Save pictures png with different names...

Similar Questions

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• How I've spread my video into several parts and save each file under different names?

  How I've spread my video into several parts and save each file under different names?

  You are going to need a video editing package to do this, you can not cut just to the top of the video into segments at the file level.

  With an editor, you can then crop the video into segments

• How to open Excel Template save it under a different name and then write and save data to it at intervals of regualar

  I have an excel template that I created. I open this model, save it under a different name and then writing and saving data to a sheet excellent at regular intervals. It gives me an error 5, I understand what it means and I'm working around him.  However, after too many hours trying to figure it out, I asked for any help or input. I've attached an example vi, not the real one because it is very involved.

  Thank you

  
  

• Duplication active with different name of DB

  Hello
  
  I am trying to duplicate a primary database in another server db with different name. On the current database of target duplicate for the eve of the database nofilenamecheck of shooting, I am facing ORA-01103: name "ORADB" in the control of the database file is not "11GDB" error. I tried a few other commands of duplication in surfing the internet, but nothing has worked.
  
  DB primary
  
  name of the data base: ORADB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Watch DB
  
  name: 11GDB
  
  OS: OracleLinux 5
  
  version: 11.2.0.1.0
  
  Both the db runs in ASM diskgroup with different name. The watch below the content of the Standby database pfile.
  
  11GDB.__db_cache_size = 314572800
  11GDB.__java_pool_size = 4194304
  11GDB.__large_pool_size = 4194304
  11GDB.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
  11GDB.__pga_aggregate_target = 318767104
  11GDB.__sga_target = 478150656
  11GDB.__shared_io_pool_size = 0
  11GDB.__shared_pool_size = 146800640
  11GDB.__streams_pool_size = 0
  *.audit_file_dest='/U01/app/Oracle/admin/11GDB/adump '
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='+STDBY/11gdb/controlfile/current.260.788911153'
  * .db_block_size = 8192
  * .db_create_file_dest = "+ STDBY.
  * .db_domain = "
  * .db_file_name_convert = '+ DATA', '+ STDBY.
  * .db_name = "11GDB".
  * .db_unique_name = "11GDB".
  *.diagnostic_dest='/U01/app/Oracle '
  *. Dispatchers ='(Protocol=TCP) (SERVICE = 11GDBXDB)"
  *. FAL_CLIENT = "11GDB."
  *. FAL_SERVER = "ORADB".
  * .log_archive_config = 'dg_config = (oradb, 11gdb)'
  * .log_archive_dest_1 = "LOCATION = + STDBY valid_for = (all_logfiles, all_roles) db_unique_name = 11GDB'"
  * .log_archive_dest_2 = "service = ORADB LGWR async valid_for = (online_logfiles, primary_role) db_unique_name = ORADB'"
  * .log_archive_dest_STATE_1 = 'ENABLE '.
  * .log_archive_dest_state_2 = 'ENABLE '.
  * .log_file_name_convert = '+ DATA', '+ STDBY.
  * .memory_target = 796917760
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .standby_file_management = "AUTO".
  * .undo_tablespace = "UNDOTBS1.
  
  Please, someone tell me where it won't.
  
  Kind regards
  007

  The mentioned error the primary SID is ORADB

  Whereas, in the pfile file displayed by you, there name

  * .db_name = "11GDB".

  db_unique_name may be different but db_name should be the same.

  Please make the changes and go ahead and share the output.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• PersistentObject / PersistentStore with different names

  Hi all

  I'm new to PersistentObject... As I've never used...

  As RecordStore can create PersistentObject / PersistentStore with a different name...

  I have a title and under each title, I have a list of things that...

  I want to keep this list with the name of the title as we do in recordStore.

  Is it possible with PersistentStore / PersistentObject

  It will be great for any snippet of code

  Thank you

  Thank you...

  This means that if I do the following

  long MY_DATA_ID = 0x33abf322367f9018L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID);

  long MY_DATA_ID1 = 0x33abf322367f122L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID1);

  long MY_DATA_ID2 = 0x33abf32236723238L;

  PersistentObject persistentObject = PersistentStore.getPersistentObject (MY_DATA_ID2);

  This refers to three different objects/storage... we use for the other name RMS... Is it?

• When the file is saved in windows 7, save the description with the name of the file by the text file

  I need to save files much but don't have time to write the file name and detailed inform instead. When I want to save the file, windows 7 displays the window requires the file name and type. But I need another box that I can describe the detailed information associated file name. This will generate the text file that detailed information with the name of the file.

  Is there a s/w or windows 7 can do that?

  It is not possible to save a file without a name. You must specify a name for the file. In addition, you can add additional information in the comments of the file area. You can open the section "Comments" by going to the properties of the file and go to the Details tab.

• Save in PNG with transparency

  I'm trying to save a file in Photoshop, change the width and the height of 50%, the resolution to 300 and keep transparency. If I save in .png, it flattens the layers.

  Save as 'Save for Web' works, but for some reason, it changes the resolution to 72 and a width of 37 inches. If I open the image in Photoshop and change the resolution to 300, I get good 8.88 in. width.

