Configuration profiles

Similar Questions

• Configuration profile options

  Hello
  
  in 11.5.10
  How to:
  Configuration profile options
  3 new system level profile in the section of iProcurement configuration values:
  n POR: name of the proxy - name of the Proxy Server if the client has a proxy configuration
  n POR: Port of the proxy - port of the Proxy Server if the client has a proxy configuration
  n POR: file name of certificate CA - absolute path to ca - bundle.crt where all the
  the names of certificates are stored
  
  
  Thank you.

  Hello

  Go to--> profile--> system system administrator

  Enter the name of the profile to what to look for and set the appropriate value at the Site or Application Level or level of responsibility or user level

  HTH
  Kind regards..

• Host application unwanted configuration profiles

  Hello

  I'm currently testing using profiles of host to apply some settings specific to my guests. I start simple - everything what I want the first attempt is to apply the settings of Core Dump.

  I have:

  • configured my host of reference with core dump settings
  • the creation of the host of my reference host profile
  • The option toggle the profile Configuration of 'Coredump in the network settings' are valid
  • Attached to my target host and checked for compliance - this allowed to identify the CoreDump parameters as the failure of the observation only.

  I apply the profile of host to my target host, MISTLETOE advised thus apply the CoreDump settings it will remove the configuration of the entire network of the host target (all vSwitches and port groups).

  So - where I'm going wrong? I understand that the profile should apply CoreDump settings. I don't understand why he removes all network configurations too.

  I would be grateful for the pointers that anyone can offer...

  Hello

  Please go through the link... Might give you the idea on the issue, that you face.

  VMware KB: Coredump in profile host network breaks network configuration

• Configuration profile to apply a blade to other blades

  Hello

  Can someone tell me pls to a how-to on a blade Configuration capture profile and apply that to the other blades in a m1000e chassis?

  Is the material must be exactly the same (the same model and size of hard drives, as SSD vs non - ssd? What happens if the disks are different)?

  Also, applying a profile will inform as this automatically causes a reboot?

  THX,

  John Bradshaw

  Bradje1,

  If you follow this link, it will guide you through to replicate the configuration between the blades. Which, when applied, causes a reboot. The blades will also have to match the level you are replicating, for stability I also recommends that the revisions to the BIOS, controller of life cycle, as well as the iDrac are updated and current as well.

  I do not think that the readers and table will be a problem

• Copy configuration profile

  I would like to transfer the settings in the profile of one group to another Manager and make changes accordingly to the new group.

  In the application server group templates do not include the settings from the Profile Manager... Weird?

  Anyone know how to copy the settings?

  I'm not aware of a way to do it, but looked in the past for a solution. The attached link talks about setting up a base of reference and then finely adapted to the settings for the new groups that are subsets of the broader what is decided what I try to do.

  But it would still be nice to have a copy command.

  Is it possible to duplicate a profile in the Profile Manager

• HP Laserjet M276NW: Outgoing e-mail Configuration profile

  Get the message-Smpt Server uses an authentication method that is not supported.try another server. I Gmail.Not sure what to take.

  Hello

  Gmail change recently several security options that can block the printer to connect to their servers.

  Open the following link and check the following settings:

  https://myaccount.Google.com/

  First make sure you are signed in with the same account that you define for the printer. change the account of user if needed.

  Within the signature in section ensures that 2-step audit is defined as Off, so access to less secure applications is allowed, otherwise, the check fails.

  In the recent article of activity click devices, if you see a blocked the connection attempt (it will be marked up in red) click Yes, and then follow the steps in allowing access for insecure applications...

  Once you're done open your homepage to the printer and enter the outgoing e-mail profile settings and rerun a test.

  Hope that helps,

  Shlomi

• Adding a custom under the test Configuration profile

  In older versions of PS, if I added a custom format to test profile, it should be pinned to the Format menu to test (and the default profile).  That does not happen in PS CS6.

  Is there a specific place, I need to save profiles customized evidence so that they appear in the menu?

  I had no problem with it and is for me

  ~/Library/application support/Adobe / / color proofing.

  Where exactly have you saved the file?

  Could you provide a screenshot?

• Apple Configurator - ios 10 - applications are allowed with a composition problem

  Hello

  We use apple configurator to generate configuration profiles imported into MDM and install remotely to iphones.

