Configuration of remote access when creating project
My web server is published on another pc, I can't create the project on the server.
I need to create the project on the other pc. So how can I set properties 'project server?
You can avoid any setting and configure the remoteObject channels to reach the server.
var amf: AMFChannel = new AMFChannel();
AMF. URL = Server:port/contextRoot/messagebroker/amf.
ro.channelSet.addChannel (amf);
The configuration of remote access must set the default channel under the authority of financial markets
See web for details on parameters of remotingConfig
Tags: Flex
Similar Questions
-
My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.
Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.
I hope this can help.
-
How to configure VPN remote access to use a specific Interface and the road
I add a second external connection to an existing system on a 5510 ASA ASA V8.2 with 6.4 AMPS
I added the new WAN using another interface (newwan).
The intention is to bring more internet traffic on the new road/interface (newwan), but keep our existing VPN using the old interface (outside).
I used the ASDM GUI to make changes and most of it works.
That is to say. The default route goes via (newwan)
Coming out of a VPN using a site to character the way previous (out) as they now have static routes to achieve this.
The only problem is that remote incomming VPN access Anyconnect do not work.
I put the default static route to use the new interface (newwan) and the default tunnel road be (outside), but that's the point is will not...
I can either ping external IP address from an external location.
It seems that the external interface doesn't send traffic to the - external interface (or at least that's where I think the problem lies). How can I force responses to remote VPN entering IPS unknown traffic to go back on the external interface?
The only change I have to do to make it work again on the external interface is to make the default static route to use external interface. Calling all internet traffic to the (external connection) original
Pointers appreciated.
William
William,
As it is right now that you will not use the same interface you have road to terminate remote access unless you know their IP addresses by default.
In one of the designs that I saw that we did something like that.
(ISP cloud) - edge router - ASA.
The edge router, you can make PAT within the interface for incoming traffic on port udp/500 and UDP/4500 (you may need to add exceptions to your L2L static) of the router. It's dirty, I would not say, it is recommended, but apparently it worked.
On routers, this kind of situation is easily solved using VRF-lite with crypto.
M.
-
Photos crash when creating project
All the
Ive recently updated to El Capitan, nit course if that is the problem or not but Im going to ask the question. IM aware there are some threads about photos crashing, but none seems to be similar to mine
Ive just returned from a trip and try to create photo books.
All right, but then every now and then I get the spinning beachball colorful and it will not stop. I have to force eject to get the app working again.
Ive tried to fix the photo library and ive also deleted and re-imported into a time machine to the top
Not sure if Im something wrong or not, but its really fustrating. Neve had this problem with Iphoto (the old app) does not seem to be updating photos, then El Capitan
Someone at - it ideas?
Ive just returned from a trip and try to create photo books.
All right, but then every now and then I get the spinning beachball colorful and it will not stop. I have to force eject to get the app working again.
You try to use maps on your Photo Books?
It was reported that the addition of more of two cards will make pictures crash. Test, if you create a book, if you do not add more than two cards.
-
No remote access after you activate the Radius AAA
Hello
I can't access our catalyst 4006 after activating the AAA for RADIUS. I have install IAS on our domain controller configuration / a catalyst as a Radius client and configured a remote access policy that points to an ad group to allow access to the switch. When I try to connect to catalyst by my user information in AD, it seems to crash after I type my password, asks for the password again, then says access denied. This happens both on the console and through a telnet session. I have included below the configuration of my AAA.
What Miss me?
Tim
(Cisco IOS 12.2 v software (25) EWA14)
AAA new-model
!
RADIUS-server host 10.100.x.x auth-port 1812 acct-port 1813 key xxxxxxxxxx
Server RADIUS ports source-1645-1646
!
AAA Radius Server Group server RADIUS
Server 10.100.x.x auth-port 1812 acct-port 1813
!
AAA authentication login default group local line Radius servers
the AAA authentication enable default group, select Radius servers
Authentication servers-Radius AAA dot1x default group
Group AAA authorization exec default for authenticated if Radius servers
Group AAA authorization network default Radius servers
AAA dot1x default arrhythmic accounting Radius Servers group
AAA accounting by default start-stop group Radius servers directly
!
line vty 0 4
by default the authentication of connection
Tim
I think that the immediate problem is that the source address of your switch ussed is not address who is pregnant with Ray. The Radius Server is 10.100.182.250 and it is in the subnet of the interface vlan 182. If the address of the interface vlan 182 will be the source address of the Radius request. Difficulty which is to use the command of source ip range address and specify the address at which you want the switch to be used. Of course, in the short term, it would be easier to change the Radius Server to wait 10.100.182.2 as the address of the customer.
