Configure several voice prompt on ISDN GW 3241

Similar Questions

• Rules of ISDN GW 3241

  Hi all

  I have set up next week an ISDN gw 3241.  I've done a few readig on it (the user guide and other cisco docs).

  In my implementation we hane one ISDN gw with 1 E1 (several DID).  several points of video endpoints (VEP) will use this ISDN gw.

  All IP VEP are registed to the VCS.

  I want to set it up this way:

  IP for ISDN

  No matter what IP VEP, when calling IE 88XXXXXXX (88 is the prefix of video isdn gw), the call will be routed to the ISDN GW.

  ISDN to IP

  If the remote call of VEP ISDN GW number + 44335xxxx01, call get routed to IP VEP1

  If the remote call of VEP ISDN GW number + 44335xxxx02, call get routed to IP VEP2

  If the remote call of VEP ISDN GW number + 44335xxxx03, call get routed to IP VEP3

  If another number in this range is this is to say composed + 3245xxxx06, appeal to be rejected.

  Can someone share some shots of a configuration of ISDN gw with commentary and similar rules? Thanks in advance.

  Kind regards

  Hi friend

  With regard to the fraud free, I usually use a simple methodology that brings a security level pleasant without requiring a complex configuration. CPL is a nice option too, but it's too complex in some environment, and it is difficult to manage and troubleshoot in my opinion.

  Normally I restrict access to the ISDN gateway by only search rules. Try this:

  1. Let's say your code access to the PSTN is 9. If your end points would call a PSTN number dial 9 + number.
  2. Let's say that your ISDN gateway is to register the prefix 9 for VCS, so that when you dial 9XXXX the call is routed to the ISDN gateway that is registered in the local area of VCS
  3. Create a rule to search specific to ISDN calls, see example below, examine the marks:

  

  Please, follow all the instructions, I mentioned above, it is so important.

  If you have several access codes to the PSTN, you can create several rules of research as a result of this procedure, or you can use a regex to sum up the roads. For example, let's say you have 99, 98 and 97 as codes PSTN, your template string may be (99 | 98 | 97) \d*. This route matches any number including the prefix is 97 or 98 or 99.

  Another important consideration is, if you have PSTN access codes (not having not makes no sense), you need to design a numbering plan that avoidsmismatch between your access codes to the PSTN and your alias and routes. It is extremely important! For example, the suggestion that I placed above, you should not have any endpoint whose alias begins in 9 , because it would result in a conflict with your ISDN search rules.

  Prior to performing any configuration, save time for thinking and planning. I also suggest make you several test after the implementation of your ISDN integration with free fraud prevention.

  I hope that this is useful.

  Best regards

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• ISDN GW 3241 - security SIP

  Anyone know if this is in the roadmap an improvement on SIP/security settings in the ISDN GW 3241?

  We where to check the config and we couldn t find a way to configure the GW (version 2.2 (1.79) P to use SIP and avoid using non desired.)

  When the Dial Plan (IP ISDN) is configured as SIP or other, there is no configuration in the Don t Gulf war do not accept calls from any device that sends an INVITATION.  It takes a SIP trunk configuration, to make a relationship with her pair (only accept call form SIP trunk sources, certificates, etc.).

  Any idea?

  It is an impact on deployment of client (Government).

  Thank you

  Ok. Thanks for the answer (of course side would be also appreciated :-) of marking

  Not to mention that sometimes some information of the road map are mentioned here I would not wait or wait until it

  as this is a public forum, but the road map info is often under NDA.

  I recommend you talk to your partner about Cisco / contact and see if you can get a presentation of the road map

  and also note the impact for your deployments and possible feature requests for them.

  Hope that answered your question :-)

  Martin

• Configure several IPSec VPN between Cisco routers

  I would like to create multiple ipsec VPN between 3 routers. Before applying it, I would like to check on the config I wrote to see if it works. It's just on RouterA configuration for virtual private networks to RouterB, and RouterC.

  As you can apply in a cyptomap by interface, I say with the roadmap, that it should be able to manage traffic for both routers. Or is there a better way to do it?

