Deployment and configuration management

Similar Questions

• Deploy and configure Agent 12 c has failed

  Hi all
  
  We are trying to install 12 management agent using the method to push the current WHO 11.1 agent
  so far, we have applied the patch to upgrade console pre and don't have not upgraded to 12 c SGD again.
  We use 1 uproach system upgrade. and use the push agent of our current 11g SGD method to deploy and configure the agent of 12 c.
  I'm confused with the user name and password in the credentials section root, we do not have password oracle as we use power broker. and we either root password.
  When I try to run the task, it fails
  I asked the unix guy to help out me, they said that they can not install sudo as we don't use it.
  Please help am I missing something here.
  
  on the other hand, I installed the agent 12 c on 5 hosts of the 59 that we have since I got the root password it went smoothly.
  
  Thank you
  SJ

  Youe query is not clear to me. 12 c agent is not supported with EM 11 g SGD.

  When you use 1 system upgrade, you must use the pre-upgrade console to deploy agents and go through the process of upgrading the agent. In this console pre-upgrade, born to provide to the agent you install user to install the agent 12 c and switch.

  If this installation agent user has no root privilliges or if you have any credentials to the root, and then enter the credentials for the agent. In this case, the root.sh script is not run, but the deployment is successful. Make sure that you run this script after deployment of the Management Agent, before manually to use the new Enterprise Manager 12 c cloud control system. Otherwise, you will not be able to perform tasks on the Management Agent. If the root.sh script is not executed, passage of the Management Agent is not affected.

  Oracle 12 c, the existing connectivity between the former Agent of management and WHO is used to deploy and configure the Management Agent; SSH is not used.

  Refer to the upgrade guide:
  http://docs.Oracle.com/CD/E24628_01/upgrade.121/e22625/TOC.htm

• ISE distributed deployment and license management

  Hello

  I have 2 x ISE-VM-K9 = licenses, and I want to deploy ISE mode Standalone with HA.

  IE, have 2 boxes Node1 and Node2 each hosting all three personas and closely located in 1 data center.

  so, I want to have a third box 3 node in a data center remotely (only for purpose of DR).

  What is the best way to design it.

  1. do you have nodes 1 and 3 in a host group and use as aaa primary and 2 secondary node

  2 have Node1 and 2 in a local host group, then the host of another entity 3

  I'm worried about the condition of licence of the 2nd option

  Any thoughts?

  concerning

  Sergeant

  Do you mean group of PSN node when you say "host group"?

  Licenses-wise, all the nodes in a deployment of share ISE licenses installed on the Pan

• To the production Oracle Configuration Management support

  Hi all
  Currently I'm going to Oracle DBA in the production support team. I get call from the Configuration Management team that come to this team. I don't have much knowledge about the CM. Now my question is
  
  1. What is the average of the Configuration management? What is the process generally goes into CM? It has no connection with oracle dba support?
  2. If I'm going to and Configuration management work, again I can come to field support for s/n?
  3. the CM is good for the growth of the carrer...?
  
  Pls clarify me. Thanks in advance.

  Salvation;

  Also check:

  Documentation
  Available at: http://download.oracle.com/docs/cd/E18041_01/index.htm

  Oracle Configuration Manager prerequisites
  Version 10.3.4 - part number E18274-01

  Manager Configuration Oracle Installation and Administration Guide
  Version 10.3.4 - part number E18035-01

  Oracle Configuration Manager Security Overview
  Version 10.3.0 - part number E12881-01

  Distribution Oracle Configuration Manager companion guide
  Version 10.0.1 - part number E14501-02
  Topic: Mass deployment

  Source:
  Index of Master for the Installation of the Manager (OCM) Oracle Configuration, installation and Configuration [1304794.1 ID]

  Respect of
  HELIOS

• Dell order and integration Suite for System Center Configuration manager 4.0

  Hello

  I just installed the Dell order and SCCM integration suite.

  When you try to import a driver cab file to create a driver package, I get an error saying that the software could not recover present distribution points in the server.

  I tried to install the suite actually on a distribution point, but got the same thing.

  Any ideas?

  Thank you

  Close the Configuration Manager console.  Then re-open it by right-clicking the icon and select run as administrator.

• Video tutorial on Installation and Configuration Forms11gr2 (development and deployment)

  Dear Exparts

  Nice day.

  I'm going to install and configure (reports, webutil etc..) Oracle Forms11gR2 (11.1.2.2) for development and deployment.

