Configuration Manager Manager and update

Similar Questions

• ePower Management and update of Windows 7 (March 12, 2013)

  Has anyone else had a message of compatibility for the ePower Management with the latest update of Windows 7.  Acer response was to send the laptop... Right.

  Acer is aware of the issue that has been reported and has worked with Microsoft on a resolution. The link for the update should work now, however, you may need to restart your system for the update to install correctly. If you're still having problems, Acer has posted these updates on our site for download. You can find a link to download updates to our support http://acer.custhelp.com/app/answers/detail/a_id/29568article. If you're still having problems, please continue to post and we will help in any way we can.

• The app designer go menu access to configuration manager

  Hello
  I was wondering how to control access to the configuration manager link inside app designer go to menu.
  I see options like Data Mover and security definition of objects is managed via the permissions list, while the 'configuration manager' and "replay cache app server" is not there.
  
  Interesting thing is when I take the role of 'administrator' Peoplesoft out user profile, 2 items - config manager and app server cache links went in the menu go.
  
  Is there another way, you can control access to these links, other than the "peoplesoft Administrator role.
  
  Thank you
  Subhash

  Hello

  'PeopleSoft administrator' is a reserved role and will not be able to open in the PIA.

  Select the separate CLASSID
  of PSAUTHITEM
  where NOMMENU in ('REPLAYAPPCRASH', "CONFIGMENU");

  Result:
  HCSPTOOLS

  Attach the menu above for a list of permissions and roles and try to access the same,

  Thank you
  Jean-Marc

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Dell order and integration Suite for System Center Configuration manager 4.0

  Hello

  I just installed the Dell order and SCCM integration suite.

  When you try to import a driver cab file to create a driver package, I get an error saying that the software could not recover present distribution points in the server.

  I tried to install the suite actually on a distribution point, but got the same thing.

  Any ideas?

  Thank you

  Close the Configuration Manager console.  Then re-open it by right-clicking the icon and select run as administrator.

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

• Creative Cloud Desktop manager and application manager Adobe disappeared during some sort of update. Tried to uninstall and reinstall creative clouds (received the message I needed to App Manager). Tried to install App Manager (got the message, I needed c

  Creative Cloud Desktop manager and application manager Adobe disappeared during some sort of update. Tried to uninstall and reinstall creative clouds (received the message I needed to App Manager). Tried to install App Manager (got the message, I needed creative cloud). Tried Cleanup tool for CC and CS6. Always impossible to install CC desktop manager or Adobe Applications Manager. Running on Mac, Yosemite 10.10.3.

  See the link below:

  Of nowhere, cloud Creative works not

• vCenter Server Virtual Appliance and Update Manager

  Hello

  Anyone with experience in the present? Documentation says that it is not possible to install the update on a VCSA Manager but you can install the update on a Windows Machine Manager and point it at the VCSA.

  Anyone try? It works as recommended by VMware?

  Thanks in advance!

  elgreco81

  As petkom says...

  That works, let some customers like that, no problem.

• Configuration guide for ESXi 5 (Vmnetwork, management and vMotion) with NIC 2 network

  Hello

  I have 4 NIC in Server Blade 7 (ESXI 5), would like to dedecate 2 NIC for (Vmnetwork, management and vMotion) & NIC (iSCSI traffic) 2 with equallogic SAN.

  I equallogic guide to configure ESXI with it, but how do I configure (Vmnetwork, management and vMotion) with NIC 2, my priority is excellent speed for my virtual machine, and then nothing else.

  Then just go for classic switch.

  The configuration is a lot depend on existing infra, the trunk, the physical switch for redundant network & balance, 100 or network 1GbE, no.. virtual machines and etc. If there is a new configuration, I suggest you trunk 2 x available vmnic (the vm network) to balance the load and better performance.

• 5 and update manager vCenter

  Hello

  I installed vcenter and update manager as a virtual machine host.

  Now when I want to use the update patch of the host Manager, it takes all the vm to stop.

  Obviosly if I stop the VM guests, this includes the vm vcenter himself who then stops updates.

  I tried to connect directly to the host without vcenter but then there is no Update Manager.

  Any way around this?

  Thank you

  Chris

  I would start by setting up the vmware in your main site environment - Essentials you are able to use the vmotion and HA - vmotion you will deal with the current issue - would you be able to vmotion virtual machines on a host and update without havomg yp sjut down virtual machines. With HA you will be covered in the event of hardware failure - if an ESXi host to crash the system VMs automatiically will restart on the remaining hosts.

  Bit please be aware vmotion and HA require shared storage - either SAN (iSCSI and storage FC0 or NAS/NFS -

• Deployment and configuration management

  Are there recommended recommended somewhere on how to manage different workflows using some kind of configuration management?  I develop a dozen about the workflows that will be combined in a package, but this environment does not seem to fit with a typical software development configuration management model.  How other people have addressed this issue?

  Once that flow in a kind environment CM which is only a good way for the distribution of the package?  They have just made available to consumers through a portal or is there a better way to do this?

  Hello

  You can export a workflow or package to the system of file every time change you it and commit to your Conference Management System.

  It is not perfect, but works.

  The other thing you can do is to use different servers of vCO as package repositories and synchronize packages when appropriate. I wrote an article about it here.

• VShield Configuration Manager 4.1 (and how to protect a virtual machine?)

  I have 2 ESXi hosts currently configured in vCenter 4.1.  Before vShield installation Manager, he had 3 vSwitches present on each server; a regular and two distributed.

  • vSwitch0 - connected to vmnic0 - has management and production of network 1 10.168.90.x

  • VLAN 10.1 - VMFN connected to vmnic1 on each host - connects to the private physical network 10.1.x.x

  • VLAN 10.2 - VMFN connected to vmnic2 on each host - connects to the private physical network 10.2.x.x

  After you install vShield Manager in a new virtual machine and then to deploy vShield Zones to each ESXi host, develops a new vSwitch

  vmservice-vswitch - again group of ports in Virtual Machine vmservice-vshield-pg - not connected to any physical cards

  VMS individual vShield-FW created for each host have connected network cards as below

  • Production network normal 1 - VM Network adapter (attached to vSwitch 0).

  • Production network normal 2 - VM Network adapter (attached to vSwitch 0).

  • Adapter 3 - vmservice-vshield-pg network

  I tried to connect my VMs to the network vmservice-vshield-pg in order

  to protect them and place them behiind the firewall.  However, who has

  seem to work, and my VM has lost network connectivity.

  How to protect a virtual machine that needs to connect to the normal production

  Network (on vSwitch0)?  Is there any configuration steps I'm missing?

  What happens if I want to connect a virtual machine or one of its network cards to one of the 10.1.xx

  or 10.2.x.x networks rather than the normal 10.168.90.x network?  What

  additional steps should I make?  The new 4.1 documentation is not

  helped at all, and it seems that the old vShield Zones 1.0 docs are not

  applies to all.

  There is no need to change the virtual computer is connected to the network.

  Just activate/install vShield zones on your hosts and add rules to the vSwitch or data center.

  The virtual machine will be becomes protected if no error is displayed.

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• vCenter Server 4.0 and Update Manager

  Hello

  Can vCenter Server 4.0 and Update Manager be installed on the same server?

  I understand that they both must separate databeses.

  Thank you

  Euan

  Is the same as VI 3.5.

  You need two DB, but also on the same SQL instance.

  So you can install on the same computer.

  See also pages 10 and 11:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

  André