Configuration of survival in the Disqualification process

Similar Questions

• The Disqualification process

  I'm looking for help to improve our Disqualification process.

  Below is a brief overview of our process:

  We have 10 process we use potentially in a job.

  We never want to use 10 processes in a work so according to our requirements we toggle the process that we want to execute.

  To do this, we export to a csv file that is shared on the server of the Disqualification after that each process is running.

  The next step then reads from this common file.

  The problem is that limits our ability to run our processes with more than 56 k lines related to the use of the csv

  Included in a job is it possible that we can read of a staging of data instead of a snapshot?

  Is there a way that we would not export to a data store after each step?

  is there a way in which we could define a variable that determines what process would go?

  Any thoughts would be greatly appreciated.

  Kind regards

  
  

  Hi again,

  No, I'm not an import of Excel talking at all. If indeed you are trying to import a CSV file * (which is not an Excel document), you need to configure a data store "text files-> based on the delimited text file server.

  * A CSV file is simply a text delimited file. That Excel can load and save documents in this format does not Excel documents itself.

  MS Office 2010 (I think) removed the limit of 56K lines in Excel and it went to something more close to 1 million. Incidentally, Disqualification 9.0.7 has presented a new Excel driver 'streaming' that corrects a problem with the memory usage very high when reading from or writing to very large Excel (xlsx) format native files so probably worth of upgrade 9.0.5 just for that.

  Kind regards

  Dean Murphy

  [email protected]

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• How to configure the engine JMX parameter in the administrative process?

  Hi all
  
  I installed OBPM10gR3 on the WLS 10 gR 3 clusting shell. OBPM Motors started successfully.
  
  There is an administrator of the server running on localhost: 10101, a Manager running on localhost:10103 server, another server managed running on localhost:10105.
  
  I wonder how do I set the engine JMX configuration in the Administration process. What port? 10101 or 10103,10105? How about the credentials, weblogic as the default user?
  
  I'm appreciated you can share me the configuration engine JMX in weblogic clusting administration process. Thanks in advance.
  
  Best regards
  Bill

  See below for the settings you need:

  Configuration of engine JMX management
  Host: (this must be just one of the servers in the cluster managed)
  Port: (port of the managed server you chose above)
  Main: FuegoWebLogicDeployer (create this user in weblogic first)

  Responsible for the deployment of BPM for WebLogic applications
  BPM Application deployeur URL: http://:/fuego/deploy/servlet/worker
  WebLogic Server or the Cluster name:

  Hope that helps,

  Mike

• How to export a single job Disqualification as well as the related processes and data warehouses

  Hello

  I'm new to OEDQ. May be that it is a fundamental issue. But I am not able to find any way. Help, please.

  I use OEDQ version9 and installed locally in my system. I prepared a working with a CSV file as source and used some transformations of control (data type, control the length) in my process ( I've also enabled publish it on the dash for this process option) to prepare the work.

  Then I took the export of .dxi of employment by right-clicking on the name of the job and by selecting the package.

  But when I import this package dxi to another machine is not able to find the related processes and then I am unable to run the TASK.

  Now, is it possible in OEDQ where I can take export a JOB with connections and related processes?

  Kind regards

  Samira

  It is normally easier to pack the whole project, but for any object, you can filter a project first and then package it. To do this for a job, right-click on the task and select filter of dependence - elements used by the selected item. Then package the filtered project - this upward work package manager and all other dependencies (data banks, data interfaces - you won't have to 9.0), snapshots, data staging, refer to data, process etc..) The same works for other objects and processes.

  I would note that since three version major 9.0 so you are encouraged to use a newer version if possible.

• Configure the Disqualification on Tamcat Server

  Hello

  I want to install the 11.1.1.7.4 on Solaris SPARC 11 Disqualification. I was struck at the stage where the Oracle installation guide says... "Unzip the adf-essentials.zip file delivered with the product of the Disqualification, in the lib.adf directory '

  Where can I get the ADF - essentials.zip?

  I do not see this file in the 'Oracle Enterprise Data Quality 11.1.1.7.4.zip'

  any help is appreciated... TIA

  concerning

  Javed

  I got the answer.

  Its actually generated in the EDQ_HOME folder Disqualification poles.

  Thank you

• Configuration of FlexSync for the Agile plm for process 6.1.1.1.11

  Here are the two queries that we have:

  1. create a new report on the environment:

  We followed the procedure to create a new flexsync report below:

  1. Open the configuration of FlexSync on the application server.
  2. Copy an existing out of integrated report "SingleFormulaPER".
  3. Change the new copied the report in step 2 and provided a name and traveled to the model file that had to be added.
  4. Committed change.

  To approve the changes, we observed that the database entry is made in the table FlexReportFields and FlexReports for the new report that we created.

  After doing this, we've made an entry for the plan of the site - Extensions.xml for the menu item. We are not able to see the name of the new report created in the user interface on the specification of Formulation. It says "no translation is lblbatchsheet. How to build a PKID for the entry in the CommonXLAExtensionCacheItem table and add the question of translation for this new report?

  What are the steps to follow to get this entry available for the user to be able to generate reports?

  2. adding a field to the report:

  We have modified an existing template to add a new column of the effective Date of the Summary tab. We used the name as "Summary.Effective" in the name Manager in excel for this new attribute template.

