Control number of the indicator light flashes

Similar Questions

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• Intermittent operation (especially just a power indicator light flashes) on WRT-150N

  Anyone know if these symptoms mean that my router is dead all just please? It runs for about a week or two and then the power light flashes quickly. It is then assigns IPs constantly, whenever I have try refreshing the DNCP on my Mac (or Linux).

  I can get it to keep the constant power indicator by pressing reset while you insert the power supply plug, but then it sets itself simply IPs again.

  It broadcasts its radio very well at all times.

  Connect to it with a Mac just translates what OSX calls a 'time of connection' which seems to be MacSpeak for ' we tried connecting but your router is assigning its IP address, so we used to bother Cuatros "cos you will not be able to use this connection"

  If I leave it off for a few weeks, I can connect again, and sometimes it works fine but only for a week or two. Then the power light flashes and it will not assign an IP address most.

  It doesn't have the latest firmware, but it SEEMS a little more like a hardware problem than a firmware the firmware seems to be working fine when I connect it on the occasions where it runs correctly.

  It would seem that the problem is indeed with the router. Try to perform a 30-30-30 reset and then check if the router will have now a stable performance. In case the router still does not work, then you can either: contact technical support for assistance or to replace the router with a new one.

• Indicator light flashes yellow.

  The light - usually green and steady - hand flashes yellow. A Wi - fi connection is always connected.

  The yellow light flashes when the airport router has a message for you.

  Find out why the yellow light flashes when opening the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the AirPort Extreme

  You see a button update?  If so, click on it

  

  Otherwise, find the status setting and click on the little orange dot it for more information

• My airport express base station works but the yellow light flashes constantly how can I get the green light?

  Yellow light blinking on my airport express and I can not get the green light flashes. Internet still works well.

  When the amber light is flashing, open AirPort Utility

  • Click on the AirPort router
  • Look for the Status parameter in the small window that appears
  • Click on the little orange dot here and another window will open to explain what might be the 'question '.

• KDL-46XBR9 shuts off and the power light flashes red

  KDL-46XBR9 shuts off and the power light flashes red

  It flashes ten times, then rehearsals.

• Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

  My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

  * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

  Hello

  If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

  If it is under warranty, contact a local reputable computer repair workshop

• indicator light flashes, but there's no docs in the queue; Cannot print

  I have a Color LaserJet CP1025nw printer.  The 'ready' light has been constantly flashes throughout the day.  I can't print anything of any program.  It seems that when I try to print, everything goes smoothly, the doc still appears in the queue of print with the status "printing" but nothing no is displayed. So I canceled all documents pending, so that there is nothing in the queue, but always flashes. Flashing must indicate that the printer is receiving or processing data, but there is no docs in the queue.

  I tried to turn off the printer, wait 10 minutes and turn it back on again; also tried to restart the printer and the computer. also made sure all the cables were connected the printer to the computer; also tried opening and closing the upper part and he had to scroll through all the lights; also crossed the convenience store help and tried to print at a command prompt... nothing has worked so far.

  Help!

  SOLVED!

  Thanks to an old post here, I learned that I could try to do a hard reset.  SO I did a hard reset and the printer works now! Perhaps there was a doc stuck in the memory of the printer and it could not go beyond it?...

  For the hard reset, while the printer is turned on, unplug the power cord and cable, wait at least 30 seconds, and then plug them back in and turn on the printer.

• The battery light flashes slowly when computer is off (G6 computer 2011sa) portable

  HP Pavilion 2011sa G6

  Windows 7 64 bit

  The laptop is brand new, I got it for a week.

  This seems to happen when the battery is low, but not to the level of criticism. Initially, I notice the battery light is white for about 30 seconds and then off for 30 seconds and repeat - what happens when the computer is turned off. I turn on the computer and the battery meter shows 29% and a ridiculous time, 43hrs 29minutes. Previously, he said 127hrs. But it seems to be frozen at this value. The battery light is now flashing white and turn off more quickly. Finally the computer just turns off without warning. After recharging the battery meter displays a time in more realistic and there seems to be no problem.

