Configuration of listener with different name

Similar Questions

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• Save pictures png with different names...

  Hello guys,.

  I'm not so familiar with Labview and I want help. I have a Vi which is actually control 32 RBG lights. We use the DMX Protocol... to each time a directed is on and then we take a picture, then the led goes out. The second goes on then end and on... We have 8leds in 4corners... So, we corner1_led1, corner1_led2 up to corner4_led8. Ultimately, we are 32 saves png pictures. What I want is to record photos with different names and numbers starting from 1 instead of 0... For example, if we choose the white light and save the images in 'News' images will be named 'new_white_0_0' instead of 'new_white_1_1 '. You have an idea how I can change it?

  Attached the names of current photos and Vi.

  Any comments would be useful.

  Thank you.

  The terminal of indexing ([i] in the loop for) starts at 0. When you create your file name, use the primitive "to increment" digital palette. Then your file names will start at 1 instead of 0.

  I noticed your VI that you do a lot of string concatenation to build the path/name of the file, you can use the format string and build the screw to make the somewhat simpler schema. You can also update the deprecated functions (for example, the file open) with modern equivalents.

• How to configure the listener with SSL

  Hi Experts,

  I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

  Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

  The command line configurations will be well appreciated.

  Thanks in advance

  Alexander gelin

  The client configuration is the same as the server:

  1. create the portfolio.

  2 creating CSR and copy it in CA.

  3. the CSR signal with your certificate root.

  4 copy signed CRT file and root of public certificate to the client.

  5 configure the sqlnet.ora clients.

  Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

  In SQLDeveloper, connection string should be like:

  jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• Duplication active with different name of DB

  Hello
  
  I am trying to duplicate a primary database in another server db with different name. On the current database of target duplicate for the eve of the database nofilenamecheck of shooting, I am facing ORA-01103: name "ORADB" in the control of the database file is not "11GDB" error. I tried a few other commands of duplication in surfing the internet, but nothing has worked.
  
  DB primary
  
  name of the data base: ORADB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Watch DB
  
  name: 11GDB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Both the db runs in ASM diskgroup with different name. The watch below the content of the Standby database pfile.
  
  11GDB.__db_cache_size = 314572800
  11GDB.__java_pool_size = 4194304
  11GDB.__large_pool_size = 4194304
  11GDB.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
  11GDB.__pga_aggregate_target = 318767104
  11GDB.__sga_target = 478150656
  11GDB.__shared_io_pool_size = 0
  11GDB.__shared_pool_size = 146800640
  11GDB.__streams_pool_size = 0
  *.audit_file_dest='/U01/app/Oracle/admin/11GDB/adump '
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='+STDBY/11gdb/controlfile/current.260.788911153'
  * .db_block_size = 8192
  * .db_create_file_dest = "+ STDBY.
  * .db_domain = "
  * .db_file_name_convert = '+ DATA', '+ STDBY.
  * .db_name = "11GDB".
  * .db_unique_name = "11GDB".
  *.diagnostic_dest='/U01/app/Oracle '
  *. Dispatchers ='(Protocol=TCP) (SERVICE = 11GDBXDB)"
  *. FAL_CLIENT = "11GDB."
  *. FAL_SERVER = "ORADB".
  * .log_archive_config = 'dg_config = (oradb, 11gdb)'
  * .log_archive_dest_1 = "LOCATION = + STDBY valid_for = (all_logfiles, all_roles) db_unique_name = 11GDB'"
  * .log_archive_dest_2 = "service = ORADB LGWR async valid_for = (online_logfiles, primary_role) db_unique_name = ORADB'"
  * .log_archive_dest_STATE_1 = 'ENABLE '.
  * .log_archive_dest_state_2 = 'ENABLE '.
  * .log_file_name_convert = '+ DATA', '+ STDBY.
  * .memory_target = 796917760
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .standby_file_management = "AUTO".
  * .undo_tablespace = "UNDOTBS1.
  
  Please, someone tell me where it won't.
  
  Kind regards
  007

  The mentioned error the primary SID is ORADB

  Whereas, in the pfile file displayed by you, there name

  * .db_name = "11GDB".

  db_unique_name may be different but db_name should be the same.

  Please make the changes and go ahead and share the output.

• How to listen to a couple of times (with different names) table in another schema?

  Hello guys,.
  
  I replicate a table schema (SCH_1) (TAB_1) on the basis of data source (named DB_1) twice on the schema (SCH_2) on the basis of data target (DB_2) with two different names (TAB_1 and TAB_1_SHORT). TAB_1_SHORT on db target must be a subset (eg. WHERE STATUS = 1) of TAB_1!
  
