Configuration update changes returning failure

Similar Questions

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Default configuration updates/changes...hang

  Hello

  I come here with a difficult problem... I have a Probook s 4740. It comes preinstalled with Windows 8 and HP security tools. Recently, I decided to upgrade to 8.1 Windows and for that I had to uninstall HP security tools. I did the uninstall and update of Windows. After a day of using the computer hang. I have updated using HP recovery. As the version of the OS was old he himself day after a day or two. The update went well. After starting windows the next day he started the configuration of updates. Something went wrong and it failed with: "Failure of windows configuration updates from reinstatement of changes". She suspended and never finished. I've refreshed believe once again that it does not refresh correctly. All of this happens again. After updating once again, then whole reinstallation of windows, the problem persists. At this point, I updated the computer 4 times and reinstalled Windows 1 hour. I tried to disable all the services non-windows and update according to the guidelines of this forum: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Failure-configuring-Windows-upd, but it did not work. It failed with: "default configuration changes in windows. Changes in return ".

  What should I do? My laptop is still under warranty of extednded. Can I make a soft/hard reset or take my computer of sevice? I hope I can solve this on my own as being without my cell phone would be very inconvinient. Other solutions? If you need further information please tell.

  HP Probook 4740 s

  Product number: H5K32EA #BED

  OS: Windows 8 pro 64-bit

  Best regards, Tony.

  Use the HP recovery media to access the Microsoftsystem to restore and then choose a restore point dated before the update of events that caused the stroke.

  

  Note the number of the update and make sure that you leave not only one install new. You can do that by changing the update of Windows settings from install automatically to informez me update availability, but let me decide to download and install updates.

• After you install Internet explorer 9, receive error message "failure of configuration updates changes recovery" BUT the update history shows successful

  Running Windows Vista and it is impossible to update to Explorer 9.  Also successful shows in "installed updates", but does not appear in the option "uninstall update"

  Hello

  ·          Are you able to access Internet Explorer 9 and use it?

  ·          When exactly do you get this error message?

  ·          You get this error message every time that you start the computer?

• configuration update failed, return to original

  Hello

  After I restarted my laptop, system tried to install updates, then I got the message that the configuration has failed and his attempts to revert the changes. Problem is that he's stuck on it for hours and I can't go in the system, any ideas what to do?

  I have sony vaio and win8

  Thank you

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that your PC is blocked failure configuration changes back updated Windows. I will certainly help you to question.

  I would like to know some information:
  (3) you have the disc to install Windows 8?
  (4) don't you make changes to the hardware/software before this problem?

  Also, I suggest to perform the system restore and check if it helps evoking the steps mentioned below:

  1. Insert the Windows 8 install disc into the drive and restart the computer.
  2. When you are prompted to start from the disc, press any key any.
  3. Press or click on repair your computer.
  4. Press or click on help and then press or click Advanced options.
  5. Press or click on your version of Windows 8, tap or click System Restore, press or click on the restore point you want, and then press or click Next.
  6. Follow the instructions on the screen to complete the restore of the system and when you are prompted, restart your computer.

  Once the system boots, you can also check out the link below:
  https://support.Microsoft.com/en-us/KB/949358

  Important notes:

  * When you use system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  * Check out this article and refer to the section warning, you can copy the section warning like warning when you provide Refresh or reset in Windows 8 or 8.1 Windows

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Thank you.

  Sincerely,

• Updates to Windows 8 - "Configuration of the Windows updates, changes in restoration failure"

  Hello

  Recently I finally got my laptop back from repairs after 6 weeks. Now, it is in a 'clean' State (aka factory settins).

  I wanted to get to 8.1 Windows as soon as possible, but for this I need to be on the latest version of Windows 8.

  So I then try to run "Windows Update" and let it install all updates recommended. He manages to download all updates,

  and then he tries to configure these. About 98% or 99%, it gives the following message:

  'Configuration of the Windows updates, changes back failure'

  It then goes in an infinite loop constantly, he ran for hours and hours without having passed this screen.

  So far, the only solution is to reset it to factory settings, which brings me to the point before that I try to update, so it is not move me.

  I've tried so far, but no luck what follows:

  • http://support.Microsoft.com/kb/949358/en-us
  • http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/16219e5c-564b-4310-9f68-c9d595bb4cbe?page=1
  • http://support.Microsoft.com/kb/971058

  None of them has worked so far.

  To be clear:

  It is an OEM license. This doesn't mean no DISC, nor any ISO/Exe could work that they do not accept the product key.

  Many other people have the same problem.

  Please, I'm at a loss to date.

  Yours Sincerely,

  Leon

  Hi all

  Seems that I myself have found a potential workaround.

  Install only the KB2871389 allowed me to grab the download of Windows the Windows store 8.1.

