Configuration system for BB10 signature error

Similar Questions

• Cannot install the debugging for bb10 token: error in tag hr

  After having successfully generated a debugging token, jcdebug.bar, I tried to install it using blackberry - deploy and got a fatal system error.  My entry of order/.output line is below.  What am I doing wrong now?

  Token of debugging C:\Users\Jacquelyn\Documents\Jacquie\Blackberry\bb10 > "C:\Program Fil".

  are (x 86) \Research in Motion\BlackBerry 10 SDK WebWorks 1.0.4.7\dependencies\tool

  s\bin\blackberry - deploy"installDebugToken - jcdebug.bar - 192.168.1.10/24 device

  -password mypassword

  [Fatal error]: 5:3: the element type "hr" must end with the corresponding end

  -tag «»

  Error: Authentication failed due to system error

  DOH!  I forgot to put my (dev alpha B) device in development mode.  Also used the IP address specified for the development.

  Fixed a problem.

  Now we'll see if I can put the debug token...

• error while configuring nfs for unix or openfiler

  Hello

  I need NFS help set up for the test esx host.  I use openfiler nfs and windows to UNIX servers to install the nfs server, but without success.  I have the following errors. Error in the configuration of the host: NFS error: unable to mount filesystem: unable to connect to NFS server Note: I need to configure something special on the esx service console host?  I have already installed nfs components and mounts.

  Audits:

  I can ping my server nfs, listening on port 2049, enable the firewall client nfs on esx host

  Anyone know where the steps by steps to implement nfs or openfiler for nfs work of a to z.

  Thank you for helping

  You should check your settings of double and proceed again, enable NFSv3 with ESX 3.x is very simple. To install NFS using Windows Services for UNIX, follow these steps:

  On NFS Windows 2003 Server:

  1. download the component on microsoft.com

  2 copy the/etc/passwd and/etc/Group password of ESX 3.x folder c:\etc\ windows host.

  3. install on your windows 2003 server and choose the "custom" option and choose "User mapping Service" and point the to these 2 files in c:\etc\

  4. use Windows to Unix admin console add 'administrator' and 'root' and click 'apply '.

  5 create a share as 'd:\data\sharefolder' and click on the tab 'NFS Sharing' and pass 'read/write' option and allow root access.

  On ESX 3.5 hosts:

  1 turn on the firewall for the NFS client settings

  2 chkconfig nfs and portmap autostart level 235 as mentioned

  3. create the network porgroups as (SC, VMotion, Production, Test, iSCSI, NFS) make sure you use different subnet for NFS/iSCSI traffic.

  4. you can customize your files /etc/hosts.allow and /etc/hosts.deny to hold account access restrictions. for example (rw, async, no squash root)

  5 restart your NFS daemon.

  Notes:

  Allows you to add storage wizard NFS Client VI-> the server name or IP address (this is your nfs server) and (mount point) such as /sharefolder and give him a "(NFS LUN01) label something like that."

  Check your ID, permissions, and settings, and ping them test information.

  Nothing else I can think of at this point if its does not work. Everyone is welcome to jump in.

  Best luck!

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• Set up for the signature of 10 BlackBerry applications (error: null)

  Hello

  I am recording my WebWorks for BB10 debugging application token so I can try an application on a device (Playbook). I followed the exact steps that lie in this documentation: https://bdsc.webapps.blackberry.com/html5/documentation/ww_publishing/signing_setup_bb10_apps_200839...

  When I run the command:

  blackberry-signer -register -csjpin 
      -storepass  
      
  

  All I get is the following:

  Info: File created CSK

  Error: null

  He does all the work and failed in the last step which is supposed to create the author.p12 file. The ' error: null "really doesn't tell me much about what is the problem. The people who work on it really should display error messages that are more appropriate.

  So my question is: Y at - it a newspaper or something that I can work on this error? Does anyone have an idea what is a failure because I did several times and each time that I make sure that I don't the steps correctly, so I do know not what is happening here.

  I would really appreciate help with this.

  Thank you

  I'm all in Windows 7 and I installed SDK BB10.

  Hello

  Could you share the exact command you run for blackberry-signatory? In this case, we'll pretend your PIN is MYPIN and KeystorePassword MYKEY.

  Also, could you please confirm if all the files (sigtool.db, sigtool.csk and author.p12) exist in this folder:

  %HOMEPATH%\AppData\Local\Research in motion

  Alternatively, it may be worth trying this registration / P12 generation with the help of graphics:

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/BlackBerry-Tablet-OS-graphical-aid/TA-...