HTH
Rick
-
ASA 5510 vpn remote access - must now be added vpn site-to-site.
We currently have a configuration of remote access vpn and all this hard work.
I need to configure a vpn lan lan 2 now.
Can someone point me to the documentation on that? I used the command line to add a site to site and wrong on it and disconnected me when I applied the crypto map to the external interface. Do I need another card encryption or should I use my existing?
Shannon,
Please see the below URL for more configuration information. Even if that configuration is dynamic to static IPSEC, you can use the concept to build the Tunnel L2L with static IP.
Let me know if it helps.
Kind regards
Arul
* Please note all useful messages *.
-
Routing and remote access to the Server 2003
I configured the remote access and routing service in my Server 2003 duly NAT enabled. All my clients are not in the field. All use internet and intranet connection using my proxy authentication provided by the administrator of the proxy server. I would like to restrict the clients except intranet connection. How to limit the customer?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Service of ASA module does on 6509-E support remote access VPN?
I'm having a problem of configuration of remote access VPN (SSL, Anyconnect ect.) on the Module of ASA Service on 6509-E. It is even supported or I'm wasting my time trying to do something that won't work in a first place :) to work? Site-to-Site works without any problem.
Technical info:
6509-E current SUP 2 t SY 15.1 (2)
Module of ASA - WS-SVC-ASA-SM1 running of the image - asa912-smp-k8 & asdm-712
Licenses on ASA:
Encryption--Activated
3DES-AES-Encryption - enabled
Thank you for the support.
You run multiple context mode?
If you are, access remote VPN only is not supported in this case:
"Note several context mode only applies to the IKEv2 and IKEv1 site to another and applies not to the AnyConnect, clientless SSL VPN, the legacy Cisco VPN, native VPN client client of Apple, the VPN client from Microsoft or cTCP for IKEv1 IPsec."
-
Configuration of remote VPN on 2811 boredom
I try to configure VPN remote access for customers, but could not connect remotely using Cisco VPN client. This is the current configuration on the router. I think I'm almost there and may miss a few commands. Thank you very much for the research.
Current configuration: 4758 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
FCC-1811-router host name
!
boot-start-marker
boot-end-marker
!
enable secret 5 XXXX
!
AAA new-model
!
AAA authentication login vpnauthen local
AAA authorization vpnauthor LAN
!
AAA - the id of the joint session
!
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 10.35.5.1 10.35.5.49
DHCP excluded-address IP 10.35.5.100 10.35.5.254
DHCP excluded-address IP 10.35.10.1 10.35.10.9
!
FCC-Admin dhcp IP pool
import all
Network 10.35.5.0 255.255.255.0
router by default - 10.35.5.1
!
pool IP dhcp FCC comments
import all
Network 10.35.10.0 255.255.255.0
router by default - 10.35.10.1
!
IP domain name faithcountrychapel.net
inspect the IP router-traffic tcp name FW
inspect the IP router traffic udp name FW
inspect the IP router traffic icmp name FW
inspect the IP dns name FW
inspect the name FW ftp IP
inspect the name FW tftp IP
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
voice-card 0
No dspfarm
!
username secret privilege 15 5 XXXX XXXX
username secret privilege 15 5 XXXX XXXX
username secret privilege 15 5 XXXX XXXX
!
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto FCCVPN
key XXXX
pool vpnpool
!
Crypto ipsec transform-set esp-3des esp-md5-hmac vpnset
!
Crypto-map dynamic dynmap 10
Set transform-set vpnset
!
card crypto client vpnmap of authentication list vpnauthen
card crypto isakmp authorization list vpnauthor vpnmap
client configuration address card crypto vpnmap answer
vpnmap 10 card crypto ipsec-isakmp dynamic dynmap
!
interface Loopback0
IP 172.16.1.1 255.255.255.240
!
interface FastEthernet0/0
DHCP IP address
IP access-group ENTERING
NAT outside IP
inspect the FW on IP
no ip virtual-reassembly
automatic duplex
automatic speed
No cdp enable
vpnmap card crypto
!
interface FastEthernet0/1
no ip address
automatic duplex
automatic speed
No cdp enable
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
IP 10.35.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.5
encapsulation dot1Q 5
IP 10.35.5.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.10
encapsulation dot1Q 10
IP 10.35.10.1 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
!
