Configuration how Mediaplayer is called

Similar Questions

• How the webservice call (two way ssl) from a composite?

  How the webservice call (two way ssl) from a composite? What configuration of weblogic, I put?

  Problem with one of the managed server while activating SSL. _ issue Resovled

  Certificate is not correct according to standarad for its use.

  Kind regards
  Anuj

• How can I call a stage, which is in a sous-suite, of a different sous-suite

  Hi, could someone me, please?

  How can I call a stage, which is in a sous-suite, of a different sous-suite.

  For example:

  Two sub sequence, is called, it is called B. In the order B, there is a step called BStep.

  In a sequence, there is a stage called AStep.

  Now, I Hope AStep can I call BStep, how can I do?

  Thank you in advance!

  Allan,

  What you're asking to do is not a practice of good software.  That's like saying you want to call a single line of code into a DLL.

  The best way to do what you want is to put the steps in a 3rd sous-suite.  Then set the subsequence with the parameters of the step.  Then call this subsequence of a sequence and the sequence B 3rd.

  This way, whenever you update the stage, they both get changes.

  Hope this helps,

• How to properly call modal vi function in the C dll

  I have a labview function that takes a string as input and passes out when the user clicks OK in a 2 button dialog box. I have built a dll and then calls the function from a C++ environment by using the LoadLibrary function. If I set the Panel before shows the default settings and NOT modal the vi is displayed correctly but the dialog box box does not work. If I put the Panel before the vi to modal then vi front panel display correctly, therefor there I find that the dialog should be modal in his view.

  My question is about C++ How can I call a dll that displays a Modal form correctly? or how can I change the dialog box in modeless behavior / defect that can be done to the face before of the vi?

  Thanks in advance for any help.

  Hi, thanks for yor reply.

  The dialog box displays only partially. No, I have not tried the express vi, but I did create a vi to behave like a dialog box 2 button

  allowed me to define it as modeless. It also displays only partially.  I since first announcement also tried to run the dll also using labview and teststand to call the dll, in both cases the dll load and behaves correctly, the dialog box appears correctly.

  This suggests that the problem is with the C++ code but not being is not a very experienced C++ programmer I don't know how to debug the problem more far.

  Any help is highly appreciated.

• How to make calls telephone entrants House to show on computer?

  Original title: show phone numbers.

  Windows XP SP3, PCI Soft Data Fax Modem with SmartCP. My question is how to make calls telephone entrants House to show on computer?

  I have phone line connected to the modem 'in' connection and main phone is connected to the "out" connection. The computer used to display incoming calls from land line, but I had a crash that required me to do a clean reinstall of Win XP and etc, etc, and I don't remember how to set up.

  Thanks in advance,

  Chris

  CallerID display isn't natively provided by Windows XP.  Either you need to reinstall the software SmartCP and/or additional software originally installed on your computer.

  Go to the website of the manufacturer of your computer for you make sure you get the correct version.

• How to block call someones on z3 compact

  How to block call someones on z3 compact

  You can't actually block. There is an option to send calls directly to voicemail, but to block you cannot without a 3rd party app.

• How can I call the stream media player in webworker.

  Hi all.

  I need a few snipets of invoke media player from the webworker blackberry

  How can I call it stream media player in webworker please help me.

  You should be able to:

  location.href = 'mymediaurl';
  

• Smartphones blackBerry how to block calls or I cant.

  need to know how to block calls

  Hi theunderdogg1965

  Welcome to the community

  If you want to block some calls on your device, you can install any App.Go to App World of call blocking, and there are several version free call blocking app available. It allows to block these calls.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• How can I call Adobe? I need to talk about how to create my site and bind it to lightroom. I have creative cloud.

  How can I call Adobe? I need to talk about how to create my site and bind it to lightroom. I have creative cloud.

  The only phone support I know is not for sales, the use of programs

  You will also likely get detailed assistance in the specific forums for the programs you use

  Forum of https://forums.adobe.com/thread/1929760 to find a forum for your program list

• How can I call method on the view controller Business components

  Hello
  I did a general method to display messages at the view level,
  How can I call this method in the method after validation in the EntityImpl appears automatically after the validation operation.
  Gold how can I call it in _ validationbutton to display after validation;
  
  public class MessageBeans
  *{*
  public static void showMessage (String title, String msgBody, String msgType)
  *{*
  
  FacesContext fctx = FacesContext.getCurrentInstance ();
  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_INFO, title, msgBody);
  fctx.addMessage (null, msg);
  
  
  *}*
  *}*

  1 - Drag and drop the operation of control of data validation on the page.
  2 - Double click on the button, this will bring the dialog box link Action property that allows you to link the button action method in the bean.
  3 - Select the managed bean, or create a new and enter the name of the method. and click Ok.
  3. This will create a method for you to like those posted before, you just need to change the method and show the message after successful validation.

