ' position: fixed ' (which I used), but I heard there was a way around this by inserting a "conditional statement". But I'm really, really difficult to code correctly. Where exactly in the HTML code I place it, and how does the browser know what layer/div, it is assigned to?
Here is the code that defines the changes in IE. As it is, it actually doesn't work properly... it just removes all items on the page... so I know that I made a mistake somewhere.
<!-[if IE 6] >
position: absolute;
top: 20px;
left: 20px;
<! [endif]-->
I don't always know where place them, and how to ensure IE knows what is the code. Can someone help a newbie? I'm way too deep! Www.ameliaharris.110mb.com/ of the Web site if it is of no use.
Thanks in advance.
I had a peek at the CSS on your site, and it uses some of the strangest buildings I've ever seen. For example:
unicode-bidi:bidi-override; direction:rtl;
What on earth that is all about?
Again, to answer your question, what you are doing wrong with the IE conditional comment, is that it is incomplete. The conditional comment must contain a block of complete style with the regular style rules:
Because you want to override what is in your style sheet, it should come the
of the embedded document after links to CSS and external style sheets. -
How to use variables in conjunction with a conditional statement
How can I convert this to binding of variables that I also have a conditional statement which stretches from the place where clausev_sql:= 'SELECT /* * */ trans_id' || 'FROM NDW_trans '|| 'WHERE cable =TRIM(LEADING 0 FROM ' || i_Cab || ')' || 'AND ' || i_Pair || 'BETWEEN low and highr' || 'AND termsysid =' || i_termsysid || 'AND provisionstatus= ' || 3 /* find what the constant is for inservice*/ ; IF i_Bill IS NOT NULL THEN v_sql := v_sql || 'AND CO_Clli = i_Bill'; END IF; BEGIN EXECUTE IMMEDIATE v_sql INTO o_trans_id_list;
Try this
v_sql:= 'SELECT /* * */ trans_id FROM NDW_trans WHERE cable =TRIM(LEADING 0 FROM :i_Cab AND :i_Pair BETWEEN low and highr AND termsysid = :i_termsysid AND provisionstatus=3 ' /* find what the constant is for inservice*/ ; IF i_Bill IS NOT NULL THEN v_sql := v_sql || 'AND CO_Clli = :i_Bill'; END IF; BEGIN EXECUTE IMMEDIATE v_sql INTO o_trans_id_list USING i_Cab, i_Pair, i_termsysid, i_Bill ;
HTH
SS -
Operation of State activated a control?
Is there a way (how) to change the enabled state of a control programmatically?
I would like to 'Gray out' controls that are inactive the user under certain conditions and make available when they are active. This requires to dynamically change the State of the control.
TE88,
Attached is a screenshot on how to set properties on the controls and indicators. You should use VI-server classes.
HTH
--
Joachim -
Case statement with a select &; date in
Hello everyone,
This is my first discussion, so please bare with me.
I am trying to write a case statement with a select statement that compares the dates.
When I write an instruction box with a select statement in it compares everything but dates it works fine. Once the date is there, he collapses.
Here is a super simple example of what I'm trying to do, "b.in_serv_dt" is a date
Select unit_no,
case when ((sélectionnez b.in_serv_dt de b unit_dept_comp_main où a.unit_id = b.unit_id et b.in_serv_dt) > = 1 January 2012 "") then "everybody wins."
When ((sélectionnez b.in_serv_dt dans l'unit_dept_comp_main b où a.unit_id = b.unit_id et b.in_serv_dt) < = 1 January 2012 "") then "Nobody wins".
end
of ottawa_unitmain_v one
Any help would be greatly appreciated
Thank you very much
Hello
your statement of formatting:
Select unit_no
case when ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
and b.in_serv_dt
") > = JANUARY 1, 2012"
) and then "everybody wins."
When ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
and b.in_serv_dt
)<=>=>
) and then "no winner".
end
of ottawa_unitmain_v oneI see "partial conditions": <... and="" b.in_serv_dt="">> that have no meaning.
I guess it's a kind of "typo" and I ignore them.
If the statement is:
Select unit_no
case when ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
") > = JANUARY 1, 2012"
) and then "everybody wins."
When ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
)<=>=>
) and then "no winner".
end
of ottawa_unitmain_v oneI guess that the "b select" retrieve one line, through the design of database (forced...)
As already written: be careful with data types: avoid "implicit conversions" (when you compare different data types, Oracle has convert the data type of the other side, a side example: "mystring = mynumber" is transformed into 'TO_NUMBER (mystring) = mynumber', or 'mydate = mystring' translates mydate = TO_DATE (mystring,
) ")
Even better: use explicit conversions, use explicit formats when necessary.
Best: use no conversion on columns from the constants, but use the correct data type for the constant.With this in mind:
Select unit_no
case when ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
) > DATE = ' 2012-01-01'
) and then "everybody wins."
