Cannot find network cards with Vista

Similar Questions

• Windows cannot find network card until I reboot

  Hello

  I noticed a few threads that are similar to my problem, but I have a recurring problem that is boring and not too disruptive. Everytime I turn on my computer Dell Inspiron desktop for the first time, every day, windows is unable to locate a network card is installed correctly.  When I check in the network device manager, there is nothing available. I then restart my machine, and then windows (64-bit 7) finds the suitable network and connect to my router etc, and all is well. When I check the Device Manager after the reboot, I see under network: Broadcom Netlink (TM) Gigabit Internet.  When I click on this and try to update the driver, reports of windows that it is up-to-date!
  So, my problem happens whenever I start my computer, but never when I restart!
  Any suggestions? As I don't want to start and restart my machine every day of her life!
  Thank you very much
  Mick

  I suspect a hardware problem with the adapter.

  You can try to uninstall the card in the Device Manager and then reboot and let Windows reinstall.

• Windows XP cannot find network card

  WinXP r3.

  Last week, it happened.

  See the NIC hardware Manager...

  XP can't find it.

  Linux ran resue disc for diag, he see it and runs it.

  Scanned with 2 AV programs, only 1-2 little things.

  Router, view map when enabling/disabling of the bios.

  Thank you... If I have to, I can get the Info material system and its Committee of intell Core 2 Duo...

  Intel DG35ec desktop

  NO software of hardware change.  (Check the history)

  WELL, I tried something and it worked.

  I have zipped past 1 small thing on the hardware Manager.

  EVEN if it appears and NO red check marks...  To read the first tab discription...

  Driver has not loaded.

  1 fixit works when you can not connect?  thought it was an AutoCorrect entry.

  2 done, and he could not find the net card... do not see at all...

  as if something was to keep XP to put material config.

  (history)

  8 months ago this person, click on the button to send MS a warning of failure of...

  Quickly, she was contacted by the problem. (no problem)

  Claiming to represent Ms.

  She paid to have this service whenever something has been reported.

  1 week ago, they called and told him that his coverage was ending they needed more money.

  She said no.

  They mentioned that would end his service and his net service would leave... 1 hour later... She had no internet.

  We strive to collect information on them... but Peter parker and Mark (?) williams info given, leads to STRANGE phone numbers.

  She paid several times with a credit card, and the company will not disavow further charges because she allowed them before.

  Let's see if we can follow the Bank they went to... and see if we can send this information to Ms.

  NIAS business solutions...

  Freeze.com

  W31 BOT... not considered virus?

• Cannot find a volume with sufficient space for the extraction of the file, trying to watch a movie on netflix with Silverlight plug-in

  Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.

  Hi cardsharkha,

  I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists

  How to manually clean a broken Silverlight installation

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot find a process with the name 'perl '.

  Hey all,.

  Tryign to configure the script in my dev environment and I receive the email ok, but does not get the report attached to the email... Here are the keys error I get with executing the script on the computer Windows 7 using PowerCLI 5.0... Thoughts?

  ___________________________________________________________________________

  Get-Process: cannot find a process with the name 'perl '. Process audit na
  me and call the cmdlet again.
  C:\scripts\report.ps1:3 char: 18
  + $pp = get-process < < < < perl
  + CategoryInfo: ObjectNotFound: (perl:String) [Get-Process], Pro
  cessCommandException
  + FullyQualifiedErrorId: NoProcessFoundForGivenName, Microsoft.PowerShell.
  Commands.GetProcessCommand

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:4 tank: 16
  + $pp.waitforexit < < < <)
  + CategoryInfo: InvalidOperation: (waitforexit:String)], Runti
  meException
  + FullyQualifiedErrorId: InvokeMethodOnNull

  New-Object: Exception calling ".ctor' with '1' or the arguments:"Could not find fi.
  the "C:\scripts\vmware_health_check20110912.html". »
  C:\scripts\report.ps1:8 char: 18
  + $att = new-object < < < < Net.Mail.Attachment ($file)
  + CategoryInfo: InvalidOperation: (:)) [New-Object], MethodInvoca)
  tionException
  + FullyQualifiedErrorId: ConstructorInvokedThrowException, Microsoft.Power
  Shell.Commands.NewObjectCommand