  Then, I could install Windows 8.1 without a hitch and it normally seems using Windows Updater runs from there on.

  It is not yet a waterproof solution to water / final of 100%, but it seems to work for me.

  I hope this will help someone else with the same problem!

  Yours Sincerely,

  Leon

• Windows 7 fails to configure updates "returning from the changes.

  Hello

  I get this message after Windows tries to install updates at startup... "failure of windows configuration updates from reinstatement of changes"

  1. once I get this message that I start correctly on Windows and that my system works ok.

  2. Windows 7... 64-bit... .latest service Pack installed.

  3. it was an upgrade of Vista 64 bit... but works very well since 8-2010 when I installed Win7

  4. I ran sfc/scannow and it reports that everything is ok

  Any ideas?

  Thanks in advance

  Thank you that worked for me even if I don't have to go to the Microsoft download website.  I checked the history of update and there were a few who failed to update.  He said there was updates had to wait to be downloaded so I clicked on that and then selected the updates, click on the bottom. I think he may have said then or download it now.  It took me back to the update page where I chose to update.  Which corrects the problem.  I have them one at a time incase there was a special that was causing problems, but they fine all the updates and my computer restarted normally

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Error Windows Updates 'configuration of Windows updates fail, returning of the changes.

  Updates to the title: original Windows.

  That means 'configuration of the Windows updates fail, returning from changes '? My laptop has been updated but got stuck on 12%, and would not go further. It is restarted 3 times and only went up to 12%.

  Was actually able to solve this problem through more research. It turns out that his receiver of wireless mouse and a SD card was stalled the installation program. I don't know why but I turned off the machine (long press the button), remove, checked all other ports, block tire and cord then put back the battery and card, turned on and it ran through the installer without problem.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Configuration failure update changes back windows

  Just today, I was on my windows high tower 8 ASUS) that worked very well until I noticed this message saying that the computer will restart soon to update so I clicked on the update and restart for all has updated but when I finally thought he would have started working, he says "failure in windows update changes recovery off not your computer" honestly I don't know what to do because I just got this computer as a week ago. I can't restart or do something for the computer, he's stuck on this message. At one point he did stop saying could not configure windows update but two ways it continues to flow to the same thing. Can someone please help me, I tried everything but nothing works. !

  PLEASE HELP ME!

  Start here: http://support.microsoft.com/kb/949358

• the windows failure configuration updated of changes back

  I have a Dell inspiron 15. I had windows 8.1 on my computer. I was took in charge of affairs with services being disabled on my computer. I couldn't access the apps on my computer sounds. I did the restore form where my personal files were not deleted. Restoring over and informed me that I had 99 updated. Updates went too far that reboot and configuration.  Then the failure message would appear and stay on the screen for 30 minutes. The computer should restart and the failure message reappearing. Reboot and the failure message would be a loop. I have never access the logon screen, start menu or desktop. Y at - it a solution to help me. I looked at the other discussions. Is there a solution that will preserve my files?  Thank you in advance.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Failure to configure updates

  Update download install but will not configure and change then go back where failure download updates

  Hello

  ·         Are you able to boot to the desktop?

  ·         Update is causing the problem?

  ·         You get the error message?

  Method 1:

  I suggest you to put your system to boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

  Method 2:

  If the clean boot does not work, follow the steps in the link below:
   
  How to reset the Windows Update components?
   
  http://support.Microsoft.com/kb/971058
   
  You can also use the "Fix It" solution mentioned in the article above.

  Method 3:

  If the problem persists, try running the system tool for Windows Vista update and check if it helps:

  http://support.Microsoft.com/kb/947821

  Hope this helps,

• Problem with updates on Windows 8 - Configuration has failed & returning Exchange

  First of all

  I want to apologize for asking questions about the problem which has been solved so many times...

  ... and yet it seems that no solution applies to / solved my problem.

  Let me describe my situation and context "briefly":

  I have install Windows 8 Pro, I have installed in September 2012. I had been provided with Win 7 and Win 8 activation as a computer SCIENCE student keys during my studies. I have not used 8 win a lot since I preferred Win 7 and I only wanted to test the 'product '.

  Judging by the time when previous updates have been installed, the system was launched several times in March 2013, December 2013 and January 2014. After that, the system "folded" so far. When I launched the system on 26.07.2015 there was like 50 updates that have been prepared (or wanted to be installed... Let's say "pending"). About 30 of them installed successfully. Then I double-checked. I used to double check the availability of updates when some fail to install (mainly from my previous experience that sometimes an update is no longer necessary when another installs).

  Now, to the point...

  I have 133 major and 3 optional updates that want to be installed. Everything that I select (few of them), or all of them fail to install. Installation begins normally, then needs to restart (all) and during the nex to the top starting, the updates can "Configuring updates... 98% ' and then fail and are starting to go back.

