Configure the 2 network cards in a VM for MPLS LAN and the other for internet

Similar Questions

• I don't know what wireless network card driver to install for Satellite A200

  Hello

  Im trying to install the adapter wireless by Satellite A200 (PSAE0E) and can not make it work.
  The website offers different drivers and says that I have to click on "How to identify my wireless network card driver", but that the document does not exist.

  Can anyone help?

  Thank you

  According to the specifications of the laptop your Satellite has Atheros AR5006EX wireless network adapter.
  Download from http://aps2.toshiba-tro.de/wlan/

  Just choose the right operating system.

• my network card has been deleted by accident, so I can't use internet

  on my windows xp home eddition, I had trouble getting on the internet, so I went to the system network adapter, but I accidentally deleted it.  is it possible to recover or be able to get on the internet with the computer?

  Hello

  Try the methods provided below to solve the problem.

  Method 1:

  If you want to install the wireless network adapter in Windows XP, see the link provided below.

  Install a wireless network card

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/install-wireless-network-adapter

  Method 2:

  To install a wired network adapter, click the link below.

  Install a wired network card

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/install-wired-network-adapter

  See the links below for more information on network problems in Windows XP.

  Your network adapter does not work and Windows XP does not include a Compatible driver for the network card

  http://support.Microsoft.com/kb/315275

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

• An iSCSI hardware network card can be used for ordinary IP traffic?

  If I have a hardware iSCSI HBA card, it's a NIC where ESX could unload all iSCSI handling to, this card could be used for something other than iSCSI or it will only be dedicated to iSCSI traffic?

  In other words, for example, could vMotion or VM traffic more than NIC go too? (It obviously wouldn't be a good thing to do, but I'm curious to know if it is possible).

  If you mean an HBA full offload iSCSI, then the answer is no. The HBA actually operates all the management of the TCP/IP Protocol and presents the iSCSI LUNS to the host as direct-attached storage. If you go to the QLogic website, you can find a few whitepapers that explain unloading as well as certain patterns showing the CPU load with a THAT HBA full offload compared with active TOE NIC (such as HP/Broadcom).

  André

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• Grouping of NETWORK cards causing the ESXi to retransmit ethernet frames received.

  I had an HP Proliant DL380 G5 ESXi 5.1.0 connected to a Cisco 3750 Switch stack.

  All by performing a tcpdump on a host without a report, I discovered that he was under the bombardment with ethernet frames for the MAC address of a computer virtual located on a host across the data center. After a few brief troubleshooting, I discovered that I was able to stop those erroneous frames by disabling NETWORK adapters on my VMWare host group.
  
  I believe that in my situation when ESXi is configured to use two network cards to all frames received on vmnic0 and retransmits them on vmnic1 and vice-vesa. I experienced these symptoms when ESXi is configured for failover with an active adapter and adapter mode standby and I also experienced the same symptoms in the following load balancing configuration.
  

  
  

  Symptoms: some time after activating the load balancing, all frames Ethernet for the MAC address of a virtual computer on the affected host are broadcast on each switch port in the entire data center.
  
  Steps to reproduce:
  (1) implementation below configuration.
  (2) unplug the ethernet cable connecting vmnic1 and switch1 port gi2/0/4
  (3) run the host 1.1.1.1 EI - n - q tcpdump on any machine physics linux in the data center (don't even have to be connected directly to 1).
  Confirm there is no packet seen with the IP address of 1.1.1.1 destination
  (4) plug the cable between vmnic1 and switch1 gi2/0/4 port ethernet
  (5) wait 60 to 120 seconds
  (6) watch a burst of frames ethernet with the destination MAC address of the VM (which owns 1.1.1.1) in the output of tcpdump

  Cisco Configuration:

  hostname switch1
  !
  src-dst-ip port-channel load-balance

  !

  interface GigabitEthernet1/0/4

  Description vmnic0.host0 (NIC 1)

  switchport trunk encapsulation dot1q

  switchport mode trunk

  channel-group mode 4 on

  spanning tree portfast trunk

  end

  !

  interface GigabitEthernet2/0/4

  Description vmnic1.host0 (NIC 2)

  switchport trunk encapsulation dot1q

  switchport mode trunk

  channel-group mode 4 on

  spanning tree portfast trunk

  end

  !