IP local pool vpnpool 10.35.5.200 10.35.5.254
no ip forward-Protocol nd
IP http server
no ip http secure server
overload of IP nat inside source list NAT interface FastEthernet0/0
!
IP extended INBOUND access list
permit any any icmp echo response
allow all all unreachable icmp
allow icmp all once exceed
permit tcp any any eq 22
allow tcp any a Workbench
allowed UDP any eq field all
allow udp any eq bootps any eq bootpc
NAT extended IP access list
IP 10.35.5.0 allow 0.0.0.255 any
IP 10.35.10.0 allow 0.0.0.255 any
!
access-list 100 permit udp any eq bootpc host 255.255.255.255 eq bootps
access-list 100 permit udp host 0.0.0.0 eq bootpc host 10.35.5.1 eq bootps
access-list 100 permit udp 10.35.10.0 0.0.0.255 eq bootpc host 10.35.5.1 eq bootps
access-list 100 deny tcp 10.35.10.0 0.0.0.255 any eq telnet
access-list 100 deny ip 10.35.10.0 0.0.0.255 10.35.5.0 0.0.0.255
access-list 100 deny ip 10.35.10.0 0.0.0.255 10.35.1.0 0.0.0.255
access ip-list 100 permit a whole
!
control plan
!
Line con 0
password 7 XXXX
line to 0
line vty 0 4
transport input telnet ssh
line vty 5 15
transport input telnet ssh
!
Scheduler allocate 20000 1000
!
end
It should probably add this to your INBOUND acl
allow udp any any eq isakmp
permit any any eq 4500 udp
allow an esp
-
How to use ACS 5.2 to create a static ip address user for remote access VPN
Hi all
I have the problem. Please help me.
Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.
I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:
1Ajouter step to attribute a static IP address to the user attribute dictionary internal:
Step 2select System Administration > Configuration > dictionaries > identity > internal users.
Step 3click create.
Static IP attribute by step 4Ajouter.
5selectionnez users and identity of the stage stores > internal identity stores > users.
6Click step create.
Step 7Edit static IP attribute of the user.
I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.
so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.
Wait for you answer, no question right or not, please answer, thank you.
There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached
-
How to configure VPN 3000 Concentrator for remote access
I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling. Private interface is configured as 192.168.1.240/24. Public interface is configured as one of my public IP addresses. I have a public IP pool on the back side of a cable modem Roadrunner. I created a pool of addresses for clients such as 192.168.1.200 by 192.168.1.205. I created all group configurations, group and user base.
In the IP Routing tab, I see a default route pointing to my IP address of public gateway - the IP address of my box of roadrunner cable modem gateway.
Since my VPN client, I am able to connect to the VPN concentrator. I get an address from the pool and check the details of the tunnel under the statistics section shows IP address correct pool for the customer and the correct public IP address of my VPN reorga
Jeff,
According to statistics, it seems that the client sends traffic to the hub, but his answer not get back.
We need check the hub settings itself.
I need check the hub settings and that it is a GUI based device so I can't even ask to see the technology and the only option available is to WebEx.
You're ok with webex, pls lemme session comfortable time id and e-mail to send the invitation, it takes no more time and we will carry it out
Thank you
Ankur
-
Hi allIf I create the project using business process 'Request for project' and when we opened the project, we can see "Project delivery" and "Cost control" mode records.
But when I create project directly in the workspace of society (Admin mode) > company sponsored Shell > project, either by directly or copy model or another project.
We are not able to see above two folders in user mode.
I had checked to access control, there are access avalible for all project users to the two folder in user mode.
Help, please.
The project administrator mode.
Implement > BPs
Add in your Bps and enable and configure workflow settings.
Glad that the other worked ok now.
I hope this helps.
-
ODA IP ASA when you browse the web via remote access vpn
Hi all
I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA, when browsing.
The firmware version of the ASA is 9.1 (6)
Thanks in advance
Hello
What you want to achieve is calles u-turn.
You must enable the feature allowed same-security-traffic intra-interface
For the configuration of the asa, here's the Cisco documentation (I don't copy paste on the post):
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...
Thank you
PS: Please do not forget to rate and score as good response if this solves your problem
-
Bad VPN ASA injection road on OSPF when using remote access
Has anyone ever seen the ASA by inserting a bad road in a connection that has been set up with it? I'll explain more below:
I'm using a reverse road Injection. When access remotely with IPSEC (CLIENT) connects to the camera ASA, ASA create a static route to the remote access to the closest router for the SAA to come to this remote access. This itinerary is distributed on OSPF. OK, it may be a normal situation. But, the problem is when I ask another participant of this OSPF area, which is the road to this remote access (CLIENT), the answer is the router closer to the ASA and don't have to ASA. Does anyone have a solution for this? I tried to create a roadmap but that you did not.