  I want to make everything fine. So, before you start I want see tutorial for all this work).

  Can someone help me? (Team Viewer also available on request.) Video tutorial is the first choice.

  Thanks for your time.

  Ask2Learn

  Asked to know wrote:

  Thanks for the link.

  Can you please guide on the development and deployment?

  No patch needed/mendetory for the 64-bit version?

  Ask2Learn

  Hello Ask2Learn,

  Mode of development is fear that the characteristics of the development environment and mode of deployment is for most of the features of the production environment.

  Select any type and click Next and you will see the list. Web search for each components for more information.

  A few mandatory path for 64-bit according to the version of the OS.

  Please check support.oracle.com

  See also the list bit.

  

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Configuration Manager Manager and update

  Hi all

  What is the difference between Configuration Manager and Update Manager?

  Thank you

  Djamel

  Hello

  They are certainly different products from Troy, but both have their uses for security. VUM is necessary to determine the status of patches and fixes, while configuration manager will monitor your systems configuration drift (to some extent) is Host Profiles. But Config Manager monitors your systems for both compliance issues.

  The two types of tools are necessary for good security.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Configuration Manager: adobe-rca-core - service.jar deployed but not started

  Hello

  I just installed Solution Accelerators. Now I'm in configuration Manager. Unfortunately, I got a warning: (translated since I'm German) "adobe-rca-core-services - dsc.jar is deployed, but currently don't not running." (German: "adobe-rca-core-services - dsc.jar ist new, wird aber zurzeit nicht ausgeführt.")

  If I take a look in LaunchLCM.log I found the following:

  [2011-06-06 11:41:08, 576] INFO wire - 12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCsDialog, progress: [52%, DSC wird new adobe-rca-core-services - dsc.jar]
  [2011-06-06 11:41:08, 645] INFO wire - 12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, DSC install [/ home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar, com.adobe.livecycle.ReviewCommentingAndApproval, 9.5.0.0.20100915.1.164179]
  [2011-06-06 11:41:08, 645], FINE, thread-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, @.
  [2011-06-06 11:41:08, 645] INFO wire - 12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, DSC not installed. DSC will now be installed: com.adobe.livecycle.ReviewCommentingAndApproval /home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar
  [2011-06-06 11:41:08, 645], FINE, thread-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, installAndStartComponent: /home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar
  [2011-06-06 11:41:08, 645], FINE, thread-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, installComponent: /home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar
  [2011-06-06 11:41:15, 604], FINE, thread-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, startComponent: com.adobe.idp.dsc.registry.infomodel.impl.ComponentImpl@2a8c2a77
  [2011-06-06 11:41:17, 612] SEVERE, wire-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Fehler beim Bereitstellen der home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar Komponente.
  [ALC-LCM-030-200] com.adobe.livecycle.lcm.core.LCMException: Fehler beim Bereitstellen der home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar Komponente.
  at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCFiles(DeployDSCs.java:403)
  at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCs(DeployDSCs.java:151)
  to com.adobe.livecycle.lcm.feature.deployment.DeployDSCsTask$ ActualTask. < init >(DeployDSCsTas k.java:88)
  to com.adobe.livecycle.lcm.feature.deployment.DeployDSCsTask$ 1.construct (DeployDSCsTask.java:56)
  to com.adobe.livecycle.lcm.core.tasks.SwingWorker$ 2.run(SwingWorker.java:114)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.RuntimeException: did not find data source
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getDataSourceName (HibernateUtil.java: 153)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getConfiguration (65 HibernateUtil.java:2)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil. < init > (HibernateUtil.java:182)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil. < init > (HibernateUtil.java:164)
  at com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getInstance(HibernateUtil.java:326)
  at com.adobe.livecycle.rca.db.RCADBHelper.getHibernateUtil(RCADBHelper.java:260)
  at com.adobe.livecycle.rca.db.RCADBHelper.resetClassLoader(RCADBHelper.java:268)
  at com.adobe.livecycle.rca.common.audit.AuditHelper.getAuditConfig(AuditHelper.java:185)
  at com.adobe.livecycle.rca.common.audit.AuditHelper.registerModule(AuditHelper.java:106)
  at com.adobe.livecycle.rca.ReviewCommentingAndApprovalLifeCycle.onStart (ReviewCommentingAndA pprovalLifeCycle.java:31)
  to com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$ 14.doInTransaction (Compon entRegistryImpl.java:1038)
  at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
  at sun.reflect.GeneratedMethodAccessor662.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
  to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)
  at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)
  at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
  at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
  at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)
  at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
  at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)
  at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
  at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
  at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)
  at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
  at org.jboss.ejb.Container.invoke(Container.java:960)
  at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
  at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
  to $Proxy410.doRequiresNew (Unknown Source)
  at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:145)
  at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute (DefaultTransactionT emplate.java:79)
  at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.start (ComponentRegistryIm pl.java:1032)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke (DefaultPOJOInvokerImpl.jav one: 118)
  at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept (InvocationInterceptor. java: 140)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept (DocumentPassi vationInterceptor.java:53)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  to com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$ 1.doInTransaction (Transa ctionInterceptor.java:74)
  at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT (EjbTran sactionBMTAdapterBean.java:197)
  at sun.reflect.GeneratedMethodAccessor783.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
  to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)
  at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)
  at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
  at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
  at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)
  at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
  at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)
  at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
  at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
  at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)
  at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
  at org.jboss.ejb.Container.invoke(Container.java:960)
  at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
  at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
  to $Proxy410.doBMT (Unknown Source)
  at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:95)
  at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept (TransactionInt erceptor.java:72)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept (InvocationStra tegyInterceptor.java:55)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept (InvalidStateIntercep tor.java:37)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept (AuthorizationInterc eptor.java:188)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
  at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
  at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke (AbstractMessageReceiv er.java:329)
  at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall (SoapSdkEndpoint. java: 139)
  at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke (SoapSdkEndpoint.java:81)
  at sun.reflect.GeneratedMethodAccessor786.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
  at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
  at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
  at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
  at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
  at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
  at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
  at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
  at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
  at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter (InvocationFilter.java:43)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke (SecurityAssociationValve.ja goes: 179)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke (CachedConnectionValve.java: 157)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 580)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)
  ... 1 more
  [2011-06-06 11:41:17, 613] SEVERE, wire-12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Fehler beim Bereitstellen der home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar Komponente.
  [ALC-LCM-030-200] com.adobe.livecycle.lcm.core.LCMException: Fehler beim Bereitstellen der home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar Komponente.
  at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCFiles(DeployDSCs.java:403)
  at com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCs(DeployDSCs.java:151)
  to com.adobe.livecycle.lcm.feature.deployment.DeployDSCsTask$ ActualTask. < init >(DeployDSCsTas k.java:88)
  to com.adobe.livecycle.lcm.feature.deployment.DeployDSCsTask$ 1.construct (DeployDSCsTask.java:56)
  to com.adobe.livecycle.lcm.core.tasks.SwingWorker$ 2.run(SwingWorker.java:114)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.RuntimeException: did not find data source
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getDataSourceName (HibernateUtil.java: 153)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getConfiguration (65 HibernateUtil.java:2)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil. < init > (HibernateUtil.java:182)
  to com.adobe.livecycle.rca.dao.hibernate.HibernateUtil. < init > (HibernateUtil.java:164)
  at com.adobe.livecycle.rca.dao.hibernate.HibernateUtil.getInstance(HibernateUtil.java:326)
  at com.adobe.livecycle.rca.db.RCADBHelper.getHibernateUtil(RCADBHelper.java:260)
  at com.adobe.livecycle.rca.db.RCADBHelper.resetClassLoader(RCADBHelper.java:268)
  at com.adobe.livecycle.rca.common.audit.AuditHelper.getAuditConfig(AuditHelper.java:185)
  at com.adobe.livecycle.rca.common.audit.AuditHelper.registerModule(AuditHelper.java:106)
  at com.adobe.livecycle.rca.ReviewCommentingAndApprovalLifeCycle.onStart (ReviewCommentingAndA pprovalLifeCycle.java:31)
  to com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$ 14.doInTransaction (Compon entRegistryImpl.java:1038)
  at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
  at sun.reflect.GeneratedMethodAccessor662.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
  to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)
  at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)
  at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
  at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
  at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)
  at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
  at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)
  at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
  at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
  at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)
  at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
  at org.jboss.ejb.Container.invoke(Container.java:960)
  at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
  at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
  to $Proxy410.doRequiresNew (Unknown Source)
  at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:145)
  at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute (DefaultTransactionT emplate.java:79)
  at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl.start (ComponentRegistryIm pl.java:1032)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke (DefaultPOJOInvokerImpl.jav one: 118)
  at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept (InvocationInterceptor. java: 140)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept (DocumentPassi vationInterceptor.java:53)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  to com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$ 1.doInTransaction (Transa ctionInterceptor.java:74)
  at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT (EjbTran sactionBMTAdapterBean.java:197)
  at sun.reflect.GeneratedMethodAccessor783.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
  to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)
  at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)
  at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
  at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
  at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)
  at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
  at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)
  at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
  at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
  at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)
  at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
  at org.jboss.ejb.Container.invoke(Container.java:960)
  at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
  at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
  to $Proxy410.doBMT (Unknown Source)
  at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:95)
  at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept (TransactionInt erceptor.java:72)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept (InvocationStra tegyInterceptor.java:55)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept (InvalidStateIntercep tor.java:37)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept (AuthorizationInterc eptor.java:188)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
  at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)
  at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
  at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
  at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke (AbstractMessageReceiv er.java:329)
  at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall (SoapSdkEndpoint. java: 139)
  at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke (SoapSdkEndpoint.java:81)
  at sun.reflect.GeneratedMethodAccessor786.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
  at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
  at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
  at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
  at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
  at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
  at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
  at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
  at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
  at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter (InvocationFilter.java:43)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke (SecurityAssociationValve.ja goes: 179)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke (CachedConnectionValve.java: 157)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 580)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)
  ... 1 more
  [2011-06-06 11:41:17, 615] INFO wire - 12, com.adobe.livecycle.lcm.feature.deployment.DeployDSCsDialog, progress: [52%, Fehler beim Bereitstellen der Komponente home/opt/adobe/adobe_livecycle_es2/deploy/adobe-rca-core-services-dsc.jar.]