When ((select b.in_serv_dt
of unit_dept_comp_main b
where a.unit_id = b.unit_id
)<= date="">=>
) and then "no winner".
end
of ottawa_unitmain_v one
But note that b.in_serv_dt EQUAL to 1 January 2012 (at 00:00:00) is OK for both WHEN the conditions; then the a "win."Now: the subselect statement is identical in the 2 options of the case... You could work differently: (I add the "ELSE" in case one line as NULL in_serv_dt;) I guess that an INNER JOIN is OK, maybe you need a LEFT OUTER JOIN (if some lines of A have no corresponding row in B)
SELECT a.unit_no
, CASE WHEN b.in_serv_dt > = DATE '' 2012-01-01
THEN "everyone wins"
WHEN b.in_serv_dt< date="">
While "Nobody wins".
ELSE ' who knows... ". »
END who_wins
Of ottawa_unitmain_v one
INNER JOIN unit_dept_comp_main b
ON a.unit_id = b.unit_id
;Best regards
Bruno Vroman
-
Hello!
I want to display different content in the sidebar of a page 2 column template.
I would like to create a template to use for a group of pages. According to the name of the page, I want to view the contents of specific pages in the sidebar.
I thought that I would need to use conditional statements, but I don't know how to write this.
The content of the different sidebar would be placed in content holders.
Please help me understand this.
Very much appreciated.
Marian
Easy with liquids conditional, but probably easier instructions with just named pages and content holders. Here's a solution:
Create your sidebar provides with names like 'Sidebar-talk', "Sidebar-Home", etc.. The portion after the "-" must be the name of the page where the content will appear.
Insert in your model, where will be the content of the sidebar:
{module_contentholder,name="Sidebar-{module_pagename}"}
-
Under regions and conditional statements
Greetings. Having a problem with conditional statements and subregions. With the help of apex 4.2
I have a region (mutations) that has several items and a few buttons (button A, button B, etc.). I need to display conditionally button A. I have a sub region (People), which is a report of people deployed. I need a button to display the area of deployments, if there is no people in the report (People_ID is null) then the button will not appear. I tried to use a conditional, but I am not having any luck. Help, please. Thanks in advance.NewApexCoder wrote:
I just tried to use a conditional buttonCondition Type: Point value / expression column 1 is NULL
Expression 1: PEOPLE_IDThis doesn't seem to work for me.
No, it does not. (The inclusion of 'column' in this type of condition is inadequately documented. A "column" name only are referenced by such a condition, after presentation of a form in a table.)
Use a Exists (SQL query returns at least one row) condition, based on the query in the subregion to report.
-
Conditional region with functions, does not
Oracle EBS Bi Publisher standard (customer statement) report, using speaking
I am creating a conditional region with no luck.
<? substr (INVOICE_NUMBER, 1, 1) xdofx:If. decode (AMOUNT_DUE, ", 'NOPRINT', AMOUNT_DUE)! = "3NOPRINT"? >
I created a field using all this substr (INVOICE_NUMBER, 1, 1) | Decode(AMOUNT_DUE,'','NOPRINT',AMOUNT_DUE) to confirm that the value is 3NOPRINT, but again the lines appear.
Any ideas?
Thank you
-jYou can try the code below
-
Trigger does not include conditional predicates with FUSION
Hello world
I am facing a problem while using the conditional trigger with predicate. The trigger event is a MERGE statement.
When the fusion (update and insert the two) is executed, trigger is fired, however the results of predicate condition false.
For example -.
create table merge_test (col1, col2 number number);
create or replace trigger merge_test_tr_stat
After INSERT or UPDATE or DELETE on merge_test
Start
If inserting or updating or deleting then
dbms_output.put_line ('conditional predicates work');
on the other
dbms_output.put_line ("' conditional predicates does not");
end if;
end;
Please run set out below:
Set serveroutput on;
insert into merge_test values (1,1);
Set serveroutput on;
merge into mt merge_test using tab (select 1 col1 of double)
on (mt.col1 = tab.col1)
When matched then
update the value of col2 = 2
When not matched then
Insert values (1,1);
After you run the merge statement, should result of conditional predicates works but we get conditional predicate does not work.
Please suggest what to do.
Thanks in advance.
Kind regards
RiddhishaIts a bug that has been fixed at 11.2 and more
Bug 9865211 INSERTION / updates always false in the SQL MERGE triggers
-
Conditional statement to improve the functions of navigation bar
Question of AS2:
I have created a navigation bar of four buttons with the normal state in box 1 and place the cursor in the frame of 10, 20, 30 and 40, States.
Hover States are made by adding a mask on each button to reveal a layer of color differetly on frame 10, 20, 30 and 40
I have scripted buttons like this:
on (rollover) {gotoAndPlay (10);}
}
(deployment) {gotoAndStop (1);}
}
(press) {gotoAndPlay (1);}
}
on (release) {gotoAndPlay (9)}
}
On the four frameworks there is also an action that says:
Stop();
to import flash.external.ExternalInterface;
{btn1.onRelease = Function ()}
ExternalInterface.call("saveglobalscore",score) ("f1");
}
It all works well. The button triggers a javascript function on the page.
Request:
Can I do the buttons stay in addition to their States when a button is clicked, so it serves as a clear marker that the viewer of the page selected and seeks to?
