Conferecing design of a driver and three vTS 8-core system

Similar Questions

• Plug any USB external drive and this is repeated in system.log

  Model name: iMac

  Model identifier: iMac17, 1

  Processor name: Intel Core i7

  Processor speed: 4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 32 GB

  Boot ROM version: IM171.0105.B09

  Version of the SCM (System): 2.34f2

  Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e64a80, 3, 0)

  Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224d1bbe0, 3, 0)

  Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f28490, 3, 0)

  Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224c2aa30, 3, 0)

  Sep 21 08:29:03 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921af0, 3, 0)

  Sep 21 08:29:04 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe22684a310, 3, 0)

  Sep 21 08:29:07 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a39a70, 3, 0)

  Sep 21 08:29:10 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a442b0, 3, 0)

  Sep 21 08:29:13 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe2268479f0, 3, 0)

  Sep 21 08:29:16 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e48df0, 3, 0)

  Sep 21 08:29:19 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226828e60, 3, 0)

  Sep 21 08:29:22 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f2a300, 3, 0)

  Sep 21 08:29:25 Parker-6 logd [70]: _handle_cache_delete_with_urgency (0x7fe224f287b0, 3, 0)

  Sep 21 08:29:28 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226848ad0, 3, 0)

  Sep 21 08:29:31 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a53cd0, 3, 0)

  Sep 21 08:29:34 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224d261d0, 3, 0)

  Sep 21 08:29:37 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226843e60, 3, 0)

  Sep 21 08:29:40 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224e4ae10, 3, 0)

  Sep 21 08:29:52 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe224f25080, 3, 0)

  Sep 21 08:29:52 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  Sep 21 08:29:52 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  Sep 21 08:29:52 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  Sep 21 08:29:52 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  Sep 21 08:29:55 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921af0, 3, 0)

  Sep 21 08:29:55 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  Sep 21 08:29:55 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  Sep 21 08:29:55 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  Sep 21 08:29:55 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  Sep 21 08:29:58 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a4cf30, 3, 0)

  Sep 21 08:29:58 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  Sep 21 08:29:58 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  Sep 21 08:29:58 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  Sep 21 08:29:58 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  21 sep 08:30:01 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a53c70, 3, 0)

  21 sep 08:30:01 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  21 sep 08:30:01 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  21 sep 08:30:01 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  21 sep 08:30:01 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  21 sep 08:30:04 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226b33af0, 3, 0)

  21 sep 08:30:04 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  21 sep 08:30:04 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  21 sep 08:30:04 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  21 sep 08:30:04 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  21 sep 08:30:07 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226a57da0, 3, 0)

  21 sep 08:30:07 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  21 sep 08:30:07 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  21 sep 08:30:07 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  21 sep 08:30:07 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  21 sep 08:30:10 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe226921d50, 3, 0)

  21 sep 08:30:10 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  21 sep 08:30:10 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  21 sep 08:30:10 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  21 sep 08:30:10 logd Parker-6 [70]: 0 bytes of purgeable space from files uuidtext

  21 sep 08:30:13 logd Parker-6 [70]: _handle_cache_delete_with_urgency (0x7fe22684a310, 3, 0)

  21 sep 08:30:13 logd Parker-6 [70]: _volume_contains_cached_data (is/private/var/db/diagnostics/en /)-YES

  21 sep 08:30:13 logd Parker-6 [70]: 72375512 bytes purgeable space from log files

  21 sep 08:30:13 logd Parker-6 [70]: _purge_uuidtext runs only to emergency 0 (3)

  Yes, same here. Retina MBP 13 ". And it seems only to get a set of entries for each USB drive connected. I have only USB 2.0 drives if that helps. Very annoying. And confusing. I hope that macOS is not cached the contents of USB drives.

• Get several errors in the hard drive and the slowness of the system XP

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  * original title - mistakes, mistakes, mistakes and Everwear *.

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

  How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

  If you really get a lot of the drive read errors, the drive is defective and must be replaced.

  But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

• WMP on windows xp cannot burn message connect device drive and reboot, cdr is in system have try all help...

  I have wmp reenstalled, removed it.windows cdr and install sees it is in wmp I can rip from it may not brown him he says install device and start the player

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appeara

  Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appearance. Thank you.

  Hi GANESHKUMARAPILLAI CHRYSTELLE,.

  Here is a link for color management workflows in Illustrator.

  It is best to place the image instead of paste into Illustrator. When you paste the images they are in RGB color format. Make sure your document is a RGB file

  Click on these links for more information.

  Understand the workflow of the CC of individual course Illustrator color management: Advanced

  Creative Suite * keeping colors consistent

  Implement the print color management workflow. Illustrator, InDesign, Photoshop

  Concerning

  Scott

• DV6409ca No. Wireless and three device Base system in the Device Manager

  I have a DV6409ca SNcnf73202t7 and ran Windows XP on it flawlessly for about a year.

