Config system CS5 for AVCHD reviews

Similar Questions

• Config system CS4 for AVCHD/Blu-Ray reviews

  Hello
  
  
  I need some advice for a CS4 system configuration.
  
  
  I'm currently building this uncompressed SD/HD/AVCHD video editing system and creating Flash, SD, DVD, Blu - Ray.
  
  
  This builds a store local model and parts are already coming, so any change would be extras, and I'm on a budget. I know I should have posted this before, but reading contradictory reports on player config issues raised some questions and concerns.
  
  
  Here are the current specifications...
  
  
  Fan 750W Corsair ATX Power supply w / 140mm
  GlacialTech SilentBlade II 120mm case fan
  Motherboard ASUS P6T w/Triple Channel member support
  Intel Core i7 920 2.66 Ghz processor
  Startup Kingston 128 GB, SATA 300 SSD(Now V-Series) drive
  Seagate ST31500341AS 1.5 to 7200 RPM HARD drive X 2 in RAID 0 Stripe (internal)
  2 GB memory DDR3 PC3-10666 (1333 MHz) X 6 = 12 GB of RAM
  w/elemental Accelerator for nVidia Quadro FX1800 graphics card
  SuperMulti Blu - Ray LG burner blue DVD
  2 TB USB external HHD (attached via USB)
  2TD Firewire external HHD (attached via Firewire 800)
  4 pin Molex to 2 x SATA Adapter
  4 living squirrels with Hi-power hot peanuts in the hamster wheel
  Windows 7x64bit
  
  
  I use CS4 Production Premium (upsell package) for Windows.

  
  

  1. is it possible to run CS4 on a SSD drive (such as the start of the OS and the app drive)? I've heard mixed reports that CS4 plays well with the SSD.

  
  

  2. in the CS4 configuration for a project, which drive each element of project/assets should go to maximize the speed?  After seeing so many conflicting articles, I'm completely lost on disk cache vs vs backup drives media/project files.
  
  
  3 should I use RAID 0 for my discs scratch (for performance) and just manually the project for an external DRIVE to backup drive?  (I hear horror stories of these freezing in RAID drives).
  
  
  7. should I wear boxers or briefs when editing?
  
  
  
  
  Thanks in advance!

  1. Yes, you can use an SSD as a boot disk for OS & programs. No problem.

  2 & 3. Make sure that you do NOT get the 7200.11 Seagates. You SHOULD only use the 7200.12 version. I wouldn't put them in an aid0 (R), especially not with the Seagates. Instead of 1.5 to two disks, you can consider getting a 1.5 TB for support/source and two smaller disks, for projects/zero and one for exports.

  Not all P6T mobo have FW800 aboard. You may be limited to FW400. For storage (backup) external, you're better off with eSATA.

  7. no doubt the boxers. It fits better with your climbing boots and real editors always wear boots to climb when you're sitting at their editing station, just in case a mountain suddenly appears on the monitor.

  Also have a look here: http://forums.adobe.com/thread/525263?tstart=0

• How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

  My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the

  computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?

  C:\Windows\system32\config\system is one of the files that make up the system registry.  Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program.  Probably all you need to do is copy of registry backups in the Windows\system32\config folder.  A reinstall of windows may not be necessary.

  To do this is to start your machine from a free "Live Linux" thumb drive.  You can create a startup disk Ubuntu here:
     <>http://www.Ubuntu.com/download/Ubuntu/download >

  Follow the instructions of "Try me" and you should be able to copy backups of registry in place.  Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it.  After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article.  With a little patience, you can restore the registry from a backup, and be back in operation

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Startup error - file is missing or corrupt: windows\system32\config\system

  When I turn on my computer, I get the following error message:

  Windows could not start because the following gile is missing or damaged:
  Windows\System32\Config\System
  You can try to repair this file by starting Windows Setup using the original Setup CD.
  Select the rat the first screen to start repair.

  I can't solve this problem because I do not understand what to do.
  First of all, I put in the recovery CD Toshiba to installation and then I turned on the computer.
  When the Toshiba screen came on I pressed r
  Nothing happened and I was returned to the original error message

  Secondly, I tried holding down c when I turned on the computer because that's what cd said to
  The CD loaded and brought me to a screen that asked me if I had backed up all my files
  I've supported them all upward, only some, because previously there was no problem with the computer and I don't think I have it will re-start.
  I hit not and so I do not know what to do next.

  I can lose everything on my computer, otherwise I'd just re - load windows. What should I do?

  Is anyway for me to back up my documents and then reload everything, or is there a way for me to fix the entire system without erasing it?

  Thanks for your help
  Josh

  I agree with kody. You can try to fix it using windows advanced option menu. Maybe you can also try to repair Windows by using the recovery console. Problem is that this option can be used with Microsoft WXP CD facilities and not with supplied recovery media.

  http://helpdesk.its.uiowa.edu/Windows/instructions/repairinstall.htm

• Satellite A75 - config\system missing or damaged

  A month ago I successfully restored all the settings from the factory with the recovery cd for my satellite A75.
  Everything was working well until yesterday, I have received the \windows\system32\config\system missing or damaged.