• Catch 22 - Port Trunk Configurations: how to combine identifiers VLAN native with DHCP (but allows traffic of VM)

  Catch 22 - Port Network Configurations: how to combine identifiers VLAN native with DHCP (but allow the virtual computer)

  I came across a Catch 22.  Maybe someone can restore the directly here.  I found a "witch hunt" for sure.

  It comes with the Ports of junction on the side of the switch of the ESX host network.

  Context:

  Ok. The Setup is a HP Blade C7000 enclosure.  I try to configure ports for switching to the blades.  ESX 3.5 U4 will be installed the BL460cs.  Installation is preferred method: revive unattended.  No problem with the syntax of Kick-Start,

  I am here, it's the side network.

  The problem:

  I find a major complication in that the switch ports must be configured for both traffic Service Console and VMkernel, more Virtual Machine since only two NICs by blade. Not best practices, but we have only two switches Cisco 3020 inside.  The two uplink physical NIC is paired in the same vSwitch.  (No iSCSI does fortunately).

  So the Catch 22 question is as follows:

  If the id VLAN native set up on the switch port, DHCP works of course and the VMware boot loader is able to grasp a binary / packets on the network (FTP Site) and install OK.  But after no installation, no communication with SC unless I set the VLAN id of the SC to '0 '.  The value "4" 0 does not communication, but "40" is the VLAN native.

  If id configuring VLAN native retired from the Switch port, DHCP will not work and host does not have IP address during the VMware boot process.  This is as expected as traffic without label is not assigned an eligible

  VLAN, so no comms.

  The Port of the Switch configuration:

  interface GigabitEthernet0/16

  SERVERNAME description

  switchport trunk encapsulation dot1q

  switchport trunk vlan native 40

  switchport trunk allowed vlan 40-254

  switchport mode trunk

  switchport nonegotiate

  Speed 1000

  No cdp enable

  spanning tree portfast trunk

  end

  Summary

  OK, let's summarize where things are and if possible please attach responses to their digital identity.

  (1) is there a way to delete the VLAN tagging altogether side ESX host? Not only the id '0 '. The problem is with clearly with the VLAN native defined as "40".  If "40" IDs specified on the Group of ports for the Service Console, no joy, no comms. If the id of '0' value, capable of ping gateway and communicate on the network.

  (2) what is the problem with the definition of VLAN native as "40" when the config for the switch port is set as VLAN native "40"?  Or if it was a problem?  Both parameters clearly do not work together.

  (3) a switch receiving a unmarked frame it will assign to the VLAN Trunk native. Ok. Trunking bases and why I need a VLAN specified on the port for DHCP native work.  But it seems that since the id VLAN is set manually even as VLAN native, closed communications and no traffic as possible.

  (4) executives made tag 802. 1 q VLAN native?  I think that it is not and this could well be the problem. Since the id VLAN "40" is not labeled, but try to score the side host vSwitch port group.

  Please let me know your thoughts, community and how in general, we are approaching 2 NIC ESX configurations.

  When trunking multiple VLANs, you either have a default VLAN is nothing is tagged, or you don't.  That's what the vlan native to you, it defines which VLAN would be used if no tag is visible on the packets traversing the network.  For servers, if you are marking, then everything has to tag, if you're not marking at the server level, then the port must be either an access port or a VLAN native or default must be set.  I also don't keep your service console the same network as your vm.  Keep this isolated for the security of the network.  If you isolate this VLAN, you can separate and use a single IP address for installation and one for post construction.

  Or, you can provide an IP address during the build.

  -KjB

  VMware vExpert

• How can I call him to XSLT transformations

  Hello
  
  I followed the first example * LoanGateway1 * from Oracle Service Bus samples and tutorials *.
  
  normalLoan It's the WSDL resource
  NormalLoan This is an external business service used by OSB
  ManagerLoanReview This is an external business service used by OSB
  LoanGateway1 It's the proxy OSB service
  
  loanGateway1_TO_managerLoanReview.xsl (request)          It's XSLT Transformation between the Service of Proxy LoanGateway1 and business ManagerLoanReview
  managerLoanReview_TO_loanGateway1.xsl (response)      It's XSLT Transformation between ManagerLoanReview of business and Service of Proxy LoanGateway1
  
  
  Definition of the scenario: a client sends a loan application to a proxy service named LoanGateway1. The default proxy
  service at a stage of conditional routing that checks the value of the interest rate charged in the
  loan application document. If the interest rate is less than 5%, the loan application is forwarded to the
  ManagerLoanReview business service; otherwise, it is routed to NormalLoan business.
  