  Go to Device Manager. Expand the device Batteries and right-click on the "'ACPI control method-Microsoft compatible battery ' and select uninstall." Now, do a right-click any device and select ""find the hardware changes " option." Your operating system must be reinstalled a clean copy of the ACPI Microsoft-compatible remote control battery method while parsing. Now, restart your laptop.

  Please post here your positives or negatives in your thread, while others may have of your experience with this method.

  You have installed the operating system - improvements and fixes from the web to your mobile support portal?

• The amber light flashes on my Satellite L755

  Hello Mr President

  I have the Toshiba Satellite laptop L755 came from Finland in 2011. I use last 4 years now and it worked fine, but since there is a few months on and the charging light started to blink a few times it s late start or sometimes sound immediately.

  Yesterday I changed the battery and the AC adapter / CC, but the problem persists. I reset the phone by removing the battery and the AC adapter / CC, hold the power for butt 30 sec button, nothing happened.

  Hello

  On this virtual path, it is not easy to say what the problem is here. If you are not able to boot up your laptop and everything that happens is a light flashing, I fear that there is a problem of electronic power supply.

  A flashing sends a code. This code can be read by technicians and by using this code, they can find what is the problem. If there is a serious problem with electronic board I assume service say that the motherboard must be replaced and it is quite expensive.

• Why is the yellow light flashing on my HP Deskjet 5550 printer?

  Green indicator light remains lit, but the yellow light keeps blinking.

  Take a look at Page 6 by your printer manual:

  http://h10032.www1.hp.com/ctg/Manual/bpd09384.pdf .

• The yellow light flashes on the printer.

  Original title: Printer problems

  My printer print 1 page very well then the printer sounded like he wanted to do more printing, even though I only asked for 1. Now, the lite flashes yellow. I checked this: no paper jam. I cancelled all print jobs, just in case, although none showed. I disabled all the equipment, restarted and yellow button continues to Flash. The ink cartridge is new. I asked Windows Help for printer problems, none is shown. I asked Microsoft to help you, no answer. Any help is greatly appreciated. Just know that I'm not a cranky then please use the current language if you answer. Thank you. Jean

  Hi John,.

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Let us work as a team and try to solve this problem.

  If I understand correctly, you have problems with the printer.

  Please answer these questions to better understand the issue:

  1. What is the brand and model of the printer?

  2 have you referred to the manual that came with the printer?

  3. have you tried to contact the manufacturer of the printer?

  If the printer has an orange light flashing, this may mean that the printer has an internal condition 'fault' which is found only in the printer itself.

  I suggest you contact the manufacturer of the printer for more help.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Reference DELL INPIRON - sense of the power light flashes (4times orange short, 1 long white period)

  My Dell Inspiron 1545 started blinking the power light in the following model:

  4 times orange (fast)

  1 white (slow)

  I installed the software 'My Dell' and a health check. Nothing wrong was found.

  What does flashing power light mean?

  Thank you

  Leo.

  Your battery is endangered.

• How can I fix my CD player that does not start spinning, however the green light flashes twice and the door opens fine.

  I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.

  Sounds as if the reader does not, replace it and see what happens.

  "evil heart," wrote in the new message: * e-mail address is removed from the privacy... *

  I recently got a desktop computer. It's an hp with Microsoft Windows XP. I don't understand not brand-new, but it worked when I got it. My children decided to "help" with a cd of one day and he has not worked since. It is not simply turn and nothing shows up on the screen as if I never put anything in the drive. I tried to open a file manually, but he just told me to insert a disk in drive D. When I close the door, it flashes twice, then nothing happens and it is completely silent. I'd appreciate any help.

• Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

  Hi all

  Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

  Thank you

  Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

  I hope that you have a previous backup, you won't be able to recover your data