  Interface Port-Channel 4

  Host0 description

  switchport trunk encapsulation dot1q

  switchport mode trunk

  spanning tree portfast trunk

  end

  
  Configuration of ESXi
  vSwitch0

  Grouping of NETWORK cards / Load Balancing: route based on IP Hash
  Grouping of NETWORK cards / failover detection network: link status only
  Grouping of NETWORK cards / notify switches: Yes
  NIC Teaming / relief: Yes
  Grouping of NETWORK cards / adapters active: vmnic0, vmnic1
  NIC Teaming / standby adapters: nothingness
  NIC adapters grouping / unused: nothingness
  Security / Promiscious Mode: reject

  Security / MAC address changes: accept
  Security / forged passes: accept

  
  #1 Virtual Machine port group
  Network label: 'Public '.

  VLAN: 27
  Grouping of NETWORK cards: all unchecked (inherited)

  #2 Virtual Machine port group
  Network label: "trunk".
  VLAN: 4095
  Grouping of NETWORK cards: all unchecked (inherited)

  VM kernel Port #1
  Network label: 'management '.
  VLAN: 2

  Grouping of NETWORK cards: all unchecked (inherited)

  VM #1
  

  OS: Windows Server 2003
  NIC 1 / adapter: Flexible
  NIC 1 / network Label: 'Public '.

  IP address: 1.1.1.1/24

  I apologize for the delay in my response.

  Unplug physically 2 cable NETWORK card on the host and configuration mirrored port on the switchport to 1 NETWORK adapter of the host, I have been able to confirm that the host VMWare issues guides on NIC1 with a destination MAC address of one of its own VM.

  After carefully reviewing the captured data, I noticed that the destination frames wrong "02:bf:cb:50:a2:76" MAC address actually belonged to "Local Area Connection 1' one of my Windows 2003 Server WHAT VM installed on the suspected host.

  Dig a little deeper, I discovered that this virtual NETWORK card is presented to the operating system as
  Name: Local 1 network connection
  "Type: VMware Accelerated AMD PCNet adapt."
  MAC: 02-BF-CB-50-A2-76

  But the configuration of the virtual machine in vCentre is
  Name: Network adapter 1
  Type: Flexible
  MAC: 00: 0C: 29:fa:e8:83

  Note the different MAC addresses.

  Digging a little further I discovered that Windows 2003 server has configured on "Local 1 network connection" network load balancing and NLB is the cause of the altered MAC address.

  Rather than to investigate further I have just placed a load balancer linux before the server windows 2003 cluster and that you turn off NLB.

  But I suspect that there is still a fundamental problem in the Virtual Switch VMware with how he learns the MAC addresses of the virtual machine is using flexible vNIC. In particular, with a virtual machine that uses a form to override the MAC address such as that used by NLB.

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• NETWORK card not detected after installing ESXi 4.1?

  Hi all

  I installed the ESXi Server 4.1 on a single server with the following configurations,

  CPU = Intel (R) CPU Xeon X 3430 @ 2.40 GHz

  Memory = 16GB

  NIC = Intel 82574 L Gigabit Network connection-2 no

  After that ESXi installation a NIC card not detected. But two cards network is the same configuration. Due to this problem, I can not configure grouping of NETWORK cards. Please suggest me. Thanks in advance.

  Hello!

  On the screenshot that you are using a motherboard Intel S3420GP. Just a NETWORK card is 82574L, the other on board is a 82578DM, which is not supported. So you will need additional network cards.

  See you soon,.

  Martin

• WLAN, lan, dmz on esxi with 2 network cards

  Hello

  I'm newbie esxi. What I'm trying to achieve on my esxi server is simple firewall/gw between internet (vmnic1), LAN (vmnix0) and DMZ. I have only physical 2 NICs in my server, DMZ should be "completely collapsed DMZ. I intend to have 1 web server (www, ftp) in the DMZ, 2 LAN and smoothwall acting as firewall servers.

  After reading some pdf files and some forum discussions I've come with an attached 'Networking' design.

