Configuration cannot be verified - username or incorrect password? No, it isn't,

Similar Questions

• Configuration cannot be verified - is the name of user or wrong password?

  When I go to set up an account on Thunderbird is coming with the configuration cannot be verified with my outlook e-mail.

  Does that help?

  https://support.Mozilla.org/en-us/questions/1071245

• Cannot set the IMAP mail - configuration cannot be verified

  Hello

  I have trouble to set up my work as an Exchange IMAP messaging in a new installation of Thunderbird. Once I put in the address of the server that Thunderbird retrieved all the security settings, which I checked against the supplied parameters that are listed in the webmail. I've also used these parameters to configure mail IMAP on my phone for triple controls everything. However, in the account configuration screen, I still got the message "Configuration cannot be verified - your name of user and password correct? (again, I checked everything I used independently and they have been accepted). Once I came out of the initial configuration screen error replaced by the following:

  "The GSSAPI/Kerberos ticket is not accepted by the < email address > IMAP server. Please check that you are connected to the Kerberos/GSSAPI Kingdom".

  The only possibility I can think is that Thunderbird tries to use my e-mail instead of the server to authenticate the reason why I'm getting the error. The e-mail address is [email protected] while the server is soliscom.uu.nl.

  Any help or suggestions that anyone has would be welcome,
  See you soon.

  Under Tools/account settings /AccountName/Server Settings, check that you have for the authentication method. "Normal password" is not the most common configuration for secure connections, Kerberos/GSSAPI, which seems to be the reason why you get the error message.

  But if you are sure that the Kerberos/GSSAPI authentication is required, see this article for instructions on how to make the necessary changes in the Config. Publisher:

  https://ITServices.Stanford.edu/service/emailcalendar/email/config/thunderbird_imap_kerb

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• Username or incorrect password when it is opened, Microsoft Money file

  I was using the money for several years now, with the same user name and password.  Not all of a sudden the money does not recognize these.  I tried everything but nothing works.  I tried to reset my password, but it doesn't always work.  I've uninstalled and reinstalled the sunset money more version, but still nothing.

  I tried to create a new money file with the Windows Live ID, but it does not always recognize mu username or password.

  Runs from zero, do not use a password, I don't know what to do.   I am not technically savvy so keep in mind, with all the answers.

  I use Windows 7 if that helps.

  Thank you

  Kate

  Hello Kate,

  Thank you for your response.

  I appreciate your time.

  I suggest you to check the issue in a new user profile as old user profile may be corrupted.
  Refer to this article:
  Correction of a damaged in Windows 7 user profile
  https://support.Microsoft.com/en-us/help/14039/Windows-7-fix-corrupted-user-profile

  Please keep us updated.

  Thank you

• WRT610N - Incorrect password or unknown username question

  I have the router connected to WD My Book 1 TB HD for a few weeks with no problems.  Now, it requires that I manually connect to the drive mapped to the HD access.  Have reset to the factory settings and remappe by car, but every time that I reboot I get the error message "Incorrect password" when I try to access the mapped drive.  Any thoughts on how I can get the drive mapped to remember the login and the password?  Operating system is Windows XP Home edition.

  Thank you, unfortunately he only gave me the id and the password.  In the end, I set up new users through the configuration of the router and synchronized the username/password with the Windows login (I'd heard of suggestion).  I was trying to avoid that the router GUI to save the information in a file on the directory root of the SIN.  As long as I have not access shared root (which I do not wish to) this should be good.

• The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server?

  All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:

  The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)

  When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).

  Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.

  I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.

  Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!

  Can someone please help? Thank you

  Hello

  Welcome.

  Just a tip, never download and install anything on your PC, unless you know and trust him.

  > «Computer brand new...» I need help for step by step easy. »

  Contact the PC manufacturer emphatically support team.

  > ".. . Office 2007 installed...

  Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.

  You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.

  > «Server that you are connected using a security certificate which cannot be verified...» »

  Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .

  Remember: keep the system tools and security update.

  Success.

  Rgds.

  itconcerned

• Incorrect password, cannot connect to Web sites

  Hello
  I use FF 6.0.2
  On this version, I get this question.
  Whenever I try to access my account on many Web sites, I get the message "incorrect password" using the incremental copy feature. Same thing when I'm typing the id and the password by myself.
  Don't not occur when I use another browser and it was fine on 5 FF.
  Any ideas?

  This problem may be caused by corrupted cookies.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/cookies
  • http://support.Mozilla.com/kb/cookies
  • http://support.Mozilla.com/kb/deleting+cookies
  • http://support.Mozilla.com/kb/how+to+clear+the+cache

• Network access: 1326:Logon Error failure: unknown username or bad password.

  Why this message continues to flow upward on my Vista to access network: Error 1326:Logon failure: unknown username or bad password. I have no problem online or doing normal tasks, but it becomes quite boring. Help, please!

  Hello

  ·         Have you made changes before the message starts popping up?

  ·         When exactly the message arrives?

  Method 1:

  Put the computer to boot and check which application causes the error:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to a normal startup by following step 7 from the link above.

  Method 2:

  Update the BIOS and check if the time is set correctly.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Problem creating test instance, cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I got following error when running tests on the Workbench 2.1

  
  

  [February 19, 2014 16:27:10: TRANSPORT] [0] FRAME: Async command is monitored by the process of STAF 73

  [February 19, 2014 16:27:10: FACTORYIMP] SETTING [0]: insert in the container

  [February 19, 2014 16:27:10: TESTHASH] [0] INFO: VirtualMachine installation process

  [February 19, 2014 16:27:10: VIRTUALMAC] [0] FRAMEWORK: the Setup() method called

  [February 19, 2014 16:27:10: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:10: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_VM getvms anchor 192.168.8.158:administrator

  [February 19, 2014 16:27:11: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = '192.168.8.150' password = 'infocore"username ="root") returned UNDEF

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] FRAMEWORK: new creation vaaivm1-150 VM from scratch...