  Normal 0 false false false fr X-NONE MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} http://opensignalmaps.com/reports/fragmentation.php

• on the configuration of system for computer hp laptop g60-125nr

  When I do the system configuration system normal startup still in safe mode. tried system restore, but it is in safe mode. to exit safe mode, the only is selective startup, and then restart. everything I read says that when you are finished with the configuration of the system, you must restart in normal tsartup, but I can, t.

  HELP----------------

  Hello

  The file is safe - you can always display the registry entries first extracting the download and then open it in Notepad.

  DP - K

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• WebWorks BB10 build error.

  EDIT: I have the same problem using the following command line (IE without ripple):

  bbwp v:\first\out\morfGPS.zip-d so that I presume that there are no associated ripple (edited title).

  [BlackBerry 10 SDK 1.0.0.15 WebWorks]

  When I build my application with ripple, I get the following error in the console:

  Could not find the feature with id: blackberry.system.event

  I have read the FAQ of PB and learned I have to respect in the strokes and then added hirachy before the .

  Still no luck... any idea?

  PS: the "" is present in the BBui.js documentation, especially why it is in mine. Thought it was necessary...
  

  
      http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets" version="1.0.0.0" rim:header="MorfGPS" id="SuperMorf">
      MorfGPS
      blah GPS and utilities App
      Antoine (Superfly_FR)
      
      
  
      
          
      
      
  
      
      
      
      
  
  
  

  
  

  Events for BB10 are managed differently.

  Add events with blackberry.event.addEventListener.
  The events are in different areas.

  You need not add blackberry.app.events to the config.xml file. Add/removeEventListener are always available.

  (personal note: so goes for blackberry.app.event if you refer to my above config.xml file)

  However, you do not have to add a feature that contains the actual event you want to play.

  Thanks to Ken Wallis.

• Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

  Hello gurus,

  : Server 1 HFM

  : Server 2 FDM

  Server 3: Database server

  1. I have managed to create an application of FDM using FDM web client.

  2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.

  3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.

  4. we have then configured the adapter with success.

  5. we get the following question when browse us the metadata -> control tables

  Cannot retrieve the data on the target system

  6 log has the following entry

  Error:

  Code...-2147220966

  Description... System.Runtime.InteropServices.COMException (0x8004021A):

  {0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error

  at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)

  at fdmFM11XG6C.clsHFMadapter.fConnect)

  Process... clsFMAdapter.fConnect

  Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll

  Version... 1116

  Identification:

  ... The admin user

  ... Computer name < servername FDM >

  Connection of FINANCIAL MANAGEMENT:

  Name of the application...

  Name of the cluster...

  Field...

  Connect status... No open connection

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.

  -------------------------------------------------------------

  ERROR:

  Code............................................. 10054

  Description... Adapter function [fConnect] failed.

  Process... clsBlockProcessor.DimensionList

  The component... upsWBlockProcessorDM

  Version.......................................... 1112

  Thread........................................... 80304

  IDENTIFICATION:

  User............................................. admin

  ... Computer name < servername FDM >

  Name of the application... < name of application of FDM >

  Client App....................................... WebClient

  CONNECTION:

  Provider......................................... SQLOLEDB

  Server data... < database server name >

  Name of database < database name >

  Trust connect... Fake

  Connect status... Open connection

  GLOBALS:

  Location......................................... Sample

  Location ID... 748

  Location Seg... 2

  Category......................................... WLCat

  ID of the category... 12

  Period........................................... Oct - 2013

  Period ID........................................ 10/31/2013

  POV Local........................................ Fake

  Language......................................... 1033

  User Level....................................... 1

  All Partitions... True

  Is Auditor....................................... Fake

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.

  -------------------------------------------------------------

  ERROR:

  Code...-2146818234

  Description... Adapter function [fConnect] failed.

  Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList

  Any help will be much appreciated.

  Thank you all for your help...

  It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

  Keep the username blank password in the configuration of the machine profile has solved the problem.

• Configuring RMAN for dataguard.

  Hi all
  
  Here we have an environment dataguard with db1 (db_unique_name) as primary and db2 (db_unique_name) Physics of the standby database. For primary and secondary the ORACLE_SID is "oracledb." We have configured dataguard in environments of 10 g and we don't use a grid control. And now we want to configure rman for incremental backups. We use a third database of catalog which we recorded primary DB successfully. When the primary configuration of rman is show conflicts. Even changes to the main configuration of RMAN are applied on the standby too who I think shouldn't happen in this scenario. How to solve this problem? Is what is happening because of the ORACLE_SID even for primary and secondary school? I enclose the link from the doc, we also followed the errors and configuring in rman. Can anyone help?
  