  Suddenly, we have a strange problem with configuration and 10 of IOS. In the configuration, we use "Allow only certain applications" and with this settings, we cannot make outgoing call. Nothing happens... (nothing is happen hit the button risk, nothing will happen if select contact and select the phone number and click the call button). Receive works fine... If the configuration profile published and enable the allow all apps restriction, the call works again...

  No idea what has happened in the new IOS? There is a new application of system that we should include in the list of allowed applications?

  Concerning

  Hello

  We have exactly the same problem. We use Apple configurator to generate profiles and import to MDM.

  Suddenly once updated to iOS 10 and assistance to only allow applications in the section - whitelistedAppBundleIDs - we cannot make outgoing calls. Tapping the green button does not work.

  Any ideas what happened after updating to iOS 10?

  Same behavior with iOS 10.0.2 and in the whitelist BundleID com.apple.mobilephone

• Does not include the webclips in a profile on a shared iPad

  In our shared environment of iPad, I am not able to include the webclips to configuration profiles. If I understand those, the configuration profile will always fail to install. In the past, we have had no problem doing this, this problem came only since we recorded our iPads as 'shared '.

  I am including the webclips in standard settings per device group.

  I monitor something?

  Hey, I have this problem also.  I have a profile with just a webclip and it fails with the error code 4001 MCInstallationErrorDomain.  My supplier MDM said that the profile must be a limited user profile, but there is no option of payload web clip when I try to set up a limited user profile.  So far, my MDM said it could be a UI thing and it is available and just do not show on the page, or they just have not written the code yet.  Anyway, I couldn't make it work again.

  I'm just wondering if you found a solution yet.

• Manager profile: some applications push successfully each time, others never push successfully

  I have a cool (from about 3 weeks) version of 10.11.1 the install app server with the configured profile manager and was previously fully functional.  This morning I went in VPP and 'bought' 8 new free applications that appeared in my list of application profiles manager soon after.

  Now, I have 6 apps that will grow to 100% of the time without error of iPads.  One is a company of ipa, is a managed distribution VPP (notability) app, the other four are free apps 'purchased' via VPP this morning (OneDrive, Quizlet, iBooks, K3000 Firefly).  These push and re-grow my devices to test without problem each time.

  However, I then an another five apps that fail every time during the initial registration of a wiping device and subsequent attempts manually, select them and push them into the Profile Manager.  These 5 are another successful distribution VPP app (AudioNote, who was working when pushed since last week), the other four are free apps "bought" the VPP store this morning (MS Word, MS Excel, MS PowerPoint, and Flashcards *).  These failures are recorded in the "completed tasks" without any details on why he didn't actually and do not appear on devices.

  Until this morning I had only been pushing two distribution managed VPP apps and both worked very well.  This behavior has persisted after a few reboots the server MP, turning off the firewall, etc.

  I turned on logging APNS but do not see anything clearly wrong being connected here in these applications fail.  I don't see anything that seems to be of importance in the /Library/Logs/apsd.log well.

  It would be more logical if only a guy worked / didn't work (i.e. just the apps Distribution managed to VPP, or just the IPAs or just free apps).  It is not even related to the order that they were added to the Profile Manager.  What could cause some apps to fail and others to work?  What is the next step in troubleshooting?

  This has been/is somehow iOS 8.3 related well that I was not really able to determine exactly what is happening.  My test devices were fresh, out of the box with iOS 8.3.  I could go in the app store and download applications that have failed without problem even if so it wasn't simply a 8.3 problem of incompatibility app for these particular applications.  After their passage to 9.1 applications grow now as expected.  I have no explanation for why AudioNote would drive forward to the devices iOS 8.3 without problem but then decided to stop pushing until they had 9.1.  The behaviour persisted many wipes, reboots, and registration so it wasn't just reset that occurred within the framework of the iOS update.

• System of iDRAC settings profile attribute - thermal

  I'm working on automating our deployment standards. I use the profile xml import system do not do this with good results.

  A remarkable article, I was not able to manage a xml import is a setting found when booting to lifecycle controller > system settings > iDRAC settings > thermal in the user Options area.

  The cooling options are by default as the value auto and I need to change that to offset fan speed and set the offset to Offset low.

  I am unable to find an attribute for these settings on an export of complete system on a r.620 profile.

  It is a parameter that has no attribute and cannot be managed through Automation?

