get the keychain to remember passwords
Recently I had to reset my keychain and now every mail few minutes, or safari, or all I asking my Keychain password.
How to I remember Keychain passwords?
THX
evarita
Please, back up all data before proceeding.
Launch the Keychain Access application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain in the list on the left side of the Keychain Access window. If your default keychain has a different name, select it.
If the lock icon in the upper left corner of the window indicates that the keychain is locked, click on to unlock. You will be asked the Keychain password, which is the same as your login password, unless you have changed it.
Make a right click or Ctrl-click on the login entry in the list. In the menu that appears, select
Change settings for Keychain 'login '.
In the sheet that opens, uncheck the two boxes, if not already checked.
If you use iCloud Keychain, open the iCloud preferences window and uncheck the box for Keychain. You will be prompted to delete the keychain local iCloud. Confirm. Then re-check the box. Follow one of the procedures described in this article to support to implement the iCloud Keychain on an additional device.
Tags: Notebooks
Similar Questions
-
Why is the box to remember password is gray? It used to work now it won't save them.
Why is the box to remember password is gray? It used to work now it won't save them.
This could be because you have set Firefox not remember the history. Who did you intentionally? It is defined in the Options dialog box:
"3-bar" menu button (or tools) > Options > privacy
Maybe it would work if you choose "Use the custom settings for history" and not to turn off specific things that you want to disable.
A little luck?
-
[MAF] How to get the user name and password after login?
Hi Experts,
I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.
Authentication has been made with OAuth.
I believe that there is an API to get the user name and password in the CRG
See you soon,.
Hendry
Hello.
You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.
To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732
In addition, you must attach the policy of security appropriate to the connection, as explained here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697
Best regards
Frédéric Desbiens
Senior Product Manager
Mobility and Cloud oracle
Twitter: @BlueberryCoder
-
Can not set the options/security / "remember passwords box" it is off I guess?
passwords box is 'grey '.
also I can no longer go back a screen by clicking the arrow to the left on the line that has the http address
who just started so I need new updated? IM on 19.0.1Make sure that you are not Firefox running in (permanent) private browsing mode.
- Tools > Options > Privacy: use the custom settings for history
- Uncheck the box: [] "always use the navigation mode private.
If you use the software Norton then see:
-
lose the setting to "remember passwords" when to stop
Firefox does not record 'Remember password' setting on reboot. Resets to disabled.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
See also:
-
No access to the dialog box remember password
Experienced troubleshooting helps the steps and nothing. No, I'm not private browsing (nothing to hide), and all the settings are correct.
The latest version of FF on a new machine (Dell XPS17). I do not get a password dialog box do not forget when I go to my normal password required sites. I have the key to the left of the address bar icon. I can click on it throughout the day and all over the place, but never the password dialog box pops up.
The machine came with McAfee installed, but I never activated. The password problem existed from the moment wherever I installed FF while McAfee was still here. Since then, I uninstalled McAfee and installed a real antivirus (AVG). There is no settings in AVG that remove password records and McAfee has disappeared. I even checked to see if the problem of password in FF existed between McAfee and AVG, and he did. So there must be a problem somewhere between FF13 and Win7.
Any ideas?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
Try turning off hardware acceleration.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
See also:
-
In IOM after expiration of the user password gets after certain number of days, is there any task/project OOTB in IOM which disables / deletes the user automatically.
Thank you
We had to write our own task to disable the user after than XX days since
password expiration (r2ps2)
-
the question then remember password cannot hide for long time
Fix it
not to hide the password do not forget the box for a long time
PHOTO QUESTIONHello
Please check if this happens in Safe Mode.
Troubleshooting Extensions and themes
Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.
-
What I have to do. I ahm runing a HDD test through the Setup utility. Error of a hard drive failure. Does this mean that I lost everything on my computer? I need to replace the hard drive?
HP G60 laptop
p/n nbo41ua #aba
You can take it to a repair center and they will return for you. You can also remove the hard drive and connect it to another computer to back up data (recommended for pros).
If you have a high-capacity USB flash drive or external hard drive, you may be able to use the Recovery Manager HP back up files. You must press F11 when the computer is turned on (when you see the HP logo) to enter the Recovery Manager.
