Configuration of the wheel of the mouse to NOT Flip 3D

Similar Questions

• "Right click on the mouse do not work"

  Mouse: OP:
  The right click on the mouse does not work. How should I do?

  Hello

  You can view the configuration in the Control Panel, mouse.

  However, if the rest of the mouse does not work, it is probably time for a new mouse. For example, right-click switch does no more work.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 8 - horizontal scroll on the mouse does not

  Hello, everyone,

  I have a system running 64-bit Windows 8. My Gigabyte M6980 mouse has a wheel tilt with a capacity to reach not only up and down but also left and right. However, the inclination of the wheel does not record in my Win8 machine.

  I plugged the mouse on a Vista laptop where initially the system has not yet recognized the mouse at all (the cursor is not mobile). After going to the Manager of devices and update the driver for the "unknown device" which was M6980, it became a "HID-compatible mouse. I could then move the cursor AND use the horizontal scrolling. On a Windows 7 computer, the mouse was recognized immediately and I could use horizontal scrolling very well.

  I tried to copy mouclass.sys of my laptop Vista and mouhid.sys to C:/Windows/System32/drivers on my machine Windows 8, but then the mouse could not be recognized at all the original files should be restored. The same thing happened when I copied the same files from a Windows 7 machine.

  Gigabyte support response is that the mouse does not officially support Windows 8 and all the features are not guaranteed. There are no drivers available for the device and the only software that comes with it is motor Ghost of Gigabyte for remapping keys. But given that horizontal scrolling works in Windows 7 without any additional software, I suspect driver Windows 8 HID is involved, although I could well be wrong. I couldn't Google solutions. Any help would be appreciated.

  See you soon,.
  Jesse

  Hi ShiuabKhan,

  Thanks for a quick reply. Windows 8 is now picking up the thin horizontal scrolling messages. I tried to randomly check the software option Gigabyte 'disable horizontal scrolling' and apply changes and then uncheck the new, and, curiously, it started working. However, I install the latest version of the software from Gigabyte (which just happened to be released February 1) in compatibility mode to be on the safe side.

  Although the system is now picking up messages from horizontal scrolling of the mouse, my Battlefield 3 game won't recognize them, but is not a Windows problem, so I'll find an answer elsewhere.

  Thank you much for the help!

  See you soon,.
  Jesse

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228

• I removed the nano-receiver to the USB port & back the mouse did not.

  I have 2.4 GHz Wireless Nano Mouse (model MP2375BLK) optics.  I removed the nano-receiver to the USB port & back the mouse did not.  Batteries are fine, if I remove the battery and put it back in the red light flashes once, but the mouse will not turn on.  I checked the State of the mouse in Control Panel control (devices & printers) and it indicates that the device is functioning!

  I thank God for warranties.  Just bought itOn June 3.  Summer works fine until I removed the nano-receiver of the laptop, did not work again!  Let's get back to the store.

• Windows vista hangs at login screen, not responding not the mouse, keyboard not to react.

  My father called me and is a problem with his laptop.  It is running Vista Edition family Basic.  It starts and gets to the screen where you type your password, but freezes it.  The mouse is not active, and it can not type his password.  When you try to start in safe mode, it does the same thing.  Someone had problems with this before?

  Hello

  Will there be any changes made to your computer before this problem?

  After starting the computer, leave the computer idle for awhile and check what is happening.  Check if you receive error messages.

  This problem may occur in many scenarios. These scenarios are:

  one.	The registry is corrupted.
  b.	A system file is missing or damaged.
  c.	A device driver file is missing or damaged.

  You need to do a Startup Repair or System Restore DVD to fix this

  Startup Repair: You can run the Startup repair tool by using the Windows Vista installation disc or by using the preinstalled computer recovery options.

   

  Please refer to this article to perform a Startup Repair

  http://support.Microsoft.com/kb/925810

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  System Restore: Follow the article below to perform a system restore.

  http://support.Microsoft.com/kb/940765

  Reference: How to solve problems of performance during startup in Windows Vista
  http://support.Microsoft.com/kb/950684

  Thank you

• The mouse does not work when coming out of sleep mode

  I move the mouse to the computer of the mode "Eve".  Our journal 3 on tiles appear.  My husband,. admin Acct and finally my user account.  Admin account and my acct have the same privileges.  In any case... The mouse will not move the cursor at all once the computer wakes up from sleep mode.  My husband tile is highlighted and so I either hit tab again so he can highlight other options that I can hit enter too and I hope that the mouse starts to move the cursor.  It won't let me spend the good user.  If I type his password on his account, sometimes it works and other times it won't.  So I tabulate between change username and password reset and cancel until he started working.  Very frustrating!  I changed the batteries in the wireless mouse and it would work for a day or two and then same problem.  I also tried to return to an earlier point when the computer worked as it should.  Again... problem would return.  I have tried installing and re - install the intermittent operation of device (mouse) and then the next day would not.  Finally uninstalled this mouse and bought a new Logitech wireless mouse.  He began to do the same.  Help, please!

