configuration system-2147220614 error

Similar Questions

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• LV RT - system configuration: Find_Systems.vi - error "-2147220620."

  Hello

  I have problems with my code running on my cRIO in run as startup mode, but not in development mode. See extracts attached code. Copy the following code does throw some error when I run my development system, but when I deploy on the cRIO, my log file shows an error:

  -2147220620, source: nisyscfg.lvlib:Find Systems.vi:1750001
  «"" "String of full appeal:»»"»
  nisyscfg.lvlib:find Systems.vi:1750001

  I looked at the error and it corresponds to "a specified expert is not installed."

  I made sure the cRIO has every possible thing installed and up to date, if this isn't the problem. I also forced the nisyscfg.dll to be included in the support directory and the error persists.

  I ran the VI of Experts get so to get these:

  mcSysApi Motion system API Expert 14.0.0

  nor-1588 OR-1588 2008 1.0.3

  NEITHER nor-rio-RIO 14.0.1

  Neither visa NOR - VISA 14.0

  niimaqdx NI IMAQdx Sysapi Expert 1.0

  nisyscfg Configuration system OR 14.0.1

  nitsf NO time Sync Framework 14.0

  series NI - Serial 14.0

  XNET NOR-XNET 14.0

  It's the second time, I ran problems where there is a discontinuity between my code running on the cRIO only and it works in development mode.

  Does anyone have suggestions for this problem?

  Thank you

  I may be something, but I do not have 100% tested solution yet. If I run the VI once RT has had time to sit for a bit, it doesn't throw the error. This leads me to believe, the cRIO had not fully initialized at the time I called the VI. I think it is a bug on a part of NOR, because all the libraries, etc., must be charged at the time that runs the code in real-time...

  in any case, I made a loop trying over and over again (max 60 seconds) until no errors are oputput and it seems to work. It takes about 30 seconds (from cRIO startup) to error out not well.

  I have tested in my complete application now and will report back if all goes well.

  EDIT (follow-up): it worked! I guess that there is not much of a fix, but more than a workaround. It takes almost exactly 30000ms each time for no error.

  Best,

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Error reading data Configuration system after a keyboard spill

  Hi, I have a huge problem.

  First of all, I am dual-booting Windows Vista Home Premium SP2 and Ubuntu 9.10. That is how I am able to post here, because Windows will not work. I have a laptop Gateway which is about a year and a half now, and I need it for school work. Today while I was working, I just turned around and knocked over a bottle of water, which some of its content seeps to the computer keyboard. I have dried up as much excess mess I could and turned off the computer to let it dry. Back to put on gave me an error. The gateway logo came on the screen, as it was loading up, and it got to the point just before it reaches the bootloader and made up a list of Windows process is apparently at the start of the computer each time that. Well under something in the sense of "Mouse initialized" there is an error that says: "System configuration data read error - press F1 to continue, press F2 to Setup."

  The first time, the F1 and F2 keys button would not respond. I assumed it was because of the water, and tried again later. I tried to continue, and the computer has the bootloader without any problem. I'm on Linux to see if it works properly, and he did. I went to mount the C:\ drive and check all of the corrupted files and from the looks of it, there are not. So I restarted the computer, pressing F1 on the error screen again and tried to load Windows. Windows does not start, and I got a message that says essentially that some files has been prevents me to start Windows, and that a Vista disc to the same version I have on my computer allow me to repair the damaged file. I do not have a disk.

  I need to go down any important Windows data and I can do it through Linux, but it is more convenient to do it in Windows. How can I fix this problem without a Windows Vista Home Premium Service Pack 2 disk? A FSC would help? If so, how can I get a? Would let the computer dry a little more help?

  Thanks in advance!

  Give him more time to dry.
  
  If problem persisits, you may need to contact Gateway re replace the laptop keyboard, material etc:

  http://support.gateway.com/support/default.aspx

  And if you need a start-up repair disc in the future:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon. Mick Murphy - Microsoft partner

• Ink system failure error 0xc18a0201

  After installing new ink cartridges provided with HP C7280 all in one ink system failure error 0xc18a0201 occurred.  Cannot find reference to this anywhere error code.  What is this and how can I fix it?

  I found this solution for... C5180 ink system failure, and assumed/hoped the firmware was the same... it worked!

  ***********************************************

  Press and hold the "left arrow" key

  Press the "Setup" key and release both keys.

  Display should say "enter special key Combo".

  Press and release the OK"" button.

  1. press and release the right arrow button until the display shows "Menu of theSystem Configuration'.

  2. press and release the OK"" button.

  3. the display should say "hardware failure status". If it isn't there already, arrow above for "Hardware failure status"

  4. press and release the OK"" button.

  5. display should say "hardware failure status: clear." Press OK to Erase".»

  6. press and release the OK"" button. Message becomes " failure State material (breakdowns) resolved." Press Cancel to continue.

  7. press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the " failureof the System ink " appears. DON'T TRY TO PRINT AT THIS STAGE.

  8. using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  9. wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  10. turn on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  11. If the printer has already initialized, then go to the next step. If this is not the case, the printer will start the "ONE TIME INK PROCESS of INITIALIZATION". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  12. to verify printer functionality print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use.

  NOTE: If the error is still there, or reoccurs replace the unit.