  Whats wrong here? What could I do?

  Floh Cu

  Hello

  Newspapers, it seems that data source is not correctly configured.

  Caused by: java.lang.RuntimeException: did not find data source

  Please refer to

  http://help.adobe.com/en_US/LiveCycle/9.5/install_sa.pdf(P30 Appendix)

  -Manually configure Data Sources) for more details.

  Thank you

  Ankit

• Extend the AD schema and configure the connection manager

  Hello
  
  I tried to extend the schema and configure connection manager but without success.
  
  When I have the schema in ESSO Admin Console extension displays a success message, but when I check Active Directory for objects that must appear, non of them are there.
  
  Someone can explain to me please what im doing wrong, or give me a link where measures to extend and configure connection manager is explained?
  
  Thank you

  Make sure that the agent global settings (registry settings) for the two machines are the same. These settings define how the SSO client will include (as well as synchronize with the directory). If they appear identical, I would then check to ensure that the customer who does not have a typical AD synchronization (see Add/Remove Programs). If this still isn't your problem, check the DNS of your Inbox (this implies that your non-working client is joined to the domain and log you in as a domain user).

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• How to configure WebLogic Admin Server and the managed server

  Hello
  
  I work to configure a Weblogic admin and the managed server, but fail.
  Can I know the correct steps for the installation system?
  
  
  TX.

  Good. It might be a good idea to mark this question as answered, then.

• HFM Installation and Configuration.

  Dear all,
  
  I want to install Hyperion Financial Management to a server existing which EMP which is already running 11.1.2.0 planing asks, Webanalysis, Studio of Financial Reporting, Financial Data Quality Management, with oracle databases in
  Windows 2003 R2.
  
  Can someone guide me from the beginning about the installation and configuration as well.
  
  
  
  Thank you

  This location is probably your best choice:

  http://download.Oracle.com/docs/CD/E17236_01/NAV/portal_1.htm

  Take a look at deployment files.

• Install and configure the Apache HTTP server plug-in

  Hello
  
  I use WL10.3 in a Linux machine.
  
  I have an environment where I have one WL server in a domain which is deployed with the web application
  
  And I have another area where I have two managed servers in a cluster that is deployed with the company.
  
  Now, I want to configure Apache HTTP server to make it work as a proxy with the weblogic.
  
  In my current scenario, the proxies of one seed server req in the cluster and that is defined in a jndi.properties.
  
  Now, what should I do if I want to use the Apache
  
  I have the following questions:
  
  1 forget my env, generally how to install and configure Apache HTTP plugin?
  I see that we have already seen libproxy_61.so file in /bea/wlserver_10.3/server/plugin/linux/i686
  
  Do I need to install the patch even then as said in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
  
  2. While am adding the lines in the httpd.conf file.
  LoadModule modules/mod_wl_22.so weblogic_module
  
  If I put ibproxy_61.so instead of mod_wl_22.so in this line?
  