If I understand your question, my question for you is whether the OSPF route to the remote VPN client is source by ASA or another device?
Is the IP address in the space I wrote ASA_ROUTER_ID ASA router ID or it is the router from another device ID? What I've listed below are an example of the output of "show ip route. The value in bold must be ASA router ID, if she is from the road to the VPN client. Other OSPF routers will forward packets destined to VPN to ASA client.
#sh ip route 1.1.1.0
Routing for 1.1.1.0/24 entry
Known through the "ospf 1", metric 110, distance 310, type intra zone
Last updated on GigabitEthernet0 1.2.2.2, 2w there
Routing descriptor blocks:
* 1.2.2.2, ASA_ROUTER_ID, there is, through GigabitEthernet0 2w
Path metric is 310, number of shares of traffic 1 -
Difficulty accessing 1 remote desktop when connected with VPN
Hello world
I have an ASA 5505 and have a problem where when I connect via VPN, I can RDP into a server using its internal address but I can't RDP to another server using its internal address.
One that I can connect to a an IP of 192.168.2.10 and I can't connect to a a 192.168.2.11 on 3390 port IP address.
The two rules are configured exactly the same except for the IP addresses and I can't see why I can't connect to this server.
I am also able to connect to my camera system with an IP on port 37777 192.168.2.25 and able to ping any other device on the network internal.
I also tried ping he and Telnet to port 3390 without success.
Here is the config.
ASA 4,0000 Version 1
!
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.2.2 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
10.1.1.1 IP address 255.255.255.0
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the OWTS-LAN-OUT object
10.1.1.10 range 10.1.1.49
network of the OWTS-LAN-IN object
Subnet 192.168.2.0 255.255.255.0
service of the RDP3389 object
service destination tcp 3389 eq
Description of DC
the object SERVER-IN network
host 192.168.2.10
network of the SERVER-OUT object
Home 10.1.1.50
network of the CAMERA-IN-TCP object
Home 192.168.2.25
network of the CAMERA-OUT object
Home 10.1.1.51
service object CAMERA-TCP
Service tcp destination eq 37777
the object SERVER-Virt-IN network
Home 192.168.2.11
network of the SERVER-Virt-OUT object
Home 10.1.1.52
service of the RDP3390 object
Service tcp destination eq 3390
Description of VS for Master
network of the CAMERA-IN-UDP object
Home 192.168.2.25
service object CAMERA-UDP
Service udp destination eq 37778
the object OWTS LAN OUT VPN network
subnet 10.1.1.128 255.255.255.128
the object SERVER-Virt-IN-VPN network
Home 192.168.2.11
the object SERVER-IN-VPN network
host 192.168.2.10
the object CAMERA-IN-VPN network
Home 192.168.2.25
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
implicit rule of access-list inside1_access_in Note: allow all traffic to less secure networks
inside1_access_in of access allowed any ip an extended list
outside_access_in list extended access allowed object RDP3389 any host 192.168.2.10
outside_access_in list extended access allowed object RDP3390 any host 192.168.2.11
outside_access_in list extended access allowed object CAMERA TCP any host 192.168.2.25
outside_access_in list extended access allowed object CAMERA UDP any host 192.168.2.25
pager lines 24
Enable logging
exploitation forest-size of the buffer 10240
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
local pool RAVPN 10.1.1.129 - 10.1.1.254 255.255.255.128 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT static destination SERVER-IN-VPN SERVER-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
NAT static destination of CAMERA-IN-VPN VPN-IN-CAMERA (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
NAT static destination of SERVER Virt-IN-VPN-SERVER-Virt-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN
!
network of the OWTS-LAN-IN object
NAT dynamic interface (indoor, outdoor)
the object SERVER-IN network
NAT (inside, outside) Shared SERVER-OUT service tcp 3389 3389
network of the CAMERA-IN-TCP object
NAT (inside, outside) static CAMERA-OFF 37777 37777 tcp service
the object SERVER-Virt-IN network
NAT (inside, outside) Shared SERVER-Virt-OUT 3390 3390 tcp service
inside1_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 10.1.1.2 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP
DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = SACTSGRO
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 192.168.2.0 255.255.255.0 inside
Telnet timeout 15
SSH 192.168.2.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 15
dhcpd auto_config inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
username admin privilege 15 xxxxx encrypted password
attributes of user admin name
VPN-group-policy DfltGrpPolicy
type tunnel-group CTSGRA remote access
attributes global-tunnel-group CTSGRA
address RAVPN pool
IPSec-attributes tunnel-group CTSGRA
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:0140431e7642742a856e91246356e6a2
: end
Thanks for your help
Ok
So, basically, you set up the router so that you can directly connect to the ASA using the Cisco VPN Client. And also, the goal was ultimately only allow traffic to the LAN through the VPN Client ONLY connection.
