Configuration of JMS Transport in OSB: uri problems and customization

Similar Questions

• Response time to JMS transport configuratin OSB

  Hello
  
  I put the time field answer either 10 dry in jms enterprise configuration service page.
  
  I want to send a personalized message to the proxy service if business gets no response within 10 seconds.
  
  The custom xml part is
  
  < status > < error > < code > < / code > < message > < / message > < / error > < / status >
  
  How do I get there?
  
  
  Thank you.

  problem seems to be in the action to replace the error handler. Try with below the route node error handler-

  Replace [content of the node] of [..] in [body] with [ ]

  Answer [successfully]

  It works for me. What version of OSB work?

  Kind regards
  Anuj

• &lt; error &gt; &lt; security &gt; &lt; BEA-000000 &gt; &lt; validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync. &gt;

  I'm trying to set up a cluster, I installed my SQL server DB and Weblogic Portal 10.3.2 on two different machines and each thing is correctly configured according to my knowledge.

  but when I am trying to start my node managed on a remote machine, out of sync error continually as shown below

  < 6 sep, 2014 16:42:02 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:07 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:13 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:18 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:24 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  NOTE: I can connect to my DB using java utils.dbping [MSSQLSERVER4 |] MSSQLSERVERB] < db username > < db and user password > DB_Host:Port / Db_name on two physical machines.

  is there no work around for this problem, as I am not able to get around this error and is unable to start my managed computer node.

  Thank you

  Punishes

  Hello

  Notes on MOS:

  It is an issue that occurs because the RDBMS security store configuration problem. In order to synchronize the RDBMS security store data, WLS uses the JMS topic for transport, which is not met in this case and therefore this error. The solution is to configure the JMS topic according to the above reference documentation. However this post ideally is not an error but a simple warning message. Thus, in the context of the code fix, we delivered a patch for WLS, to change the gravity of this message of 'ERROR' to 'WARNING '. This patch can be downloaded using My Oracle Support Portal using:

  Bug number: 13459424

  Patch ID: NF9G

  Emmanuel

• JMS according to the messaging service and the OSB Service account

  Hi forum,
  
  I have a question about the service and the account of JMS Messaging Service.
  
  My OSB service:
  I created a service of OSB that JMS type
  configuration:
  General: email
  E-mail: Request Type: type of XML response: no
  Transport: JMS
  JMS transport: Destination queue. Type, account Service JMS:... (Browse)
  
  
  My requirement is to ensure security to the JMS proxy.
  I saw an option available in the JMS transport is JMS Service account.
  
  I don't have an idea on the use of service accounts in JMS.
  
  one can pls give idea about the JMS service account in JmS.How to ensure safety to jms proxy...
  If you have any documents pls share me
  
  
  Thank you and best regards,
  Krishna.

  In your weblogic console go to your JMS Modules > * JMSModule > * tail > roles > policies. Add a user to the queue. This user must exist in the field of security in the weblogic console.
  Create a service with the same user name password account and use it in your OSB to read or write to the queue.

• JMS transport - weblogic changes &lt; SOAP: address location = "jms:... for http"

  Hello
  Please help me to configure the web service to use only jms transport.
  I try to create the web service that uses JMS transport.
  I started from WSDL where I placed two items:
  < style: = 'document soap binding '.
  transport = "http://www.openuri.org/2002/04/soap/jms" / >
  
  and
  
  < soap: address location = "jms://host:7041/contextPathName/serviceUriName? URI = queueName"/ >
  
  Then in the implementation of the service web, I placed after the annotation:
  @WLJmsTransport (= "contextPathName" contextPath, serviceUri = "serviceUriName", portName = "portName", queue = "queueName", connectionFactory = "connectionFactoryName")
  
  Deployment was successful but when I look at the generated WSDL (Admin console) I see that weblogic has changed < soap: address location = "jms:... for < soap: address location ="http... "
  And when I look at the tracking I see port uses JMS transport.
  When I try to test my service using the client to Test the Admin console I see that the queue is not used (Admin console/monitoring/Messages total is always 0) and (I assume) service uses http transport.

  Hello
  Please change "http://www.openuri.org/2002/04/soap/jms" to http://www.openuri.org/2002/04/soap/jms/ for soap1.1 or http://www.openuri.org/2002/04/soap12/jms/ for SOAP 1.2.

  There must be an incompatibility between code and implementation.

  -LJ

• JMS messaging with OSB

  Hello Forum, so far I was not able to find any useful information so the question:
  
  1. OSB is an implementation of JMS?
  
  2. to use JMS with OSB do I need to install separate JMS? If this is not the case, is installed by itself when installing OSB JMS?
  