  [February 19, 2014 16:27:11: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 19, 2014 16:27:11: TESTHASH] WARN [0]: found objects that need to be cleaned

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] INFO: cleaning of the virtual machine: vaaivm1-150

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAME: HostSystem Cleanup() called

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAMEWORK: the location of the swapfile to the directory of the VM on the host 192.168.8.150 restoration VM...

  [February 19, 2014 16:27:11: HOSTSYSTEM] SETTING [0]: setting VM Swapfile location to use the directory of the virtual machine

  [February 19, 2014 16:27:11: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_Host localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:11: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_Host setswapfilelocation anchor 192.168.8.158:administrator host 192.168.8.150

  [February 19, 2014 16:27:31: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:SetSwapFileLocation (HostName = '192.168.8.150' password = 'infocore"username ="root") '1' returned

  [February 19, 2014 16:27:31: HOSTSYSTEM] [0] FRAME: destruction of object 192.168.8.150...

  [February 19, 2014 16:27:31: LOGMANAGEM] COMMENTS [0]: recovery log file 192.168.8.150 host vmkernel.log

  [February 19, 2014 16:27:31: FILEUTILIT] [0] FRAME: PutTmpDirectory - called for destination host localhost

  The same problem was sloved.

  Re: Hardware Certification-do can not find the storage50info.txt file to...

• 9300 user - set up email - blackBerry Smartphones baffled - incorrect password error

  I hope someone here can shed some light ofn this because I spent 3 weeks trying to solve and I'm still stuck after literally hours on the phone to the network provider and explore every possible potential cause.

  About three weeks ago, I upgraded my Curve 9300 BB at 9380.  I copied settings using desktop software preconfigured and transferred to my new camera.  Applications reinstalled fine and I put five e-mail accounts, including 3 (business email) offered in a hosting account with Media Temple.  These all work very well and still do.

  My old phone had to be given to a colleague, so I reset the device and set all settings at default and follow the procedure for a new SIM card.  When we tried to put in place the enamel on the old device (9300) wouldn't giving the error message Impossible to verify the account contact email provider.  I am the administrator of the e-mail accounts so I know that the settings are correct., network provider resets all settings for email etc and account details BIS etc are all correct.  The e-mail account works through outlook and is accessible via webmail, and we tried changing password and even deleted and created a new e-mail account, but always the same problem - error message telling the user or incorrect password.

  I hope that it was a problem with the settings of the old appliance (9300) we could identify and address but it seems not to be that now when I try to put in place a new e-mail account on my new camera (9380) I get the same problem!  User password error - when data are 100% correct and on a device that I have successfully implemented the same type of email account!

  I'm completely puzzled and if anyone has or knows a similar problem and has information about this, or has managed to solve, I would like to hear that I've explored everything I can think of network hosts and email.

  You must call your provider to find out if the 9300 is properly registered on their network and on behalf of SIM card in the device. They need to confirm the good BlackBerry data Plan on this account, it is not unusual for them wrongly not do or provide incorrect data plan.

• Problems uploading to Youtube, authentication cannot be verified?

  I tried to download on youtube and when I click on sharing and fixed parameters, I want and clicked ok, then the next screen says I have to allow Adobe to download on Youtube, so I allowed and he said thank you and click on the complete authrization and when I did I get "error, your authorication of details cannot be verified"Please try again". So I try again and get the same results, and here's the screenshot of the comment by s. Anyone know what I should do to fix this problem and how? Thank you!

  

  ronthodges

  Various assumptions to try this or that...

  a. If you have a gmail account, can you connect to YouTube with the gmail ID and password?

  b. have you tried with the cover lock on?

  RTA

• I entered too many times an incorrect password and now I can't sign plus

  I entered too many times a wrong password in Firefox sync and now I can't sign anymore. How can I sign new?

  I called the big players to help you. Good luck.

  Many web sites have a "time out" in the case of multiple incorrect passwords.

• Connection failure: unknown username or bad password

  I use Thunderbird without problem for businesses for nearly eight years. I currently run at the top of a tower with Windows 7 Pro. There is only a single account/e-mail address on Thunderbird.

  This morning when I went to check my e-mail I have my password is requested, then received the error 'sending of password did not. Mail server exchange.company.com replied: connection failure: unknown username or bad password. "I retried the password, restart Thunderbird and tried again, but still not received the same error. I sent an email from Thunderbird test which was very good. I am also able to connect to the server via web browser and I am able to send and receive emails on my mobile device.

  I erased all the saved passwords of Thunderbird and I checked account settings, but I am still unable to download any email Thunderbird.

  Apart from the deletion of the account, I don't really know what to do here. Any help would be appreciated! Thank you.

  The problem has been resolved. Apparently the POP stack had to be reset by the side of the Exchange.

  I hope this helps someone in the future...

• "iTunes cannot be verified.

  Software update showed on the screen.

  I went as usual.

  Repeated when you restart after update attempts, I get the dialogue, "iTunes cannot be verified; "Try again from App Store then restart"- or almost identical to those words.

  I signed up on iTunes and back in.

  I disconnected from the App Store and signed in.

  I seemed to successfully download the update to iTunes directly from iTunes, but he continues to appear in the updates on the App store. When I restart the installation, it seems to continue on the same point every time - about 200 MB short term. The process seems to resume and complete normally, but rebooting produces the same "can't check" every time.

  I'm a casual user of limited technical skills and feel pretty good one.

  All the suggestions and explanations appreciated.

  Thank you.

  After running two first aid, process completed.

  First aid could or could not have something to do with it.