  Hello

  I don't see an attribute for it in any of the documents

  http://en.community.Dell.com/CFS-file/__key/Telligent-evolution-components-attachments/13-4491-00-00-20-43-93-35/Server-cloning-with-server-configuration-profiles-June2014.PDF?ForceDownload=true

  the XML file structure

  You should be able to set the attribute with racadm Page 263

• Profile of Alienware Area - 51 ALX Intel XMP A10 does not work with DDR3 1600 MHz

  I bought three Kingston 8 GB RAM DDR3 1600 MHz 240 pin DIMM that totals up to 24 GB of RAM and install in my desktop computer. When I turned on and the message appeared saying:

  Maternal health and infant is running with DDR3 - 1333 MHz

  WARNING! Previous overclocking failed, and system restore its default value. Press F1 to continue, F2 to enter Setup Menu

  When I access the BIOS setting (version A10), I disabled XMP and then it went through fine after the reboot. However, I have to have XMP allow at any time? How can configure profile 1333 MHz to 1600 MHz XMP?

  What bothers me is that I had three former PIN of Kingston 4 GB RAM DDR3 1600 MHz 240 DIMM which total up to 12 GB of RAM and the XMP worked very well with them before they were 1600 MHz.

  The type of computer I have is:

  Alienware Area-51 ALX

  Intel Core i7 980 Extreme 6 c with 12 MB of Cache

  Windows 7 Ultimate

  Please, help me to solve this problem. Thank you.

  See this:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19471694/20209913.aspx#20209913

  And I certainly don't have the answer, but I'll remember these points:

  1. I think that you can set manually nothing XMP adjustable (but with more control).

  2 machines often memory need to be slowed down when you are near maximum capacity look maintenance manuals.

  3 area-51 has never been tested or even allow the 8 GB DIMMs. You are in the new territories.

  4. If you really need 24 GB (and it works at 1333) then the 267 speed drop is insignificant.

• How to manage the area without their password user profile

  Our company has recently adopted a password policy that requires some basic change to the it Department do not ask for passwords and passwords each time (n).

  I know... I know... it was a bad policy but we had lived with for a long, long time.

  So now my question is this.

  In the past as a COMPUTER technician, when I would change the settings of a user on their profile or when I would need to set up a new computer for them I would always get the password to users on their part.

  Now, I have a situation where I gave a new user, a loan, they have changed their password and I build their permanent pc. Well well all the way up to what user configuration profile sort...

  What is the best way to change the profile of users... such as printers, shortcuts, email add-ins without resetting their password and giving them a new, then have them reset after giving them the new PC?

  Thank you

  James

  What is the best way to change the profile of users... such as printers, shortcuts, email add-ins without resetting their password and giving them a new, then have them reset after giving them the new PC?

  To configure the user profile you must either ask him his current password or reset his or her password. You cannot change its profile without logging into his account. Unless, of course, you spend a lot of time to analyze exactly where its countless parameters are stored in the registry, and then duplicate those settings manually in the news of the the user ntuser.datregistry hive.

• Error - certificate does not match the profile: the default keychain is not a corresponding identity

  Hello

  Building our iOS app, but make that mistake every time.

  I have regenerated all the CERT signing request, all the way to the p12 file, but still get the same error.

  The "You can fix this link here" goes to https://docs.build.phonegap.com/en_US/support_failed-builds.md.html#cert_profile_mismatch , which never loads.

  I really need to get this built, so would appreciate any help available.

  Thank you.

  -Evan

  You also regenerate your provisioning profile? This sounds like the configuration profile does not contain the certificate that you downloaded.

• How to Auto poplulated fields of index for scanning profiles

  
  Hello

  I worked on Webcenter Capture 11.1.1.8.0, we have recently configured profiles customer capture and we have also set up Email profiles and analyze the profile.

  My concerns here, how to index get fields automatically filled for individual profiles of customers during the analysis of the images of the invoice.

  currently I feed the index on manual work fields. We want to avoid the manual work and it must be filled by full Auto the index fields in the analysis of the invoice for each individual customer profiles. Different index values should appearance for differnent customer profiles.

  the above requirement, is there configure everything can be done in Capture console. We must make this resolution with Console to capture only not to provide all the scripts. We do not want to use Scripts for this requirement.

  Please help me. This something urgent for the business scenario.

  If your question is: "How can I apply different default values of metadata based on the customer profile?" then I think that you will have to do so via the import processor (if you use is not a scanner), recognition or scripts custom.

  You can set up a default for each metadata field, but this won't cut it for you.

  You can probably do this through recognition jobs processor by creating a different one for each customer profile and defining your customer post-processor on his work of processor rcgn correspondent.

  Hope this helps,

  -ryan

  Sound clips SENA