  How to do? can someone help me?
  
  I tried to realize that in this way:
  
  (1) creation of 1 capture process with the rule 1 table on source db (without any rule of subset to capture all changes) for table TAB_1
  
  (2) creating a process of spreading with no rules
  
  (3) creation 1 apply the process with a rule in table for table TAB_1 without any subset_rule but with the transformation of the pattern of SCH_1 to SCH_2 (DBMS_STREAMS_ADM. RENAME_SCHEMA) = > it works correctly!
  
  (4) creating a subset_rule (WHERE STATUS = 1), a transformation of the pattern of SCH_1 to SCH_2 (DBMS_STREAMS_ADM. RENAME_SCHEMA) and a transformation of tablename from TAB_1 to TAB_1_SHORT (DBMS_STREAMS_ADM. RENAME_SCHEMA) for table TAB_1_SHORT = > does not work, no errors posted in dba_apply_error!
  
  in another chance, I tried to turn the table and the schemaname in the process of capture, with the effect that my first table TAB_1 would not be listened to again.
  
  I don't know what the problem is. I think it must be possible to publish a table for two different targettables in the same pattern on an another db, is not it?
  
  I hope that the greetings
  Flo

  Hello

  Adding a normal table rule and also a subset rule would not work because the rule would be evaluated only once in the set of positive rules. If the normal rule is evaluated first, then the subset rule and the rest of the rules would not be assessed at all that's why it would not work.

  This can be done using one of the following methods:

  Method 1:

  1 use the declarative transformation on the capture/apply and rename SCH_1 to SCH_2 scheme.
  2. now, on the site apply, define a DML for SCH_2.TAB_1 Manager
  3 al ' DML Handler, do the following:
       
  a. get the value of the STATUS column
  b. check if the value of STATUS = 1, if yes, then change the name of the object to TAB_1_SHORT and run the LCR.
  (c) another thing not to change the name of the object (leave it as it is, TAB_1) and run the LCR.
            
  Method 2:

  1. Add a DML for SCH_1.TAB_1 Manager
  2. in the DML handler perform:
       
  method of set_object_owner use of LCR$ _ROW_RECORD to rename the owner at the SCH_2
  b. get the value of the STATUS column
  c. check if the value of STATUS = 1, if yes, then change the name of the object to TAB_1_SHORT and run the LCR.
  (d) another thing not to change the name of the object (leave it as it is, TAB_1) and run the LCR.

  Please let me know if you need examples of code.

  Thank you
  Florent

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• PersistentObject / PersistentStore with different names

  Hi all

  I'm new to PersistentObject... As I've never used...

  As RecordStore can create PersistentObject / PersistentStore with a different name...

  I have a title and under each title, I have a list of things that...

  I want to keep this list with the name of the title as we do in recordStore.

  Is it possible with PersistentStore / PersistentObject

  It will be great for any snippet of code

  Thank you

  Thank you...

  This means that if I do the following

  long MY_DATA_ID = 0x33abf322367f9018L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID);

  long MY_DATA_ID1 = 0x33abf322367f122L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID1);

  long MY_DATA_ID2 = 0x33abf32236723238L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID2);

  This refers to three different objects/storage... we use for the other name RMS... Is it?

• Clonning an ASM database on the same server with different names of sid.

  Hello people!
  
  I tried to clone an existing database on the same host with a different name with no luck.
  
  I tried what 415579,1 reccomends, but, when I reached the RESTORE CONTROLFILE from clause that it fails since this process the old and the new database must be the same. I don't want that. I want a separate copy, not a database of pending. There are other people in the company who will use this database, and I just want to replicate it.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 26/05/2009 14:51:15
  ORA-01103: the name "OLD_DB_NAME" in the control of the database file is not "NEW_DB_NAME".
  
  I want to just clone a database with a different name, in the same way we used to do with ALTER DATBASE BACKUP CONTROLFILE to TRACE-> COPY DB_FILES-> RECREATING CONTROLFILES WITH a DIFFERENT NAME DATABASE.
  
  Exp/imp it's a possible solution, but I wonder if it is just another way to clone an existing database in the same node with a different namedo with RMAN? Just as we used to with BACKUP CONTROLFILE to TRACE-> DBF_FILES-> RECREATING CONTROLFILES WITH DB NAME DIFFERENT COPY.
  