There is no guarantee that all or part of your data can be saved from the HARD part is defective drive... Just try to do the first chance you get. -
locked out
If you have created a reset before disk or you can log on as "Administrator", you can follow the steps detailed in this Document Microsoft Online:
http://support.Microsoft.com/default.aspx/KB/321305... If you actually cannot log on as an administrator or if you do not actually create a reset disk in the past then, unfortunately, you would be well advised to reinstall the operating system as there is no mechanism in place to recover a lost password. This, of course, is normal for a good reason. -
How to get the RA media server password in Windows 7
When I bought, after I have install windows 7 now for something in the installation he wonder about ra media server password, plese help if you have an answer for this mine was vista Home premium.
See if this thread is useful:
http://social.answers.Microsoft.com/forums/en-us/w7security/thread/4ddb919f-9A2A-4017-b825-88d66cc7b7b0
"RA Media Server Administrator Password". -
I'm new to numbers but were mainly use it to organize only a simple way to display the cases that arise in a criminal background check. So for a table, I can type driving while license revoked (DWLR) as the load and from there on the charge will fill itself or offer similar responses after typing a single key. A well appreciated time saver but problems I can sort and summarize the criminal history for 10 people or more at a time and need to do it urgently often. However when I opened a new table I have to cross and type a new the precise wording of a charge, its disposal (Guilty, voluntary dismissal etc.) and just know that there is an easy way for the numbers to know in a new table that, if finished it is a list annoyingly long term broken criminal code list and do not have to do that in each new table so that it can take. I know I'm missing something very basic, but any help would save hours for me and the other poor interns who spend twice as long just to undestand the case and troubleshoot. Thanks for all the ideas!
David
Hi D,
The AutoComplete feature provides suggestions picked on data entered in the cells above the one you are working in. You can automate the process by preparing a "full menu" table containing ALL the possible inputs for each column in the rows below the header lines.
The checkbox in cell A1 is a switch, is used to insert the word HIDE in the cell that contains the list of AutoComplete terms. Cells in this area are filled with bright red to draw attention to them when indicated.
A rule to reorganize (shown and applied below) hiding these lines when the box is checked.
Hide the lines does not affect the operation of auto-complete, as shown in the table below:
When the form is competed, action depends on how the result will be recorded and filed.
If there is no need to edit/modify the file, it can be converted to a PDF using the print dialog. This produces a copy of the displayed part of the document only.
If the document will require more editing, you can remove the lines containing AutoComplete suggestions. Clear the check box, select all the red lines filled, click the triangle in the row reference tabs and choose Remove.
Formula in A2 - A10: = IF(A$1,"HIDE","")
Kind regards
Barry
-
Presario cq62: I get the admin disabled 62203892 password system can help you
I have a compaq presario CQ62 and have a problem admin password and become system disable 62203892 can someone help?
Hello
Enter: 73161214
Kind regards
DP - K
-
Remember passwords box grayed out. How to check the box?
When I started using the newest Firefox browser with my HP desktop computer, with Windows 8.1, I'd get a popup asking if I wanted the name of the Web site and the password to be saved. It worked fine for awhile, but now I have no popup message asking if I want to recorded information. In addition, on the page with the saved current info the box asking "Remember passwords for Sites" is grayed out. Can someone tell me please how to fix this problem, so I want to type in the info at the signing mainly Facebook and games sites. Thank you
Hello, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).
-
I don't select remember passwords for sites after removing the password
The checkbox for remembering passwords is not a direct field in the options. I try uninstall/reinstall as I can't find anything about it in the forums.
You use permanent Private Browsing?
https://support.Mozilla.org/en-us/KB/private-browsing-use-Firefox-without-history#w_what-does-private-browsing-not-save
Passwords: no new password is saved. the option is grayed out =
Maybe you are looking for
-
My Favorites are not synchronized
I tried to reset
-
How to find and use the "disposable" email addresses
Sometimes, I get a notice at the bottom of the screen that I can use disposable or disposable email addresses if I don't want to use my regular. I don't know how to do this in the help sections.
-
WNR2000v4 continues to change the internal ip address
Hello For some time, I have a strange problem with my WNR2000v4. time to time the Exchange Router ip address internal of himself. The standard/default ip address is 192.168.1.1, but for some reason any change the router to 10.0.0.1. According to the
-
I have this vi, in which I want to use an anova 1 d, but I always get NaN values. I tried the example here: http://forums.ni.com/t5/LabVIEW/1D-ANOVA/td-p/702716/page/2, but I still can't make it work. Can someone help me please? Thank you.