Page loading on the release, but as soon as the pointer leaves the button, the command deployment on-site the playhead to frame 1 (with the normal state)
(1) is the following:
Put a conditional statement to say frame 1:
If the read head came to frame 10 then go to section 10 and stop.
If the read head came to frame 20, then go to section 20 and stop.
If the read head came to frame 30 then go to frame 30 and stop.
If the read head came to frame 40 then go to the frame of 40 and stop.
Another thing: stay on the frame 1.
?
(2) or is there another solution that I have not thought?
Often, it would be useful to be able to follow where the read head just left for example with scroll on the side and other advanced layouts.
Is this possible and if so, how?
Thank you in advance.
ggaarde
var mcA:Array = [mc1, mc2, mc3,...];
for (var i: int = 0; i<>
.Ivar mcA [i] = i;
mcA [i] .buttonMode = true;
mcA [i] .addEventListener (MouseEvent.MOUSE_OVER, overF);
mcA [i] .addEventListener (MouseEvent.MOUSE_OUT, outF);
mcA [i] .addEventListener (MouseEvent.CLICK, clickF);
}
function overF(e:MouseEvent):void {}
MovieClip (e.currentTarget) .gotoAndStop ("over");
}
function outF(e:MouseEvent):void {}
{if (MovieClip (e.currentTarget) .lastClicked)}
MovieClip (e.currentTarget) .gotoAndStop ("clicked");
} else {}
MovieClip (e.currentTarget) .gotoAndStop ("up");
}
}
function clickF(e:MouseEvent):void {}
for (var i: int = 0; i<>{if (mcA [i]. Clicked)}
mcA [i] .gotoAndStop ("up");
}
}
MovieClip (e.currentTarget) .gotoAndStop ("clicked");
do something else. has clicked the button movieclip MovieClip (e.currentTarget) .ivar th
}
-
Conditional statement advanced interaction checking if a variable is odd/even?
Hello
I was wondering if it is possible to have a conditional statement that checks if a variable is even or odd? I am using Captivate 5.
Here's what I would do, and I know that I could do the same thing with the two sepaparate buttons, but I am curious to know if it is possible to do it with a button only.
What I'm trying to do, is to give learners the ability to display some documents as a resource on their screen while they are listening for an example of an interaction with the customer. During this interaction some forms have to be filled, and I want learners to be able to display a before and after of the completed form, if they would like to see it.
The easy way to build that according to me is to have a single button that would make the visible resource and the other button that hides the resource. I tried it and it works like a charm using standard measures.
Since there are several resources that I want to put available for learners, with two buttons for each resource can clutter the slide a little, so I thought I'd try if I could create the same function using a button with a tip action.
Whenever the learner clicks on the button for a resource, the variable associated with the resource is increased by 1. I would then have a conditional statement, saying: If the variable is odd-> see the resource, if the variable is same-> hide the resource.
I can't find the option in the advanced actions to compare if a variable is even or odd. I can only find how to compare to a literal or another variable.
Hello
May I suggest another approach instead of odd/even?
I would build a conditional action with 2 decisions. In the first decision, it of really a standard action (use IF 1 = 1, while it is still running), use this statement:
Expression v_one = 1 - v_one
v_one is the variable user for this button. It will always pass the value of this variable between 1 and 0. If the variable has no value assigned when set, first time user clicks it will get a value of 1, the second time the value 0.
Second decision will be your cheque to condition:
IF v_one = 1
THEN hide resources
ELSE to see the resource
I hope you get the idea?
Lilybiri
-
I want to hide a DIV element using the IE conditional statement. Is this possible?
Hi all
IE has trouble reading my video, I just want to insert a conditional statement saying Internet Explorer to hide the video. Is this possible and if so, how? Thank you very much in advance for any help.
Here is the URL (http://austinlindsay.com/iplayers.html) and the code of the div if it's any help (I know it is a little rough, sorry!):
< div id = "iplayers_demonstration" > iPlayers video demonstration
< object classid = "' clsid:02BF25D5 - 8 c 17 - 4B 23 - BC80 - D3488ABDDC6B" codebase =" " http://www.Apple.com/qtactivex/qtplugin.cab "height ="431"width ="791"scale ="aspect"> "
< param name = "src" value = "video/iplayers_demonstration.mp4" >
< param name = 'type' value = "video/quicktime" height = "431" width = "791" scale = "aspect" >
< embed src = "video/iplayers_demonstration.mp4" height = "432" width = "738" scale = "aspect" autoplay = "false" type = "video/quicktime" pluginspage =" " http://www.Apple.com/QuickTime/Download/ "> "
< / object >
< / div >If it is not possible, my only solution is to solve the following problem, so if anyone has any suggestions, please let me know. Thank you very much
Problem:
I joined several video on my site and their rescheduled so that they fit inside my container. It works fine in Firefox, Safari, and IE8, I'm told. But there is a serious problems with IE7, where videos that play are cropped. This is probably caused by when I have rescaled the video, and for some reason, IE not resized the real images, just the viewing area. It is also, does not recognize "autoplay ="false"because that videos play automatically when the page is loaded.
But it does not appear when you test it in IE. No idea why?
Because you have told IE to stay away!