  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/RMAN.htm#BAJFBBBB
  
  
  RMAN > CONFIGURE ARCHIVELOG DELETION POLICY APPLIED PENDING;
  
  new RMAN configuration settings:
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
  new RMAN configuration settings are stored successfully
  from full resynchronization of the recovery catalog
  full complete Resync
  RMAN-08591: WARNING: invalid archivelog deletion policy
  
  RMAN > set UP DB_UNIQUE_NAME db1 CONNECT ID "db1".
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'db_unique_name': expected an a: ' archivelog, auxiliary, auxname, backup, channel, controlfile, clonename, compatible, datafile, device, by default, exclude, encryption, maxsetsize, retention, instant.
  RMAN-01007: line 1 column 11 file: entry standard
  
  
  RMAN > show all.
  
  from full resynchronization of the recovery catalog
  full complete Resync
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 2 DAYS WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_NIOS.f'; # by default
  
  
  Thank you.

  Hello

  You must set log_archive_dest_2 (for the standby database) mandatory
  Like this

  alter system set log_archive_dest_2= 'service=standby lgwr async valid_for=(online_logfiles,primary_role) *mandatory*';
  

  try again the configuration of the deletion of journal policy archive on RMAN.

• System for HP laptop recovery

  Hello

  I have a laptop HP (HPG62 Notebook PC), with Windows 7, purchased in 2010. Recently, I received a message saying «you are not running Windows genuine, Reolve Online» When I tried windows update, the answer was Windows Update Check failed.

  On the "Computer" icon, if I check the properties, I do not see the system information. Says "failed to load the page.

  So I performed a system recovery. I got a response after a while "system restore failed.

  I tried to turn on the computer, I got "BOOTMGR" does not exist. Press Ctrl-Alt-Delete. When I did, repeated the same message. I pressed ESC, then he gave me of choice for some of the tests:

  I ran a few tests of system, I got following error:

  INTELLIGENT control: passed

  DST short: FAILURE

  FAILURE ID: OLU7HV-57E6AV-XD003F-60R403

  PRODUCT ID: WQ767UA #ABC.

  Hard drive failure.

  Any help is appreciated.

  ic_engr

  Everything worked well. I have re-installed the drive HARD and also CDs.

  However, I am not able to get the update of windows (win 7) or because windows Defender starts.

  Concerning

  ic_engr

• How to set system for Veristand mappings using the API

  Hello

  I'm doing a VI that would map the channels system for me within a Veristand system definition file. I have a certain mappings to do and many of the names of ports are repetitive, so this should be easy to implement. I have attached photos of my attempt below. The Panel displays the results. The indicators get Sources and Destinations show mappings that I did inside Veristand himself.

  I used the block of EEG channels in LabView to check the structure of the path and you can see on the indicators to get the Sources and Destinations is that they are correct.

  I intend to throw this in a loop and incrementing number to all my connections.

  Thanks in advance,

  Brent

  I wrote a very similar code and it seems to properly configure the mappings for system for me as long as I have the definition file closed during execution of the VI system.

• non system disk or disk error, windows 98

  I have the chromatograph with P IV system with windows 98. He began to display non-system disk or disk error. Please help and guide me if this hard disk can be used in the version of windows before this error. Because the software of the GC settings that windows and we have no backup. Also tell me if the hard drive partitions can be recovered after formatting and it can be restored to the operating system before the error.

  answer me on this email ID. E-mail address is removed from the privacy *.
  Kind regards

  Zafar Iqbal,

  Faisalabad.

  Support for Windows 98 ended on July 11, 2006.

• Whenever I have shut down my system, I get an error of "nlsphelp.exe".

  Original title: nlsphelp.exe

  Whenever I have shut down my system, I get an error box "nlsphelp.exe". What can be done to fix this?

  See you soon

  The nlsphelp.exe has nothing to do with a virus.

  It's the NetLib SQL Service Helper Service (not found on a general XP installation).

  Now you or you already had versions of SQL Server installed on your system of unspecified of brand and model with the unspecified XP version and Service Pack?

  If not, it may belong to a third-party application you have installed or it might be some something remains either of something that you have uninstalled before this incident.

  If you are not sure whether you need it or not, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet and locate the assistance of NetLib SQL Service Pack Service, right click, properties and after making a note of the current startup type, set the startup type to "Disabled", reboot, run for a while and see how things work without it.

  If you find things that don't work without it running, set the startup type to what it was before and pick up another idea.

  Is it your desire, you can also delete the Service completely so that you will never see it again.