  From the console of the BSO, I would invoke the XSLT (loanGateway1_TO_managerLoanReview.xsl) to do the conversion application between the Service of Proxy LoanGateway1 and business ManagerLoanReview
  
  From the console of the BSO, I would invoke the XSLT (managerLoanReview_TO_loanGateway1.xsl) file to do the Transformation of response between the ManagerLoanReview of business and Service of Proxy LoanGateway1
  
  
  Can someone tell me how I can call him to XSLT transformations?
  
  Edited by: user10070593 01-mar-2011 05:24

  When you have selected the XQuery, located below, you should an inputfield where you could put in an xpath expression

  So let's say the variableentree of your xslt is my_input, it will show my_input on the left then to the right, it shows the inputfield in which you can put something like $body / *.

  If you do not see the inputfield check if you use the variable 'my_input' in your xslt
  in xquery there will not display the inputfield when you don't make any expressions xpath on the variable, in order to check that too

• How can I call Save as dialog box before you download pdf files?

  How can I call Save as dialog box before you download pdf files?

  Here's my favorite scenario:

  1. the user clicks on the button

  2 Save as dialog box displays

  3. the user chooses the place

  4. a set of PDF files download here OR download a single zip file

  Background:

  I want to ensure that the user sees that the files are downloaded. I'm content to users who are not Web warned.

  Concern:

  1. the user has no idea how to find the downloaded files or files have even downloaded.

  2. I would like to deliver all in the form of zip files. Not sure if the automatic opening of zip files still exist.

  FOR INFO:

  I use jQuery UI buttons. Not sure if that factors in the response.

  Just for clarity, I'm not forcing a download. The user will click on a button.

  Click on a button or click on a link, either way you are technically running a script to force a download.

  I guess that's the PHP on the server.

  Yes but it is only a part of it.  Once the form runs, another script is called that opens the browser download dialog.

  Y at - it a php script to call the open/save dialog box?

  Yes.

  Name this file zip2download.php.

  Add a link to your HTML page:

  zip2download.php">Download the Zip

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• How can I call two functions in the HTML Form element attributes

  Hello
  
  I want the same value in the text field two, when I select the value to select the list then the value with a number increment should be two text field.
  I use both java script
  
  < script >
  function sumItems() {}
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P19_LAST_END_YR').value = getVal ('P19_LAST_STR_YR') + 1;
  }
  < /script >
  
  
  < script >
  function per1Items() {}
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P19_LAST_END_YR').value = getVal ('P19_START_YEAR') + 1;
  }
  < /script >
  
  
  now how can I call function onchange two attributes of the element in the HTML form for the discount:
  ' onChange = "javascript:sumItems()" onChange ="javascript:per1Items().

  Hello

  Try

  onchange="sumItems();per1Items();"
  

  BR, Jari

• HP Officejet Pro 8610: Unclear Instructions online, using the phone fax configuration, how to print envelopes

  Terminology used in the instructions I'm not familiar with.

  Hi @chazz85,

  I'd be more than happy to help you with your configuration envelopes and printing of fax.

  Are there specific terminology that you want me to explain?

  Let's start with the implementation of the fax machine.

  The best market-well because it is in this document to set up a new Fax.

  For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.

  • Is he a dedicated phone line? Only used for faxing.
  • Or is it a shared phone line? Phone and Fax.
  • Is your analog phone provider (typical telephone lines) or digital? (Cable connection)

  If the row is shared;

  • You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
  • You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
  • You have voicemail? A subscription to voicemail service using the same phone number as the fax.

  The (Simplified) recommended configuration would be;

  1. Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer

     Then, if any;

  2. Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
  3. Your phone will then connect on the answering machine (once again using any phone cable)

  Once I have more information about your setup I can help you further.

  Now for printing the envelope.

  I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;

  NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.

  1. remove the main input tray. Remove all existing paper from the tray.

  

  2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.

  

  NOTE: Do not load envelopes while the printer prints.

  3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.

  

  4. remove the output tray extension until the planned paper size is reached.

  

  I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.

  If it's another program, you can try the manual suggests.

  1 load the envelopes face to print down in the status bar.

  2. in the menu file in your software, click print.

  3. make sure that your printer is selected.

  4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.

  5. Select the appropriate options.

  • Under the layout tab, select Portrait orientation or landscape .
  • On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
  • Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.

  6. click OKand then click print or OK in the print dialog box.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you