  RouterA - 1.1.1.1

  RouterB - 2.2.2.2

  RouterC - 3.3.3.3

  RouterA

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key RouterB address 2.2.2.2

  ISAKMP crypto keys RouterC address 3.3.3.3

  invalid-spi-recovery crypto ISAKMP

  ISAKMP crypto keepalive 5 10 periodicals

  ISAKMP crypto nat keepalive 30

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set AES - SHA esp - aes 256 esp-sha-hmac

  !

  outsidemap 20 ipsec-isakmp crypto map

  defined peer 2.2.2.2

  game of transformation-AES-SHA

  match address 222

  outsidemap 30 ipsec-isakmp crypto map

  defined peer 3.3.3.3

  game of transformation-AES-SHA

  match address 333

  !

  interface GigabitEthernet0/0

  Description * Internet *.

  NAT outside IP

  outsidemap card crypto

  !

  interface GigabitEthernet0/1

  Description * LAN *.

  IP 1.1.1.1 255.255.255.0

  IP nat inside

  !

  IP nat inside source map route RouterA interface GigabitEthernet0/0 overload

  !

  access-list 222 allow ip 1.1.1.0 0.0.0.255 2.2.2.0 0.0.0.255

  access-list 223 deny ip 1.1.1.0 0.0.0.255 2.2.2.0 0.0.0.255

  access-list 223 allow ip 1.1.1.0 0.0.0.255 any

  access-list 333 allow ip 1.1.1.0 0.0.0.255 3.3.3.0 0.0.0.255

  access-list 334 deny ip 1.1.1.0 0.0.0.255 3.3.3.0 0.0.0.255

  access-list 334 allow ip 1.1.1.0 0.0.0.255 any

  !

  !

  RouterA route map permit 10

  corresponds to the IP 223 334

  Hi Chris,

  The two will remain active.

  The configuration you have is for several ste VPN site is not for the redundant VPN.

  The config for the redundant VPN is completely different allows so don't confuse is not with it.

  In the redundant VPN configuration both peers are defined in the same card encryption.

  Traffic that should be passed through the tunnel still depend on the access list, we call in the card encryption.

  This access-lsist is firstly cheked and as a result, the traffic is passed through the correct tunnel

  HTH!

  Concerning

  Regnier

  Please note all useful posts

• configure several types of measure

  I use LabVIEW 2008 and a data acquisition system Agilent 34970 A.

  I need to read the voltage of 3 channels and temperature of more than 2.

  I know how to set each of them separately using a CONFIGURATION command to the top, and I was wondering if there is any way to configure two types of measures in a single command.

  If there is an easier way to do the total that would be awesome. I'm still very new to LabVIEW.

  Thanks in advance and let me know if you need more information,

  Kat

  Nevermind figured it out.

• Configure several simulators in Eclipse

  Hello

  Does anyone know is it possible to have several simulators in eclipse and

  How to set up that?

  Thanks guys,.

  Praveen Singh

  Yes it is possible.

  first install all the simulators that you want and open the same workspace through all the version of Blackberry Eclipse plug-ins you have such as 5.0, 6.0 and 7.0.

  Now, check, you will get all simulators in your eclipse you have installed.

• Configure several CPU with HA

  I am runing 3 server cluster, with ESX4.0, with 24 GB of memory each and Dual CPU

  vCenter Server Standard 4

  case 1

  case 1

  vSphere 4 Enterprise (1-6 cores per processor)

  6 processors

  6 processors

  I can not configure more than 1 CPU if I activate HA, is there a limitation with license

  There is a limit of 1.0 FT know.

  See also: VMware FT

  André

• The sound on Youtube repeats in about half a second then several voices

  The audio on YouTube starts, then about half a second later the same sound again so both play at the same time. It is so distorted I can't sound for one of the videos.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Bad configure several features.

  I use Corel Paint Shop Pro for small projects for a number of years, however, now that I'm starting to become more seriously in digital painting I'm discovering that the program does not work very well, so I will try to find a replacement program. To this end, I downloaded a trial of the latest version of the items. However... I searched for help, and am still having trouble to find a number of things.

  -How do you see multiple images side-by-side when editing? The only indications that I can see are for version 7, and that they are not accurate for this version.

  -Is it possible to zoom in and out on a picture, in part using the Magnifier tool?

  -How can I get an accurate count of the number of colors in an image? Yes, I realize that for most it is not really important. However, I often work on projects where it is essential that I am able to verify the exact number of colors in an image, and it is very annoying to need to open it in another program to do.

  -Is it possible to change the pointer that appears when using various tools? In addition to the large tables, I often work on SNES, and the pointer that is displayed on the scale of a pixel is extremely annoying and difficult to work.

  I am sure that most of the other problems I have got experience currently is mainly to the difficulty of the transition to a new program when I'm used to the way another is put in place. However, one of the foregoing could turn into a was he or break factor, hassle-wise. Any help would be appreciated!