  My laptop can not read the cd factory restore.
  What I do next. ?

  Another laptop home bed recovery cd I am comfortable that the CD is fine.

  Should my hard drive be replaced?

  Hello

  > Another laptop home bed recovery cd I am comfortable that the CD is fine.
  Seems the CD/DVD drive cannot handle the recovery disk I m not very well why, but you can try to copy this disc (burn on another drive) and then try to use the copied disc in order to restore the operating system.

  In many cases, this could help.

• Windows\System32\Config\System is missing or damage on Satellite 5200

  Hello

  After a system crash I have on my 5200 always the next message after startup:

  Windows could not start because the following file is missing or corrupt:
  -WINDOWS-System32-CONFIG-SYSTEM
  You can try to repair this file...

  As I wrote in various support forums, it seems that the Windows XP registry is corrupted. There is an adviser to Microsoft to fix this, but that's why I have to boot from the CD.

  I tried to change the sequence of booting (from HDD to CD) access the BIOS at startup but all the possible key (and combination) did not work, I found: F12 (which should be the right one for the 5200 series), F1, F2, DEL, C,...
  If I hold down ESC at startup I get a minimal installation but only to change the time and date.

  Are there any experience available regarding this issue? Toshiba support responded to my support request.

  Thanks in advance!

  I don't know if this will help but check this thread m:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  There is a similar case and finally the user discovered that the HARD drive has been locked.
  Very strange, but anyway. Check it out

• \Windows\system32\config\system MISSING file of repair

  I have a T400 who HAD an XP Pro operating system... Google chrome has frozen the system and I did a hard reboot and the computer had lost the configuration of the registry file. Microsoft recommends that the oem disc should be used, instead of a commercial version of the operating system. It's my DISLIKE for the purchase of a laptop computer with the OEM software, without a backup disk. If there is a problem, the manufacturer generally is going to drag you dry. I thought that this stratagem of Toshiba, but not of Lenovo. Hell, you can't even ask 'em to a disk if you are out of warranty. Stone wall. Why is it not possible to ask even an OEM Lenovo restore disk? Unless you have the security privileges, there is no way to even ask a repair disc: repair file \windows\system32\config\system MISSING this thread has addressed the topic of config file missing and from the looks of it nothing of this worked when even though the guy has abandoned and performed a clean installation and lost three days : http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-repair-corrupt-windows-system32-c... This is not the problem of problems it's despair. I have a lot of files on that drive the need for recovery. I just want to get some tips on how to record what I have and do not go the trouble to reinstall my entire library of software and then having to reinvent my lost files. Ridiculous. Where there is an article on what works?

  
  

• Widows/system32/config/system error msg

  Windows 98 2nd edition operating systems

  Error message - Windows/system32/config/system

  Telling me to put in the original CD and select r for repair, but when I do this

  nothing happens and I have the error message on my screen can someone

  Please help or advise me

  Thank you

  Goryon

  Hello

  Windows 98, Windows 98 Second edition and Windows Me (and their related components) are moving to a status not supported. Microsoft no longer provides incident support options or security updates. Microsoft does not offer an agreement of support for these products.

  http://support.Microsoft.com/ph/1139

• file missing or corrupt windows\system32\config\system

  HELP - by on the title I did: -.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

  Second part

  To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

     C:\System Volume Information is not accessible. Access is denied.

     If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

     309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
     C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
  11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

  These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

  The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

  The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

  Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

  Third part

  In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

  1. Start the Recovery Console.
  2. At the command prompt, type the following lines, pressing ENTER after you type each line:
     del c:\windows\system32\config\sam

     del c:\windows\system32\config\security

     del c:\windows\system32\config\software

     del c:\windows\system32\config\default

     del c:\windows\system32\config\system

     copy c:\windows\tmp\software c:\windows\system32\config\software

     copy c:\windows\tmp\system c:\windows\system32\config\system

  copy c:\windows\tmp\sam c:\windows\system32\config\sam

  Copy c:\windows\tmp\security c:\windows\system32\config\security

  Copy c:\windows\tmp\default c:\windows\system32\config\default

  Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

Please HELP - it took three days of messing around and actually the Ive got nowhere!

OOOOO... should start here:
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
After booting into the Recovery Console, you should be in this folder:
C:\WINDOWS
For each of your hard disk partitions, you must then run:
Chkdsk /r
For example, at the Recovery Console prompt, enter:
CHKDSK c: /r
Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
The chkdsk/r must be completed without error, you may need to run several times until it does.
Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows\System32\Config\System is corrupted or missing

  I restarted Windows XP Home edition using the software/operating system installation CD.
  I deleted everything and started again and when the Setup is finished, she has restarted.
  Then the message "windows\system32\config\system is corrupted or missing" came and said it should be repaired in the recovery console.

  Boot from the Windows XP CD and go to Recovery Console - follow this document to do http://support.microsoft.com/kb/307654

  Go to the command prompt.

  Then change to the C: by typing C: and press ENTER.