It seems to me to realize that you have only the following configurations of NAT
VPN Client NAT0 / free of NAT / identity NAT
the object of the LAN network
Subnet 192.168.2.0 255.255.255.0
network of the VPN-POOL object
subnet 10.1.1.128 255.255.255.128
NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL
The NAT configuration above is simply to tell the ASA who don't do any type of NAT when there is traffic between the network 192.168.2.0/24 LAN and VPN 10.1.1.128/25 pool. That way if you have additional hosts on the local network that needs to be connected to, you won't have to do any form of changes to the NAT configurations for customer VPN users. You simply to allow connections in the ACL list (explained further below)
Failure to PAT
object-group network by DEFAULT-PAT-SOURCE
object-network 192.168.2.0 255.255.255.0
NAT automatic interface after (indoor, outdoor) dynamic source by DEFAULT-PAT-SOURCE
This configuration is intended just to replace the previous rule of PAT dynamic on the SAA. I guess that your router will do the translation of the ASA "outside" IP address of the interface to the public IP address of routers and this configuration should allow normal use of the Internet from the local network.
I suggest you remove all other NAT configurations, before adding these.
Control of the VPN clients access to internal resources
Also, I assume that your current VPN client is configured as full Tunnel. In other words, it will tunnel all traffic to the VPN connection, so that its assets?
To control traffic from the VPN Client users, I would suggest that you do the following
- Set up "no sysopt permit vpn connection"
- This will change the ASA operation so that connections through a VPN connection NOT allowed by default in order to bypass the ACL 'outside' interface. So, after this change, you can allow connections you need in the 'outer' interface ACL.
- Configure rules you need for connections from VPN clients to the "external" ACL interface. Although I guess they already exist as you connect there without the VPN also
I can't say this with 100% certainty, but it seems to me that the things above, you should get to the point where you can access internal resources ONLY after when you have connected to the ASA via the connection of the VPN client. Naturally take precautions like backups of configuration if you want to major configuration changes. If you manage remotely the ASA then you also also have the ability to configure a timer on the SAA, whereupon it recharges automatically. This could help in situations where a missconfiguration breaks you management connection and you don't have another way to connect remotely. Then the ASA would simply restart after that timer missed and also restart with the original configuration (as long as you did not record anything between the two)
Why you use a different port for the other devices RDP connection? I can understand it if its use through the Internet, but if the RDP connection would be used by the VPN Client only so I don't think that it is not necessary to manipulate the default port 3389 on the server or on the SAA.
Also of course if there is something on the side of real server preventing these connections then these configuration changes may not help at all.
Let me know if I understood something wrong
-Jouni
- Set up "no sysopt permit vpn connection"
Maybe you are looking for
-
My volume on my laptop is extremely low!
My Entertainment PC HP Pavilion dv6-6c10us volume is so low I hardly hear it! Listening to music and watching videos or movies are extremely frustrating because I can barely hear the sound. I did a test of its scope. All sounds are at maximumsettings
-
Hi people - my video cable has deteriorated for months - red screen etc. - Ive tried to replace it, but I received a strange burning smell, and now there is no image on the screen at all - advice please? I can't find a video tutorial of how to do to
-
get the keychain to remember passwords
Recently I had to reset my keychain and now every mail few minutes, or safari, or all I asking my Keychain password. How to I remember Keychain passwords? THX evarita
-
Portege M405: Programming for Toshiba accelerometer API software
I am interested in the programming of an application that would be able to use my computer's built-in accelerometer Computer: Toshiba Portege M405 Tablet (w / HDD protection against shock)Language: C# or Visual Basic I'd be grateful if someone would
-
Impression of the objects when you use Adobe Acrobat Reader DC?
Using Adobe Acrobat Reader DC and objects (like an arrow and a cloud) that I added in his comments do not print. Is there a setting somewhere that I have to change? I tried to change my printer settings to include "print image", but it does not work