  Here's what I have in the script. I'm new to javascript so patient with me.

  	var xMaxFullDimension is activeDocument.width.as ('in');.
  	var yMaxFullDimension is activeDocument.height.as ('in');.
  	activeDocument.resizeImage (new UnitValue(xMaxFullDimension*50/100,'in'), new UnitValue(yMaxFullDimension*50/100,'in'), 300, ResampleMethod.BICUBIC);

  	sfwPNG24(saveFile,100);

  function sfwPNG24 (saveFile, quality) {}

  var pngOpts = new ExportOptionsSaveForWeb;

  pngOpts.format = SaveDocumentType.PNG;

  pngOpts.PNG8 = false;

  pngOpts.transparency = true;

  pngOpts.interlaced = false;

  pngOpts.resolution = 300;

  pngOpts.quality = quality;

  activeDocument.exportDocument (new File (saveFile), ExportType.SAVEFORWEB, pngOpts);

  }

  You can simply use a normal backup rather save for web to keep the 300 dpi. You can use scriptlistener to record all the code.

• How to save a PNG with an alpha right or fat?

  Long story short, work in broadcasting and a new piece of equipment like the png files.  I know how to save png with transparency, is not the problem.  I don't know how or if this is possible is to save with an alpha right or fat.  At the moment we feather or extend the edges to past the alpha to say a logo and save it as tif, psd, or .tga.  This way once it is indexed on video or something else, the edges look good, no bad black border... it is logical, explaining probably not very well.   But move to png files, I have no idea how to do an alpha right or fat because he sees the transparency.  I mean that if I have feathers on the edges, a png will see this right, since there is no alpha?

  I hope this makes sense?

  > If we don't fill the transparent areas and semi-transparent image with the colored part of the image, we have usually get a dirty key/matte or a lot of fringes.

  This means that your other software and hardware is not reading/interpretation of the PNG file correctly.

  PNG saves with everything that is in the pixels in the transparent area - because they are supposed to be transparent and not seen.

  If you see artifacts in the transparent areas, then something is wrong with the software displaying the PNG, because 100% transparent should not be visible at all.

  Almost, it looks like someone could not read the documentation and specifications and try to treat the PNG as premultiplied format.

• Clonning an ASM database on the same server with different names of sid.

  Hello people!
  
  I tried to clone an existing database on the same host with a different name with no luck.
  
  I tried what 415579,1 reccomends, but, when I reached the RESTORE CONTROLFILE from clause that it fails since this process the old and the new database must be the same. I don't want that. I want a separate copy, not a database of pending. There are other people in the company who will use this database, and I just want to replicate it.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 26/05/2009 14:51:15
  ORA-01103: the name "OLD_DB_NAME" in the control of the database file is not "NEW_DB_NAME".
  
  I want to just clone a database with a different name, in the same way we used to do with ALTER DATBASE BACKUP CONTROLFILE to TRACE-> COPY DB_FILES-> RECREATING CONTROLFILES WITH a DIFFERENT NAME DATABASE.
  
  Exp/imp it's a possible solution, but I wonder if it is just another way to clone an existing database in the same node with a different namedo with RMAN? Just as we used to with BACKUP CONTROLFILE to TRACE-> DBF_FILES-> RECREATING CONTROLFILES WITH DB NAME DIFFERENT COPY.
  
  It's the links I tried to follow without success.
  
  http://www.Oracle.com/technology/deploy/availability/PDF/asm_cloning.PDF
  Duplicate by RMAN 10 g
  
  and many others...
  
  Thanks for your help.
  Alex.

  You'll need an auxiliary copy if you restore the database to a different name.
  Take a look at the following note:
  http://jhdba.WordPress.com/2009/04/02/cloning-a-database-ASM-to-ASM/

• How to listen to a couple of times (with different names) table in another schema?

  Hello guys,.
  
  I replicate a table schema (SCH_1) (TAB_1) on the basis of data source (named DB_1) twice on the schema (SCH_2) on the basis of data target (DB_2) with two different names (TAB_1 and TAB_1_SHORT). TAB_1_SHORT on db target must be a subset (eg. WHERE STATUS = 1) of TAB_1!
  
  How to do? can someone help me?
  
  I tried to realize that in this way:
  
  (1) creation of 1 capture process with the rule 1 table on source db (without any rule of subset to capture all changes) for table TAB_1
  
  (2) creating a process of spreading with no rules
  
  (3) creation 1 apply the process with a rule in table for table TAB_1 without any subset_rule but with the transformation of the pattern of SCH_1 to SCH_2 (DBMS_STREAMS_ADM. RENAME_SCHEMA) = > it works correctly!
  
  (4) creating a subset_rule (WHERE STATUS = 1), a transformation of the pattern of SCH_1 to SCH_2 (DBMS_STREAMS_ADM. RENAME_SCHEMA) and a transformation of tablename from TAB_1 to TAB_1_SHORT (DBMS_STREAMS_ADM. RENAME_SCHEMA) for table TAB_1_SHORT = > does not work, no errors posted in dba_apply_error!
  
  in another chance, I tried to turn the table and the schemaname in the process of capture, with the effect that my first table TAB_1 would not be listened to again.
  