  The latest Help for pse9:

  http://help.Adobe.com/en_US/photoshopelements/using/index.html

  Solutions:

  1 in image mode tabbed mode by default in the elements and similar to

  Paint shop pro, the menu arrange to view the images side by side

  

  2 to edit > Preferences > General, see Zoom or using the browser scroll wheel

  Window > Navigator or keyboard shortcuts Ctrl (cmd) - Ctrl (cmd) +

  3 need a plugin for the number of colors (I need to find the link)

  4 pointers: Edit > preferences > General > display and cursors

  MTSTUNER

  Post edited by: MTSTUNER

• 3241 GW ISDN with CUCM 10.5 or VCS

  Hi all

  What is the best practice to deploy ISDN GW 3241.

  It connects with CUCM or VCS control?

  How to connect it with CUCM or VCS?

  Kind regards

  There are some basic steps in the Quick Start Guide and there is more information on the different ways to configure it in this thread: https://supportforums.cisco.com/discussion/11580051/isdn-gw-3241-admin-config-guide

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Gateway ISDN without control of VCS

  Hi team,

  We have a Cisco CUCM v 10.5 deployed and all voices and video endpoints registered to CUCM only, now I want to integrate Cisco ISDN GW 3241 CUCM, is it possible? (as the way we add voice gateway) or ISDN GW work will remain alone (by registering on the internal Porter)?

  Please suggest...

  My recommendation would be to implement the ISDN gateway as a standard SIP trunk and configure your dial plans to ensure that the PSTN calls get routed to the ISDN gateway. You should be able to use TCP or TLS Protocol (assuming you get certificates set up correctly), but I would recommend using only "early" in the SIP profile.

• Voice messages using BT headset

  I got a Motorola Droid X, I've recently upgraded to a Samsung GS3. The S3 is missing which, in my opinion, was the best feature of the X was for him - vocal all using a Bluetooth headset. When you try to make a call using my headset, I pushed the button on the helmet and the X has said something like "Please wait. Please say a command. " Then, we could say a lot of different things. If you have already told him to call someone and they had several numbers, he would ask you that we. Then he would say "Calling 'contact'." This S3, when you press the button on the headset to answer "beep". And that's all you get. No matter what. If your contact has several numbers, it says a "beep". If you look at the screen, you can tell what is happening but it is the only way.

  I took it back where I got to see if I had missed a framework and the seller he was trying. He asked to call a contact, I called Terry. I called a named Justin. The family name were not similar either. Terry started with an M and a Justin Q. Never had this problem with my X.

  But here is my question. The line does Razr HD has these voice prompts like the X did? If so, I'm on my way to exchange for one immediately.

  Thanks for any help you can give me.

  John T

  He did as well as My bike talkwhich adds texting application

• Why my Wimdows Vista Ultimate PC decided, after several months of operation, that my copy of Windows is not genuine?

  My computer runs for several months; A week ago, my family told me that the machine stated that my installation is not authentic.  As I have already said, the product had been activated months ago, Security Essentials is installed and has been active; all updates had been installed as rerequired.

  I tried to turn it back on and got the error 0x8007000D code; "More information" fits the description "these data are incorrect.  I entered the Product Code and tried that gave the same answer.

  Choose one of the other options, I tried to activate by the automated phone system.  When ID Setup page, I don't get the code generated; even the boxes are not visible with just the numbers 1 to 9 above where I expect the 54 digits to display.

  I ran the Microsoft Genuine Advantage Diagnostic Tool - Version 1.9 0027 0 to see if that might shed light on the issue.  The tool gave:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 322WH - J7BTX-4YDWJ
  The Windows Product Key hash: EtnVPje5X + sPSkDjXul3JI288us =
  Windows product ID: 89587-OEM-7347626-17174
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.0.6002.2.00010100.2.0.001
  ID: {E90D811D-0868-41AB-BA0B-D2B4A7B68088} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Ultimate
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.120824 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Admin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E90D811D-0868-41AB-BA0B-D2B4A7B68088}1.9.0027.06.0.6002.2.00010100.2.0.001x 64*-*-*-*-4YDWJ89587-OEM-7347626-171743S-1-5-21-1434092577-1853125364-1800918340to be filled by O.E.M. power O.E.M. American Megatrends Inc.. P1.30 20080328000000.000000 + 000AB310500010000FA08090409GMT Standard Time(GMT+00:00)03109  

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1000, 9) (null): these data are incorrect.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/a, hr = 0x8007000d

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC0051 032808 APIC
  FACP A M I OEMFACP
  MCFG 032808 OEMMCFG
  032808 OEMB0051 LASRYVITRAGE

  I checked the other responses on this site and was able to identify a solution to this trawl.  I then rang the number of activation of phone service and ultimately refusing to press any button when the voice prompted me and received a person in India. I tried to go into the menu system and after four attempts that ending with the beingdropped of the call, I gave up on that game this call lasted 5 seconds that I asked the young woman at the other end a little louder and the appeal was abandoned.