  The system is more or less vanilla installation with some basic drivers and the 3DMarks so I doubt that I've caused this problem.

  I've been googling and try to solve this problem for 5 days now, here's what I found:

  1. first of all, I tried sfc / scannow to see if there is any corruption. I received the message that some files were corrupted and could not be repaired. The launch of 6 and 7 of this order, I finally got the "Windows Resource Protection has not found any breach of integrity." (it is true however that I tried a lot of solutions in the meantime). However before that, the CBS.log newspaper included information that:

  Cannot repair Member "utc.app.json" file

  (also of telemetry ".") "ASM - WindowsDefault.json" and I think that 'Amd64\CNBJ2530. PBO' have been mentioned... several times)

  But as I said, from this moment I do not have this problem.

  2. because I had problem with CFS, I tried DISM.

  ScanHealth gave:

  The component store is repairable.
  The operation completed successfully.

  However, RestoreHealth was not optimistic:

  The restore operation failed. Be the source of repair was not found or the comp
  onent store is not repairable.

  The journal includes:

  Preparation of control system was updated.

  Summary:
  Operation: Detect and repair
  Result of the operation: 0x0
  Last successful step: any operation is complete.
  Total of Corruption detected: 0
  CBS manifest Corruption: 0
  CBS damaged metadata: 0
  Corruption shows CSI: 0
  Corruption of the CSI metadata: 0
  The Corruption of the CSI Payload: 0
  Total fixed Corruption: 0
  Repaired CBS manifest: 0
  Manifesto of CSI repaired: 0
  Repaired CSI payload: 0
  CSI store metadata refreshed: true

  3. the 'solution' next I'm focused on a system reserved partition. I came to the information Windows 7 uses 100 MB Sys. Reserved partition while Windows 8 uses 350 MB. I think I stumbled on information that it can be connected to the problems so modified the partition of provision (safely, in regards to the system reserved partitions and Windows 8) and increased the extra partition of 250 MB. This however proves to not be connected.

  4. some sources claimed that C:\Windows\SoftwareDistribution/download content may be the case. So after the Windows Update service has stopped I deleted the download content (I think on 1 try I deleted event pending.xml from WinSxS. Of course then I restarted the redownloaded updates of service, etc...

  5. I tried the update servers MS Windows Diagnostic.cab (just for the record, this tool renames pending.xml among others). This diagnosis is always problems no matter how many times I launch. It shows sometimes 2, sometimes 3 questions for example:

  

  Here are the main 'solutions' that I tried, but as you can guess, none of them worked. Just for the Windows registry has reported these problems viac Action Center:

  

  And I also found some information in WindowsUpdate.log:

  2015-08-02 01:27:28, error CSI 00000004@2015/8/1:23:27:28.681 (F) CMIADAPTER: failed. HRESULT = c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)]
  Element:
  [163]""
  [gle = 0 x 80004005]
  2015-08-02 01:27:28, error CSI 00000005@2015/8/1:23:27:28.681 (F) CMIADAPTER: out with HRESULT = c004f01f code [error, facility = FACILITY_ITF, Code = 61471 (0xf01f)].
  [gle = 0 x 80004005]

  2015-08-02 01:27:28, error [0x01803c] CSI 000000db Failed (F) execution of the installation queue item: SppInstaller ({1b265fd2-721c-4e59-ad55-9d102a5d1d7f}) with HRESULT c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)].  Failure will not be ignored: a restoration will begin after all operations in the queue of the installer; Setup is reliable (2) [gle = 0 x 80004005]

  Here, the infamous rollback is mentioned. I was not able to identify the exact update (or updated) what causes these cancellations so I hope it's something I could be helped with at least. The internet is full of KBs that this cause so I can't count on that, at least for now. I also want to note that I tried everything under boot. And also can not clean installation since I have no more join the MSDNAA where I had as a student activation key. I hope that I could upgrade to Windows 10 without him in the coming months, so that's why I concentrate on getting this environment to work and migrate to it in time.

  I'll be very grateful to anyone who can help me with this problem.

  In & out.

  John

  Given that no one could help you, I myself helped ^^.

  First of all, to all those who have problems with the fact that their updates install suddenly, you must change the settings for Windows Update. Change the option other than an automaticall installation (I used the automatic download, manual installation). In this way, you can install the updates in smaller batches. Personally, I installed updates to 5 or 10 (or almost). The updates that have been tens of MB, I installed only. What struck me most surprised, I could (at the time) to install all updates. In the case where you wouldn't you know at least certainly update you need to solve the problems.

  After all updates have been installed, I turned on the automatic download and installation.

  Concerning

  John

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.