  It's the links I tried to follow without success.
  
  http://www.Oracle.com/technology/deploy/availability/PDF/asm_cloning.PDF
  Duplicate by RMAN 10 g
  
  and many others...
  
  Thanks for your help.
  Alex.

  You'll need an auxiliary copy if you restore the database to a different name.
  Take a look at the following note:
  http://jhdba.WordPress.com/2009/04/02/cloning-a-database-ASM-to-ASM/

• Time Capsule: create networks of 5.0 and 2.4 with different names

  I've got a video doorbell Skybell requiring the 2.4 GHz network have a different name from that of the 5.0 GHz network. Find no way to do it in Airport utility

  Try this: AirPort Utility > select the Time Capsule > change > wireless tab > wireless network name Options > 5 GHz > enter the network name of your choice for radio 5 GHz here. Note: The 2.4 GHz radio network name could be changed under the tab wireless in the wireless network name field.

• Configuration of MRA with different domain name

  Hello

  We are ARM configuration with internal and external domain name different. internal domain is abc.local and external domain abc.com

  C exp, CUCM and IMP are in the area of the abc.local and Exp E found in domain abc.com. users using the [email protected] / * / to connect to jabber.

  So we created external SRV records. (_collab - edge._tsl.abc.com). in internal DNS server, we created _cisco - uds._tcp.abc.local.

  I know, we create _cisco - uds._tcp.abc.com in internal DNS record as well.

  The problem is because we cannot add abc.com area (it will affect the existing ERP Setup) we cannot create the _cisco - uds._tcp.abc.com in our DNS server.

  There is no work around for this?

  Aneesh Abraham

  Take a look in the area to locate in the document below:

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/Windows/9_7/CJ...

• Configure L3 routing with different suppliers

  Hello people, I am not used to work with layer 3 switches, so I need your help:  I have two different sites. Each site has one switch L3 and  networks like the example below:
  
  Switch A (power connect 6224):Network 192.168.0.0 /24
  
  Switch B (Cisco 3560)Network 172.19.16.0 /24network 10.10.10.0 /24
  
  I need to configure both sites to comunicate witch each other. I have the following idea:
  
  - Connect a Cable between two switches- Create a vlan on each switch and configure the ips like below:Switch A: interface ethernet 1/g1 - 10.0.0.2Switch B: interface gigabit 1 - 10.0.0.3- Configure static route on each switch like:Switch A: ip route 172.19.16.0 255.255.255.0 10.0.0.3     ip route 10.10.10.0 255.255.255.0 10.0.0.3Switch B: ip route 192.168.0.0 255.255.255.0 10.0.0.2
  
  Is this possible? Is this configuratios right? If so, do I need to improve something else?
  
  A appreciate any help.
  

  The decisive factor here is going to be if the PowerConnect and Cisco have different Broadcast domains from each other. If they have a separate broadcast domain, then the method you mentioned should work fine. If they share broadcast domains, then you want the physical connection to the two switches in general or Trunk mode, allowing the VLANS on the connection.

• Fillabe in double page with different names filed...

  Hi, I have a form to fill in pages (he has boxes and text fields to fill in). So, I want to duplicate this page. but duplicating all the field names must be unique. I mean I want to make the reliable form of 8 pages using my page to fill gooseberry. but all the fields must be unique. (I enter different details different pages)... I don't know whether it is possible or not. If possible, please help me. Thanks in advance...

  I was looking at using a model of PDF and spawning 8 pages with the parameter rename set to true.

  A lesson in models for Adobe Acrobat by Dave Wraight

• images to recreate a link with different names

  Hi all, I need to be reprinted full - missing - images (i.e. "my_favourite_pic_001_LR.jpg") to their versions of high resolution (i.e. "my_favourite_pic_001_HR.jpg"). So, is there a way to tell InDesign to 'read' all the characters, but the last two before the point, while looking for links? HR images are all in a single folder, so there is no danger to republish the bad. I'm a noob with js or applescript, but I'll be glad if anyone of you could help me

  Hello

  Here's the javascript (place and run from the InDesign Script Panel):

  var
    sourceFolder = Folder.selectDialog("Show me a source folder"),
    mLinks = app.activeDocument.links.everyItem().getElements(),
    cLink, cFile;
  
  while ( cLink = mLinks.pop() ) {
    if (cLink.status == LinkStatus.NORMAL) continue;
    cFile = File(sourceFolder + "/" + cLink.name.replace("LR.","HR.") );
    if ( !cFile.exists ) continue;
    cLink.relink(cFile);
    }
  

  Jarek