  Then type CD\SYSTEM VOLUME INFORMATION and press enter

  Then type DIR /AH and press enter (this will show you a directories even if they are hidden directories)

  This will show a few directories... one in particular starts with the name of directory being _RESTORE {there is a long series of random letters and it ends by}

  Type CD _restore {then the random set of letters, dashes and numbers in the directory list of the above command and ending by the}, and then press ENTER.

  Then type dir and press to enter.

  It will show you a bunch of directories that begin with RP - something like RP1366.

  Look at the last entry in directory PR.  If IE RP1366... then look for a couple of directory entries...

  Type CD RP1364 to some directory of restore point that is relevant to your directory entry.  Just don't do the last restore point directory - I would go back 2 or 3 directories restore point.

  Then type DIR /AD and press enter

  Should display a directory called SNAPSHOT

  Then type CD SNAPSHOT

  Then type DIR and press enter

  You should see a few files but two in particular.

  _REGISTRY_MACHINE_SYSTEM
  _REGISTRY_MACHINE_SOFTWARE

  Type COPY _REGISTRY_MACHINE_SYSTEM C:\windows\system32\config\system and press enter
  Then type COPY _REGISTRY_MACHINE_SOFTWARE c:\windows\system32\config\software and press enter

  Then restart your PC and see if you can connect.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows\System32\Config\System is corrupted or missing from WinXP Pro

  I can't start Windows Xp Pro. I get the following error message:

  Windows\System32\Config\System is corrupted or missing. How can I fix the problem?

  Hello krazykat9999,

  We get this error when you are either unable to see the registry of the system hive or he is actually corrupt.

  To remedy this, we need a Windows XP CD.  If you do not have a Windows XP CD you can borrow one from a friend for repair purposes.  If we are unable to get the CD anyway, there is another process that we can use.  Please let us know and we will send you this information as well if necessary.

  To boot into the recovery console, use the following article:
  Description of the Windows XP Recovery Console for advanced users

  Once connected, use the chkdsk command to check the disk for errors.
  This will be a certain amount of time and should not be interrupted:

  CHKDSK C:/p

  Again, this will take some time to complete.

  If this does not work, please see the following article to get back to a backup copy of the registry:
  How do I recover from a corrupted registry that prevents Windows XP startup

  Let us know if you have any questions about it.

  Best regards
  Matthew_Ha

• cannot access windows\system32\config\system file to retrieve

  Hi all, my problem was a common originally, my XP computer would not start as it says that the file \windows\system32\config\system is damaged or missing. I tried the 3 steps to recovery according to the instructions, but already in the first stage, I had the following problem: I could not copy the SYSTEM TMP file, it does not, and I get a message that the file is not accessible, even if I can see it in the CONFIG DIR. Nor could then delete the file, I get the message "the falied to delete operation. So as a result, I can't open the CONFIG folder to be able to put the "new" SYSTEM repair file Then of course as a result I can't go to step 2 (safe mode) because I keep getting the error about the missing or damaged file SYSTEM.

  So in summary: I can see the SYSTEM file in the config folder, dated a few days ago. But I can't make them disappear to put in the place of repair file SYSTEM safe mode and access.

  Does anyone have a solution for this? Thank you

  I see.

  All too well since KB307545 normally should be attempted If chkdsk /r does not solve the problem.
  I'll look into your question. But in the meantime, boot from the CD and rerun the Recovery Console. When you get the C:\ prompt, type the following
  Chkdsk /r
  then press the Enter key (there is a space before the slash).
  You may find that chkdsk /r is all you need to do to fix your problem. Let us know!

• can I fix this error - \windows\system32\config\system

  my daughter has a compaq mini netbook... start says file is missing or damaged - \windows\system32\config\system he says that you can attempt to repair by starting windows configured using the original installation CD. I have not... How can I fix?

  Hi Tyler

  You cannot download Windows Xp. However, you can try to repair your current installation by using the Recovery Console. Download the recovery from HEREConsole. Unzip the folder choose Extract the iso file to your desktop for convenience. Click HERE for the instructions to burn the iso image. You need to a blank cd. Once you've burned the image, you will need to boot from the cd.

  1. Insert the CD from Recovery Console in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD. (Usually the message will be "Press any key to boot from cd")
     
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
     
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
     
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
     
  5. at the Recovery Console prompt, type the following lines, pressing ENTER after you type each line: each line must be typed exactly as it appears below.

  MD tmp

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  copy c:\windows\system32\config\software c:\windows\tmp\software.bak

  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak

  copy c:\windows\system32\config\security c:\windows\tmp\security.bak

  copy c:\windows\system32\config\default c:\windows\tmp\default.bak

  delete c:\windows\system32\config\system

  delete c:\windows\system32\config\software

  Delete c:\windows\system32\config\sam

  delete c:\windows\system32\config\security

  Delete c:\windows\system32\config\default

  Copy c:\windows\repair\system c:\windows\system32\config\system

  copy c:\windows\repair\software c:\windows\system32\config\software

  copy c:\windows\repair\sam c:\windows\system32\config\sam

  Copy c:\windows\repair\security c:\windows\system32\config\security

  Copy c:\windows\repair\default c:\windows\system32\config\default

  Type exit to quit the Recovery Console. Your computer will restart

  Kind regards
  Chauvet J.

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...