  I don't know what the problem is. I think it must be possible to publish a table for two different targettables in the same pattern on an another db, is not it?
  
  I hope that the greetings
  Flo

  Hello

  Adding a normal table rule and also a subset rule would not work because the rule would be evaluated only once in the set of positive rules. If the normal rule is evaluated first, then the subset rule and the rest of the rules would not be assessed at all that's why it would not work.

  This can be done using one of the following methods:

  Method 1:

  1 use the declarative transformation on the capture/apply and rename SCH_1 to SCH_2 scheme.
  2. now, on the site apply, define a DML for SCH_2.TAB_1 Manager
  3 al ' DML Handler, do the following:
       
  a. get the value of the STATUS column
  b. check if the value of STATUS = 1, if yes, then change the name of the object to TAB_1_SHORT and run the LCR.
  (c) another thing not to change the name of the object (leave it as it is, TAB_1) and run the LCR.
            
  Method 2:

  1. Add a DML for SCH_1.TAB_1 Manager
  2. in the DML handler perform:
       
  method of set_object_owner use of LCR$ _ROW_RECORD to rename the owner at the SCH_2
  b. get the value of the STATUS column
  c. check if the value of STATUS = 1, if yes, then change the name of the object to TAB_1_SHORT and run the LCR.
  (d) another thing not to change the name of the object (leave it as it is, TAB_1) and run the LCR.

  Please let me know if you need examples of code.

  Thank you
  Florent

• Time Capsule: create networks of 5.0 and 2.4 with different names

  I've got a video doorbell Skybell requiring the 2.4 GHz network have a different name from that of the 5.0 GHz network. Find no way to do it in Airport utility

  Try this: AirPort Utility > select the Time Capsule > change > wireless tab > wireless network name Options > 5 GHz > enter the network name of your choice for radio 5 GHz here. Note: The 2.4 GHz radio network name could be changed under the tab wireless in the wireless network name field.

• Configuration of listener with different name

  Hello friends,
  
  I am trying to configure a listener which will run on any port (could be also 1521), but with one name other than the default (the LISTENER). The database is in 11 GR 2. I created the listener.ora file and changed the file init.ora with LOCAL_LISTENER = MYLISTENER. Whenever I am trying to connect to the TCP data it gives me error ORA-12514:...
  
  Also when I am trying to start my database with file pfile it gives me following error:
  
  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
  ORA-00132: error syntax or network name not resolved "MYLISTENER".
  
  Then Listener.ora file is as below:
  
  MYLISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = hostname1) (PORT = 1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = TESTDB)
  (ORACLE_HOME = / u01/oracle/oraapp)
  )
  )
  ADR_BASE_LISTENER = / u01/oracle
  
  
  TNSNAMES.ora file is as below:
  
  
  $ cat /u01/oracle/oraapp/network/admin/tnsnames.ora
  tnsnames.ora # Network Configuration file: /u01/oracle/oraapp/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  = TESTDB
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = hostname1) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = TESTDB)
  )
  )
  
  
  Please help me with the right solution.
  
  -Best regards,.
  Saha
  
  Published by: j_DBA_saha on November 16, 2012 07:58

  Thank you very much. He worked as the way in which you advised.

  -Best regards,.
  Saha

• Save the file with different settings

  So I that I continue to have to apply the same steps for PDF files. I'm not really terrible with programming. I wrote 2 tools using the trustedSave MenuItem. I have 2 different tools created. I commented in the steps, I'm not sure whether or not are possible. I have the book in the api, but still, I'm not a programmer... I fall through the best that I can

  // TO SAVE WEB FILE
  app.addMenuItem({
      cName: "trustedSave",
      cUser: "Save SIS File",
      cParent: "Tools",
      cExec: "saveSisFile();",
      nPos: 0
  });
  
  
  function saveSisFile() {
      app.beginPriv(); {
          // EMBED ALL PAGE THUMBNAILS
          // USING SMALLEST FILE SIZE FROM PDF OPTIMIZER
          this.saveAs("~/Desktop/" + this.documentFileName.substring(0, 11) + '_SIS.pdf');
      }
      app.endPriv();
  }
  
  
  // TO SAVE TILED FILE
  app.addMenuItem({
      cName: "trustedSave",
      cUser: "Save P File",
      cParent: "Tools",
      cExec: "savePFile();",
      nPos: 0
  });
  
  
  function savePFile() {
      app.beginPriv(); {
          // EMBED ALL PAGE THUMBNAILS
          // DELETE PAGE 1
          // PRINT - TILE LARGE PAGES - WITH 0.5" Overlap
          this.saveAs("~/Desktop/" + this.documentFileName.substring(0, 11) + '_P.pdf');
      }
      app.endPriv();
  }
  
  
  
  
  

  Acrobat 8 Pro, Windows 7 64 bit machine

  Maybe when you use for this batch sequences.