  I went through the process again.  I'm a young boy who, after registering my name and my number, kept wanting to call me by my first name.  This boy had a strong accent or my ears listen with a strong accent; After that I asked him to repeat what he had said for the umteenth time, the call is dropped.  I tried again, the next boy began to taking me through the details of same there is no trace of call me first!  After going through the activation process, ' it's because you selected "Caps Lock" key has no ' a diagnosis so after stupidly, we went through the process three times, he admitted that he had reached the end of its scenario and said that he passed me to another agent.»  The call transferred correctly and I found myself with a boy with a Central American accent.  After the next through details - 15 minutes, it seems Microsoft is unable to transfer information from one country to another - this youth said that I have called the wrong country Chad, and that I would have called the number in the United Kingdom.  After that I owe her aknowledge and apologizing for his three errors; that he assumed that I had called directly, the second that he did not ask his self, his client, what number I had composed, the third that he had forgotten that I told him that I had been transferred from the India Call Center. I asked to speak to his manager, he said he would transfer me and the call dropped.

  Once more the breaking - and this time I'm back to a young woman in India.  I asked a number of folder I was having to repeat the same information, she refused and after I had as my my agin telephonenumber, she said that there was no record of my previous calls.  An hour and a half of my life sank without a trace.  At this point I remembered, why I have cleared my desk of the sharp impliments and heavy objects; the risk of self-injury and violence to others must be reduced.  Finally, the young girl generated a file number for me, 1187937351 and then told me that the technical team of the United Kingdom ends at 18:00.  So, not quite a 24/7company, eh Microsoft?

  I need now start the process again tomorrow unless someone reading this can mount an illumination.  My Vista installation had worked; It now States that it is "not true." I can't turn it back on.

  Help!

  Please try first to re-create the license store.

  Re-create the license store

  Go to start > all programs > Accessories

  Right-click on command prompt and select run as administrator - accept the UAC prompt

  Run the following commands in the command prompt window, press enter at the end of each

  net stop sppsvc

  (expect that the service is stopped before entering the following lines)

  CD %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform

  Tokens.bar tokens.dat REN

  net start sppsvc

  slui.exe

  After a few seconds, the Windows Activation dialog box appears.

  You may need to reactivate and/or re - enter your product key or Activation can occur automatically.

  If you are prompted for your key, use one on the COA sticker on the case of the machine

  Restart and after returns with a new report MGADiag

• ISDN-> disconnected IP calls

  Hello

  We have severel endpoints (C40 and 95MXP) with difficulties to follow connected ISDN/IP calls or even connect at all. Calls that crosses disconnect between 1 to 50 seconds. There is nothing no indication that calls are being disconnected with force.

  Sometimes the phone call seems to go nowhere, but the video end point really rings a few seconds.

  When the call is connected, we can hear the voice of the caller until the call is disconnected.

  I had (31) after log out message once.

  We have an ISDN GW 3241

  This rings a Bell with anyone?

  Best regards

  André

  The PRI channel could be out of sync and restarting resynch them.

• Order say and use to record multiple voices in a single order

  Hello

  I would like to know if it is possible to use the command say with several voice together and save it in a file.

  For example, I would to save the two 'Good morning' voices 'Bruce', also 'Hello' voice 'Thomas' to a same file bonjour.aiff

  I would write the command in this way, but it does not work:

  v Bruce "Good morning" - v Thomas to say 'Hello' o bonjour.aiff

  Have you had an idea, after all this is not possible in the native application.

  Best regards.

  Olivier

  You cannot use the say to do this.  Depending on how you're serious, you can create several speech synthesizers or output files, but you need synchronize their - different voices do not speak with the same hours.  You might be able to use something like a multi-track audio application to synchronize and save the output, otherwise you would need to use another utility (or write your own) to record the audio handset.