  Exception by calling 'Add' with '1' arguments: "value cannot be null."
  ' Parameter name: agenda.
  C:\scripts\report.ps1:14 char: 21
  + $msg. Attachments.Add < < < < ($att)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:16 char: 13
  + $att. Have < < < <)
  + CategoryInfo: InvalidOperation: (available: String) [], RuntimeEx
  reception
  + FullyQualifiedErrorId: InvokeMethodOnNull

  Remove-Item: can not find the path "C:\scripts\vmware_health_check20110912.html" be
  cause, that there is not.
  C:\scripts\report.ps1:17 tank: 12
  + Remove-Item < < < < C:\scripts\vmware_health_check$dt.html
  + CategoryInfo: ObjectNotFound: (C:\scripts\vmwa...ck20110912.ht
  ml:String) [Remove-Item], ItemNotFoundException
  + FullyQualifiedErrorId: PathNotFound, Microsoft.PowerShell.Commands.Remov
  eItemCommand

  The script uses the Perl API and not the PowerShell.  So the last SDK Perl install and be sure that your backup script as *.pl rather than *.ps1

  Concerning
  Joerg

• Cannot find network shared printer

  to change printers and now with vista laptop can't find shared printer (with xp) - no problem with gettng online

  You guarantee that the file and printer sharing is enabled in xp and vista? Have you try mapping IP is either the computer/laptop by which the printer is connected to? Have BTW you installed the printer drivers? Under network and sharing Center check it out and see if you are able to see the two pc or laptop? Also make sure there there is no third-party firewall if, either set it up or have it uninstall

• Windows cannot find any neworks with Wi - Fi

  I have a Toshiba laptop that connects to the internet via a Belkin N router.

  During an internet session, the laptop can lose connection and if I try to connect to a network I get the error message "Windows cannot find any network."

  Nothing has been changed during the session.

  Laptop computer shutdown and restart will allow the laptop to auto automatically reconnect to the preferred network.

  My impression is that it is a software problem.

  Hi kaspercat,

  Rather than restart you tried the option "diagnose and repair"? Right click on the internet icon (two monitors flashing) in the notification area and in the menu drop-down, select diagnose and repair. This usually works fine for me if the laptop on my network loses connection.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• 'Cannot install network card - check WINBOM'

  Hello

  Two weeks ago, my network card and my sound card are away. I brought the laptop to a premium of IBM partner, where the motherboard has been changed with a view that all would be ok, but with a hint of the service technician that I should try to recover; the problem is still not resolved.  Yesterday I recovered from a very old, when version the adapter card and his network worked correctly. Since then my sound card works, but only with cracks. Of course, this is not acceptable. The network adapter does not work in any case.

  When I boot my laptop with the ACCESS IBM button, I get an error message from the FACTORY. EXE "cannot install the network adapter - check WINBOM.

  I checked, but there is no factory.exe on my hard drive, as well as there is no file winbom.ini on my hard drive. I found the entry empty winbom in the registry.

  In the System Manager there is no listed (instead of those wireless) network card. No way to install a.

  I don't know what to do now. Can someone think there is a solution for my thinkpad or should I sent to IBM/Lenovo?

  The machine is a T43p 2668 PEG.

  See you soon,.

  Herwig

  Hello Roberto,

  During this time, the problem is resolved. In fact, it was the wireless network card that caused the problem. After 2 weeks and 3 months, the laptop is finally repaired. But I had no chance to check yet, since I'm still in Ireland will be back in Germany at Christmas.

  See you soon,.

  Herwig

• problem with network card with 10 Windows and Fusion

  I can't get my network card to work as I have improved my VM to Windows 10.  It shows that permits and OK in the Windows Device Manager but disabled and cannot be enabled in network connections. This happened with Fusion 7 and continues since I upgraded to Fusion 8.  I reinstalled VMware tools, remove the card and reinstalled in Windows, remove the card and reinstalled in the settings of the Virtual Machine in Fusion.  It happens both in mode 'Share with my Mac' and automatic bypass. Please advise.  Thank you.

  As mentioned in another thread: got back to Windows 7, search, and uninstall a client VPN, re-start at level to Windows 10.  Networking, then worked correctly.

• Aspire one "cannot reconnect network card.

  OK, so I have an Acer Aspire One AOD260 net book I've had for a few years.

  Internet connection no longer works, WiFi is not my thing, so I ran the troubleshooting and it comes up saying there are problems with the network adapter. I get the message "unable to reconnect to the network card.