  Thank you!

  Oracle uses the Bea Weblogic JMS provider, so when you install OSB (on weblogic) you'll have a JMS engine that is installed too.

  To configure a JMS Module go on Weblogic Console-> (left panel) Services-> e-mail-> JMSModules.

  I hope this helps.
  Pablo

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• MXI-4, Manager of configuration problems and data base, clean install MAX

  Hello

  I have a problem with the MXI-4 kit / PCI-8331

  -C' is a clean install of MAX, using the default installation option.

  -Win XP 32. The PCI-8331 is the only PCI site in PC

  With the GUI of MAX does not, plug-and-play detects the jury.

  If I reboot, connect 8336 PXI and an another Council PXI (6641) in PXI basket, it's OK by PnP display.

  But as soon as I open MAX and expand the tree view of the devices, the Configuration Manager stops.

  I ge the message 'to NOR-PAL service Manager has encounterd a problem and needs to close' and 'MAX expired in the meantime a driver. "

  -J' have removed everything, reinstalled MAX, but the problem remains the same.

  -J' deleted configuration in C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data Dictionaries\Last

  -I see a number of DLLs being re-written there, when I restart MAX, however there is no file config3.max (retrieved the entire disk) as suggested elsewhere.

  -It seems that if I only have the PCI card installed, I still have the same problem.

  I'd like to find if there is a problem with the hardware of the Board of Directors, the BIOS or the installation of MAX?

  Thank you

  Partially solved.

  The PCI-8331 seems to work in another PC, equipped with a newer BIOS.

  Could not test with MXI-8336 a hanging basket, as it is in a different location.

  Uptdating the BIOS of the computer 'defective' did not help, it seems like a new computer/motherboard is necessary.

• Get the following error on reboot of the computer: Windows did not start because of a configuration of the disk of the computer problem

  Original title: where can I download iso windows xp recovery CD

  I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
  Windows did not start because of a configuration of the disk of the computer problem.

  Could not read from the selected boot disk. Check the hardware path and startup disk.

  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  So I need an iso file XP Recovery.
  I can simply copy the iso files on USB and start with usb?

  Hello

  1. don't you make changes on the computer before this problem?

  First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Import of service configurations developed in Interface Web OSB workshop

  Hello world
  
  Is it possible to import service configurations (including the business services, proxy service and other resources and artifacts of the project) that have been developed using the OSB administration Console in the IDE of the workshop.
  
  We currently use Oracle Service Bus 10 g 3.
  
  The previous developer used the console admin almost exclusively to develop service orchestrations, but I prefer to use the IDE of the workshop.
  
  All tips, links, etc... would be greatly appreciated!
  
  Rebecca Janine Wise
  Engineer technical sales lead
  TechSoup Global

  Hello

  This can be done easily. Please note that you must use the workshop which has installed with OSB, this one has the necessary plugins for the Service of Bus resources. The steps are:
  1 export the configuration: sbconfig.jar of the OSB Web Interface
  2. open workshop
  3. go to the file menu and select Import
  4. Select Oracle Service Bus - Configuration JAR, under Oracle Service Bus, and then click Next
  5. under the Information Source, go to the & select the configuration JAR file that you created in step 1. Click Finish. This should do the job

  Thank you & best regards
  Vivek

  Published by: Vivek Nandey on November 8, 2009 21:40

• Buffer problem and cases of ring series

  Hi all

  I had an interesting problem and have a moment that is difficult to find a solution and thought a pair of fresh eyes can help!  I read data during the series using VISA.  That's going well.  I do this continuously and then adding in a string.  This string, I look for new lines and pull them out of the buffer series chain.  I have then look at the lines to see if they have the appropriate orders and, if so, analyze these commands to control a box structure.

  Now, here's the interesting part.  When I started, I wrote a vi to take in an arbitrary multiline string in and analyze data and sentences, and it works as expected, but when I do it with serial data direct and the ring, the case statement buffer does not.  Also, when I probe the parsed string that will control the case statement, it LOOKS right, but the case statement will not accept it.

  Any thoughts would be greatly appreciated, I'm quite confused as to what is happening here.  I have attached the 2 vi.

  Gurus?  Masters?

  Thank you!

  Jim S,.

  I see a few problems.  As previously validated you should use greater or equal? instead of superior?.  The biggest problem is that you have a string constant value '\n', but the constant itself is not configured for '-' code display mode.

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.