• dll from System 32 error code (0 x 300000030)

  dll from System 32 error code (0 x 300000030)

  First of all, if you have gone through your windows folder, you might be familiar with the name of the system32 folder. This is a very important issue and part of your operating system without which your system may not work at all. Some consider it as the brains of the operation because it contains many dll files in what is active and runing in every process of your system. As it is an important part of your operation, I want to tell you to keep away from this folder and never delete or change anything. It's all about your system 32 folder located in your windows folder. This has nothing to do with system32.dll.

  System32.dll is a Trojan called harnig. Harnig Trojan isn't part of your operating system and is a very harmful infected file that will give all your information navigation to advertisers and sponsors. It can also result in loss of data and information from your system. The developer of this Trojan must were smart by naming "system32" to confuse people because the experts always fear users to stay away from the system32 folder.

  Now that you know the difference, you do not necessarily have to deal with these problems by yourself. But if you have a missing dll file or a file that is corrupted in your system 32 folder, you can try some easy stuff for yourself. First of all, you can try the system restore to an earlier date which is a good way to fix many problems by taking your computer to the date of the last when your operating system have saved all of your settings. You can easily do this by restarting your computer. Once the computer stops and tries to start again you must press f8 until you see the black screen with options and then select 'safe mode' and choose the option to start windows system restore. If this does not work, you can try another way by the same procedure that is, restart your computer and press F8, but instead select "safe mode", select "Start using last good known Configuration".

  Now, all these things might or might not help you fix or replace your system32.dll files. But how can you be sure that there is a corrupt or a dll file missing in your system 32 folder? Because their could be a virus in your system 32 folder that is if other dll files. It could be something similar to the system32.dll file. You can easily solve the problem of virus system32.dll and another problem of dll with the help of a good registry cleaner that got all of the definitions and the dll files library.

• The Instance of product registration error message: "system failure: Error retrieving database xml file.

  Hi intend installation gurus,
  
  do you have hopefully solve this problem and I am also facing the same problem "Error creating instance" during the installation of Planning 9.3.1. I tried the reconfiguration of 30 to 50 times each time problem...
  
  
  OS: Vista Premium
  SQL Server 2005
  Essbase:9.3.1
  
  
  Error message: "system failure: Error retrieving database xml file.
  
  
  Details of error:
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  
  
  Please give Solution

  Hello

  I don't understand why this is the case, it may be up to Vista, the details in the file properties appear to be correct
  except the encrypted password too short
  SYSTEM_DB_PASSWORD = GGAKFJ
  have you changed it before posting?

  Also you can try to change
  SYSTEM_DB_URL = jdbc:hyperion:sqlserver://neeraj-PC:1433
  to use your ip address just to test, if you change it after you have saved you will need to make sure that you have closed the configuration utility and then restarted, it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

  Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

  Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

  You're welcome Sue

  See post below on Bob soak the printhead...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

• Portege 660CDT "non system disk error"!

  I just bought a used 660CDT and placed a new hard drive in it. Now, I can't load an OS due to this "Invalid System Disk" error. I tried to Boot on my XP Cd, but all the same. I tried to boot from a Disk Norton and nothing more... I have no idea what is wrong...
  I made sure the Bios is set to start first with the drive and not the HARD drive.
  I would use this system someday, but right now I don't see what is happening.
  If anyone can help I would like to thank very you much.

  Thank you
  Robert
  Houston, Texas

  Hi Robert

  AFAIK This oldie can treat only 1.3 GB HARD drive. How much capacity has a new HARD drive?
  Unfortunately, it is not easy to say what is the problem, because who knows what you do exactly and what operating system you want to use. Just for info. This old Portege comes with Windows 95 and you should try to use the same operating system.

  "Invalid system disk error means that Windows Setup could not copy the system files on the hard drive.

  Also, check the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU and under archive, you will find some useful stuff for this old book.

  Good luck!

• I have a password check has no fatal error... System. Error CNU9293HWR on hp mini 1151nr

  I have a password check has no fatal error... System. Error CNU9293HWR on hp mini 1151nr can someone help me please

  Hello

  Please be aware that this is not supported by HP and try your hand at your own risk.

  Try to enter: e9lo7ofzdb (to be noted that the 3rd character is a lowercase L)

  Kind regards

  DP - K

• HP mini 110 computer: System fatal error of Hp mini 110 CNU94145DN interrupted please help. Electric lock

  My HP Mini has stopped system fatal error code and I do not know the password please help

  Hello

  Please try the code below.

  e9lov3vqt9

• HP pavilion dv2000: System disable error 03122

  System Setup error disable 03122

  Hello

  Try:

  rngcz

  DPK

• System fatal error for Hp mini 110

  I get system fatal error code 2mc937djmh

  Try this (be sure correct letter/number type) > 74eofxtw4z

• Copy of the CD XL 'file system 16389 error' drive?

  Hello

  Copy of the XL to the CD player message reads ' file system ' 16389 error?

  You can watch the thread below with a similar problem. Since we don't know your operating system, I'll assume Windows XP. If you have another operating system, please let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/XP-file-system-error-16389/cfa203be-8abe-4DDD-A438-826917558464

  You can also look at the article following that may help.

  Article number: 279157 - Description of CD - R and CD - RW recording in Windows XP
  http://support.Microsoft.com/kb/279157
   
  Let us know if that helps.

  Marilyn