  After the update the model, we will open the FlexsyncConfig to edit the report, look for the updated model and then commit the changes.

  After that make us this change to the model, when we run the report specification formulation, we are able to see this column added to the report but the value is not getting from the report.

  We found that there is no entry in the FlexReportFields for this new attribute changes. When that we export this report to the FlexSyncConfig SQL code to run the script on database, as we are unable to find this entry in the script.

  These are the fields that must be added to the exiating report:

  Attribute	Spec	Tab	Section
  Density (2 values, 2 unit of MEASURE)	(Exit formula) material referenced	Summary

  Design features

  Starting on (date)

  Formula

  Summary

  Summary

  (Known to contain) allergens

  (Exit formula) material referenced

  Compliance

  Allergens / known to contain

  What are the steps that must be followed to modify an existing template to add/remove fields?

  Using FlexSyncConfig report, in the table fields Editor, if you the si vous la souris mouse click the column of fields on a single line.

  channels section manager updated to display the Manager string associated with this field.  You can then use the

  Manager string the drop down menu to choose what string to associate with the field.

• The Disqualification CDS error

  I installed 11.1.1.7.3 Disqualification server and configure step as mentioned in the document below

  http://docs.Oracle.com/CD/E48549_01/doc.11117/e40736/cdsis.htm#sthref1

  After the step below minus 1.5 installation procedure section.

  6. Repeat steps 4 and 5 for the disqualification - CD - 11.1.1.7.N. (.) DXI N) and the Disqualification - CD project that it contains.

  
  

  I see invalid processor name errors when importing the Disqualification - CD package. I could not attach the image in this post, because it was not allowing me

  
  

  Any help is appreciated

  
  

  Thank you
  

  There are two possible causes of this error:

  1. you don't have all the functional modules that are enabled on the server of the Disqualification. Disqualification - CDS needs all the functional packs to activate.

  2. you have not installed the processors extended requiring Disqualification - CDS. This is done by extracting the config.zip file provided on your local home Disqualification (Disqualification 11 g) or the directory config (Disqualification 8.x/9.x), which will write the appropriate localwidgets and localgadgets. This step is part of the installation process, but sometimes is not respected.

  Mike

• Connector of the Disqualification Siebel - where are the reference data?

  Hello

  I need to add a web duplicates verification service to my Disqualification - CDS project. And I would check if Disqualification fills the internal reference data table. But how can I know where is this reference data table?

  I have not configured any storage data in any far - as I've not met any stage in literature who told me to do. Not sure if it's true. S_DQ_ORG_KEY in Siebel's to fill. But is that all I need?

  I use Disqualification 11 and Siebel 8.1.1.3.

  Daniel

  The equivalent services CDS reference data ports wired for coupling reference data, but these are not used for Disqualification attached to Siebel. They are used when the pairing process is used for the enrichment of data.

  With Siebel, Disqualification * does not hold * a copy of the customer's data. Siebel returns records Disqualification, Disqualification so didn't need to access or attempt to keep a synchronized of the 50,000 records copy.

  I recommend reading the help topic Disqualification on corresponding real-time online - which can help clarify things. Also read DQ Adminstration Siebel Guide. Siebel has a DQ interface mappings defined attributes that are then mapped into the web services of the Disqualification. When activated, Disqualification is called every time a record is added or changed in Siebel to check if it is a duplicate. Driving record is passed through, as well as candidates who share a key value, in a single web service request. Disqualification then returns all the matches of Siebel. No data is stored in the Disqualification here. All this is predefined - you can change it if you must, but you don't need to create web services from scratch.

  Note that it works really well, you need Siebel 8.1.1.10 or later because this allows to use the Disqualification to generate the keys used for the selection of candidates. Otherwise, the selection of candidates will be too rudimentary to match really effective.

  Mike

• Conflict of resource with card wifi PCMCIA on the boot process

  -Did you turn off the wlan card integrated in the victory and also with the switch near the wlan on board.
  -Did you flash the latest bios version

  Seems that the problem is loading.

  Is it possible to disable the onboard in the loading process? Even though I'm sure it must be possible to have two cards installed?

  I'm really looking forward to receive assistance.

  A shame that there is no cat.

  No, as much as I know you can disable only the LAN card and not the wireless network card.
  The wireless network card may be disabled in Device Manager.

  But have you tried to change BIOS options for the PCMCIA card.
  I put t know what phone you have but the Toshiba BIOS options of configuration on the second page.
  If the configuration of the device is set on all devices, you will be able to change the PC Card controller mode to: Auto selected, compatible CCIP or CardBus/16-bit

  If he not there no improvement then I guess there is nothing to see

• Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

  Hello

  I'm having a problem with the configuration of my lenovo thinkpad T410s.

  I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

  After loading Windows 7, the windows login screen.

  In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

  Does anyone have an idea how to solve this problem?

  Thank you!

  Michael

  
  

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• Hotmail has been hacked. Tried the verification process in vain! What should I do now? I need access to this account?

  How can I get my hotmail account hacked after the failure of the audit process? I don't remember what was my secret question! I put this account many years ago! m that I need files that are there... Help?

  Maybe this can help, I have

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Windows Live, http://windowslivehelp.com/ Jack - MVP Windows Networking Forum. WWW.EZLAN.NET

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!