  Last night I asked my laptop and this morning I woke up to the orange light of death on the front of the computer for the wireless and three newspapers of device Base system in the Device Manager. They run:

  Bus PCI 7, device 5, function 3

  Bus PCI 7, device 5, function 2

  Bus PCI 7, device 5, function 4

  I tried making restoration of the system, the removal of the chipset drivers / wireless/network and reinstall in safe mode and the search for solutions to many other people tried to make their wireless work.

  Any help would be appreciated. Thank you

  Hello:

  You must download and install the Ricoh 5-in-1 card reader driver support for your laptop and driver page.

  Go to Device Manager and expand network adapters.

  Is the model of your wireless poster card he or she has completely disappeared from the Device Manager, does not come under the section of the network cards, or in the General list of devices such as a network controller?

  If she disappeared from the view, 99% chance the connection from the motherboard to the card slot plugs into is fried.

  This is a very common problem with the dv6000/dv9000 models.

• With the help of driver and comparator on cards PXI-6552 to test DUT Tristate

  A functiona test, I need to check that my DUT outputs are tristate at some point in time.

  Is it possible to use the generation pin electronics driver to drive a voltage of mid range (say 1.6V) and the electronic pin Acquisition window comparator search the tension considerably away from that level (Vil = 1.4V and HIV = 1.8V)?

  So far, the problem is that the WDT waveform format allows a unique nickname by pine and there is no alias indicating drive and compare the two.

  Maybe I have to set some attributes HSDIO who turn manually the drivers and then look for invalid data (between vile and HIV) during cycles when the DAE is tristate?

  Hi Brian,.

  Unfortunatelly the 6552 does not support the States 'lead and check '. The PIN every time he compares goes in three States. Perhaps the best solution would be to get the acquired data and to verify the State of the PIN to this particular sample. In this case, you define your waveform to drive a value and the acquisition will acquire what you are driving (or what's left of the signal). This can be problematic if you run complex scripts, because it is difficult to understand where in the waveforma which is particular State, but electrically measure is correct.

  Let me know if you have any other questions about this work around.

  Kind regards

  Juan Carlos

• SanDisk Extreme USB Flash Drive and SMART failure

  I just got 3 64 GB SanDisk Extreme USB Flash Drives and all three show SMART failures to reassign bad sectors. I struggle to believe that all three could be bad on first use. I use a program on a Mac (SoftRAID(4)) to certify all drives prior to use, including the SD cards and USB keys. I've never seen a failure so far.

  Readers see the successful certification but present a SMART failure.

  What is a disk problem or a SMART question or what?

  Thank you

  Lief

  I agree that it is unlikely to have failed on the first use. Most likely, it is a problem with the SMART attributes. IIRC sandisk can't CHIP for this product so it formats without error, and data can be copied onto the discs with success, I wouldn't worry too much on this subject.

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Design the necessary driver for EHR 300 digital camera

  Low load design the necessary driver for above camera

  Go to the manufacturer.  They have created the product, they supported (or not) the product.  No matter what operating system you are running, etc. - If they can't stand on the said OS - almost anything else you can find to make it work is a kludge.

  I have not yet found a camera with the model number you gave.  Maybe I've found someone trading some old webcam/mic has put online - but I found for most sanders and a stereo?

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Clean hard drive and install Windows 7.

  I have a packard Bell desktop computer that was originally installed Windows Vista. When I bought it, I downloaded and created via the site of Packard Bell recovery disks. But last year, when I tried to recover my computer with disks that I realized my recovery disks did not work properly and I couldn't get my computer back. So I decided to buy Windows 7 instead of buying Packard Bell recovery disks. I was using my computer with Windows 7 until today. Today when I tried to wipe my hard drive and reinstall the software I could not install them because the error message said that there was not enough memory in the assigned disk drive. How can I clean all old Windows folders and other files in order to empty the hard drive and reinstall Windows 7 software?

  Hello

  Use the Mode without fail - repeatedly take F8 as start you - run then disk cleanup

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  How to remove and delete the folder Windows.old on Vista or Windows 7
  http://www.kodyaz.com/articles/delete-Windows-old-removal.aspx

  =============================================

  If that does not free enough space then you must move data to others
  Media (such as other hard disks/partitions, CDs, DVDs or USB drives) and/or
  uninstall programs that you do not use.

  ------------------------

  It will show you how disk space is being used.

  WinDirStat - free - use to make sure you know what is too much space.
  http://WinDirStat.info/

  -Free - TreeSize tells you where precious space has gone to
  http://www.Jam-software.com/treesize_free/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  ===================================================

  Malicious software could play a role:

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!