  3. While configuring the proxy server, balancing and session replication will be assured?
  
  4. and for my setup, as stated at the beginning, a few lines, which may be the best architecture?
  
  Your help is really appreciated.

  Hi Subh
  1 so all external requests go to the single domain server with MoreWeb app. In this scenario, you don't need any additional Proxy Apache server. Because the basic concept of the Apache Web server is to route multiple applications on a cluster of managed servers. In your case, it is a single server, you don't need any additional Web front server. Now you have these EJB on another area that is clustered. I guess you use search standard JNDI to access the EJB. So, how do you make sure that only MoreWeb app requests are load balanced to the EJB. As each subsidiary request for EJB must go to MS1 and MS2 as robin in default mode. First request to MoreWeb need access EJB of MS1. Second request for MoreWeb need access EJB MS2 etc. This means in theory, you should have an Apache Web Server before the second area something like that. You have any servlet default weblogic cluster already deployed to the second area. Otherwise use that or care of apache in etc. Then in MoreWeb App when you search the EJB, make sure that you give the address Cluster and the direct port instead of the host/port MS1 or MS2. This Web server should in turn make the round robin for EJB on second domain clustered. When you get the InitialContext object instead of using empty default constructor as new InitalContext(), you may need to use something like InitalContext (aMap) new aMap corresponding to a hash table with the properties for the provider url, etc. etc. You can see the docs for more details. Here is the link for the EJB Clustering. See the section on EJB

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103//cluster/load_balancing.html

  Hope this helps
  Ravi Jegga

• connection of users and configuration of MAX

  I searched the site for 3 days and finally found a post titled; "IAK login user and configuration MAX" on 04/21/2009 who has asked pretty much the same problem, I'm going to. I wonder if there is something new on this subject because I need a solution.

  I installed an application and the NI FP driver suite see 6.0.11. I run NI MAX and open my. File IAK, which is located in the folder/common directory as well as the executable file of my application. At the beginning I used to hit the 'Save' selection but have found since that it makes no difference, so now, I'm not hitting 'Save', but just close MAX. This process is to record the location of my. IAK file somewhere, because after that my application runs and communicates very well with my e/s.

  The problem comes when I have the new station operators connect to the computer that controls the operation of my test. the application that auto starts because it is in the startup folder "All Users" cannot communicate with inputs and outputs.

  MAXIMUM running and opening the. IAK file under each new user login then immediately closing MAX solves the problem and all is well, and this process must occur the first time that a new user connects to the computer. The post mentioned above indicates that it is a normal behavior.

  The problem is that some of my operators do well to find the power button and turn on all the morning. The application is no "Exit", "Task Manager" should be used to stop it. Login information is stored on a post-it in their portfolio, and ask them to open MAX and save the configuration is just too much for them to do - be unfamiliar with the operation at first.

  Can someone explain to me how to fix this or refer me to a validated solution?

  Thank you

  OK - here it is:

  It works for me under Windows 7 with FP1000 e/s on a serial Comm. port other configurations may or may be not the same in these respects.

  While logged in as a privileged user configure you application to work and communicate with the e/s using an IAK file. Create the IAK via NI MAX.

  Is the key to register of interest here: [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer\Recent File List]

  The string value is: "File1"="C:\ApplicationPath\IOConfigurationFile.IAK."

  Start the REGEDT32 Registry Editor. EXE and navigate to the key just below SOFTWARE that tells of National Instruments.

  Select the key, and then right-click on it. Select EXPORT, select a path and name of the output file.

  There will be many other entries, but this recent file one is the only one that may be necessary.

  You will end up with one. REG file with the specified name that contains the following elements:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\National tools]

  [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer]

  [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer\Recent File List]
  'File1"="C:\\ApplicationPath\\IOConfigurationFile.iak '.

  Create a BAT file under the name of your choice. Configure.BAT for example.

  This BAT file will reside in the directory of your application with your Important file and it will contain 1 line.

  This:

  REG IMPORT "C:\ApplicationPath\ConfigurationRegistryExportFile.REG" > rejconfig.log

  Place a shortcut to it. BAT file in the 'All Users' Start menu.

  Any user who connects will receive this update of the registry which will allow the driver to IO to know how to communicate with your IO.

  Replace your appropriate to the ApplicationPath, IOConfigurationFile, ConfigurationRegistryExportFile, rejconfig.log file names. The log file will be written only for in the case of an error.

  Good luck

  Dfhotz