  Could you experts please check design and advise me how secure is it and where are the potential pitfalls?

  COS you need to manage your esxi server.

  The following work of wll:

  An Esx3i server with two physical network (Teddy) interfaces

  pNic0 connected to the internet

  pNic1 connected to your local network

  3 vSwitches configured, one for each natachasery and one internal vSwitch (DMZ)

  Comments "Smoothwall" configured with 3 network cards, one for Internet, a local network, and a DMZ.

  Guests in the DMZ must be created with vNic on the DMZ vSwitch.

  SmoothWall manages the firewall and passes the correct port_number, etc. to the ip address in the DMZ.

  Kind regards

  Torben Jungsberg

• HP 2000 Vision: D1E80UA #ABA: Windows 7 Ultimate 64-bit drivers for network cards

  Upgrade from Windows XP to Windows 7 Ultimate 64 bit on a laptop HP 2000 Vision. Lost Wi - Fi connectivity. No recognized network card. Go: Device Manager: NO network card. No drivers for: Ethernet controller; Network controller; PCI device; SM Bus controller. Downloaded HP all software and drivers for: network drivers. Downloaded: Drivers for Ralink (HP) network on their Web site. The same problem. Need help. Any help would be greatly appreciated.

  Thank you

  Karl.

  You are the very welcome.

  You need these drivers for the remaining devices...

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp64801.exe

  Don't forget to install the graphics driver.  That rarely comes as a missing device, but if you see a standard vga adapter that is listed under the category of display device manager cards, this means that you need to install the graphics driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp58617.exe

• Network card driver are not not in Device Manager

  Original title: need network card (wired) for Windows XP

  I have a 3 year old desktop computer (Compaq Presario SR5548F) and a few days ago I downgraded my Vista to XP (raw just XP programs) and now I have no internet connection (internet works fine on another desktop computer) there due to lack of driver because I don't see any network adapter on my device manager. I went looking for a driver but I couldn't install them because I need other drivers/hardware or programs. Microsoft technical support (http://support.microsoft.com/kb/315275) it says to go to the hardware compatibility list, but when I click it, it took back me to the Windows 7 Compatibility Center, so I could not find a driver. Is there a driver that works without the need of a driver or hardware?

  Hi ThousandsBlades,
   
  -What is the brand and model of network card you use?
   
  Here is a link for the Windows XP hardware compatibility list.
  The latest Windows XP Hardware Compatibility List
   
  I suggest you to contact the manufacturer of your network adapter to see if there is a driver that is compatible with Windows XP for your network card.
   
  For more information, see:

  How to manage devices in Windows XP

• Cannot find network cards with Vista

  Hello

  I have problems with my Dell Inspiron 1720 under Vista not recognizing one of my network cards. I checked that my modem and router work correctly (they are) but still my laptop will not pick up not my Belkin N1 router wireless signal or when I hard it wire as it says network adapters are not found. I had a series of reports of unusual message telling me that the 'State of dependency is unknown", and that I should try to restart the DCHP etc. I followed the instructions to the point where it says "Windows cannot fix this problem - contact your service administrator.

  Any thoughts?

  Did you check the status of your network adapters in the Device Manager? If they are disabled, try allowing them.

  I hope I could help

• need for server 2008r2 Pavilion p7-1000 network card driver of (tried win7 drivers N.G.)?

  Hello

  I'm trying to install the server 2008r2 on the HP Pavilion p7-1000, has four cores amd 64 bit cpu, 8 GB ram, 1 TB hard drive.   For some reason I can't seem to locate the drivers for the NIC realtek.  Of course, I'm pressed and trying to accomplish something in a single day.  And many other things at the same time.  I never thought that this Server 2008 would have a problem with a common network card.

  Someone has a direct link to a kind of driver that works with this?  I tried to go to the realtek, and perhaps I simply downloaded the wrong software.  But what I 'As' on their part, did not work.  I tried a "auto-install" program, but also what I THOUGHT it was the real Server 2008 drivers for the network card.

  Thanks for advice and guidance

  Hello:

  Have you tried this one directly from Realtek site?  a 3rd on the list... According to this record in the series, they have 8105E card.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Paul

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s