  Hello

  (1) work well before?

  (2) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Make sure to enable the option to allow this device to wake the computer for the mouse and keyboard and check if this can help, follow the steps provided below.

  1. click on Start.

  2. now type devmgmt.msc in the search for files and programs.

  3. on the screen of the Device Manager, right click on the mouse and other pointing devices.

  4. Select Properties.

  5. now you must click on the power management tab.

  6. now check box allow this device to wake the computer.

  Method 2 : You can also try to create a new power plan and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

• Roller Coaster Tycoon 3 Platinum! -The mouse does not appear

  Hello, I just bought RCT3P, and it works. However, the mouse does not appear in the game, the mouse works but I can't see where I'm on the screen. I tried a lot of different things, but none of them work. I have a HP laptop and it works in Windows 7. Please help because I'm not tech saavy

  Hello

  1. what troubleshooting measures have tried to solve the problem?

  2 - is the problem only occurs when the game? (Please specify the name of the game)

  You can try the steps it might help you to solve the problem.

  Turn off the mouse pointer trails and check if you are able to access the mouse pointer in the game.

  (a) click on the 'Start' button, click on ' Control Panel ', click on 'Mouse'

  "(b) subjectthe pointer Options tab, uncheck the box"Display pointer trails"

  (c) click on "OK' to save the settings."

  I hope this helps.

• Left click of the mouse does not respond in the office and I could see 2 together (Picture) Office

  Everything works well today that the left click of the mouse is not responding on the desktop (icons does not meet the double click). Right click works ok, and left click works well on programs and in the taskbar.

  Weird things here, it's that I can see two desktop at the same time.

  I have attached a picture.

  Can someone help me?

  Thanks in advance.

  

  I got disabling the system restore, so I can't go back to a good version.

  Turn off the system restore makes things much more difficult. Your problem is probably due to an inappropriate registry setting. You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.

  Check the date of the file C:\Windows\System32\config\regback\System. It precedes the date when you became aware of your problem? If so, follow these steps:

  1. keep tapping F8 during the first phase of startup.

  2. Select repair in the menu that looks like this.

  3 log in as administrator if you are prompted.

  4. Select repair when prompted.

  5. Select the command line in the menu that looks like this.

  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands exactly:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  8 type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• The mouse does not work on a few screens in windows 7

  Hello team
  I'm using a windows 7 64 Bit OS. My mouse has stopped working on a few pop - up screens.

  Steps to reproduce:
  Start > Control Panel > program > Java > a pop up appears and my mouse does not work on it.

  This is just one example.

  The same happens when I use Oracle EBS. The mouse does not work on the pop-up forms of oracle.

  Can anyone help.

  Thank you
  -

  Hi NagaKotagiri,

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the computer and the mouse?

  This problem can occur because drivers damaged or incompatible, lack of updates, the incorrect device settings or hardware problems.

  I suggest you try the procedure described in the article and see if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Check out the link for more information.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Clicks of the mouse do not work in IE9, Excel, iTunes and other programs.

  Clicks of the mouse are not working.  IE9, Excel, I-tunes and a few other programs.  It sometimes takes several mouse clicks, or in the case of IE9 when you activate the address bar or Favorites or even try to select a checkbox it seems that you must hold the button of the mouse down and after a few seconds, it will recognize the command.  With favorite IE9 you must hold down the mouse button and drag down to the place wherever you need to be communicated, then click on?  In Exel, the mouse cannot select multiple cells, in other programs her taking mulitple mouse clicks to highlight & copy text in the text example I've copied below from Microsoft answer Forum - I followed the instructions below and it did find and fix some problems, but there were others, he could not correct?  They were listed in another file, but I don't remember the name of the file, or how to access it?  I have run Norton 360 on my system and a complete analysis will detect all viruses?  Please advise?

  Thank you for using the Microsoft Answers forums. I suggest that you run the System File Checker. To use the tool (SFC.exe) System File Checker. To do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Thank you

  Andrew Pugh

  Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.