  I get this message no matter where I am, so I think that the problem is with the Netbook not a router or a Modem.

  MS Windows 7 Home Premium 64-bit
  Intel Atom CPU M550 @ 1.50 GHz 2.0 GB RAM
  Graphics controller Intel GMA 3150

  Device Manager says:
  Atheros AR8152 PCI - E Ethernet controller
  Broadcom 802.11n network adapter
  Microsoft Virtual WiFi Miniport adapt

  Under network connections, it will list 2 with a red X, Broadcom 802.11n does not, but it says unidentified network, no internet connection.

  What did I try?
  I have tried to plug the Ethernet cable from the computer - no change, still get the message of the adapter
  I tried to plug in an adapter N900 Wireless dual band USB - no change
  I disabled the firewall and AV - no change software

  I've uninstalled and reinstalled all the drivers - no change

  Yes my router works on everything except this Acer

  As I said that WiFi is not my thing, so I really need help how to solve this problem. Please Suzie

  Download this 2 packages and install them:

  Atheros LAN driver

  http://global-download.Acer.com/GDFiles/driver/LAN/Lan_Atheros_1.0.0.35_W7x64_A.zip?acerid=634558012...

  Broadcom wireless LAN:

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Broadcom_5.100.249.2_W7...

• Cannot find the 'endpoint' with 'RemoteObject' property in Flex 3

  Hi all
  I am uttering the 'RemoteObject' class object inside the class action script. I'm here
  unabe to find ownership of "endpoint" with the remote object in Flex 3.0.I am currently using
  the SDK 3.2.Earlier I used this property earlier in Flex 2.0.Can whole body sugget me what
  is the replacement in flex 3 for this, or how to get this property.
  
  In Flex 2.0
  ===========
  var rm:RemoteObject = new RemoteObject;
  RM.source = "ServerSideClassName";
  RM.destination = 'amfphp ';
  RM. EndPoint =http://Ip or server PC/ProjectName/amfphp/gateway.php;
  In Flex 3 (sdk 3.2)
  ==================
  var rm:RemoteObject = new RemoteObject;
  RM.source = "ServerSideClassName";
  RM.destination = 'amfphp ';
  Cannot find rm.endpoint here.
  Thnx in advance
  Mayeul Singh Bartwal

  Hello Arnaud

  I m not sure but I think you used the remote object from the package of «mx.rpc.remoting.RemoteObject» class

  instead of "mx.rpc.remoting.mxml.RemoteObject. That's why is does not show property as the 'end point '.

  To verify remote call from the package «mx.rpc.remoting.mxml.RemoteObject» with the object

  May helps you

  Thank you

  Virat Patel

• Context: Target cannot find the node with id 33

  Hello

  In my qml file, I used the spreadsheet component. When you click the button, I tried to call the RPC function that calls the web service and according to the response from the service web I have to redirect to special qml. But while qml opening of the CPP, I get the following errors.

  libpng warning: iCCP: known incorrect sRGB profile
  Context: Failed to find target node with id  33
  

  For a moment, I am able to redirect to special qml but control returned to previous qml.

  I am not able to understand why this error came? When I run my application a day before it was working fine. When I reset the device and upgrade the operating system 10.2 I get this error.

  Here is my code in the PRC:

         QmlDocument *qml = QmlDocument::create("asset:///backgroundProcessImageFile.qml");
      qml->setContextProperty("RoamAssist", this);
      AbstractPane *root = qml->createRootObject();
      globalApp->setScene(root);
  

  Hey... my problem is solved...

  Insted to create the user interface using the sheet I just create new page and open it using NavigationPane.

  I still don't know if this issue is due to the component of the roadmap or due to the os version upgradation.

• Windows cannot find network mode safe mode with networking cards?

  Hello.

  When I try to access a Safe Mode with network I can not connect to the Internet, because windows can not find any network adapters. But it is perfectly fine in Normal Mode. I tried to uninstall and reinstall the NICs without success. What can I do? I need help badly.

  Or is it simply not not in safe mode with network and will rather /normal/Mode safe.

  BTW, my laptop is model Vaio series S 2011.

  Thank you very much.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet in safe mode with network. Please correct me that I misunderstood.

  Please provide us with additional information by answering a few questions below, this will help us better solutions to the problems.

  -Why are you trying to connect to Internet in safe mode with networking?

  -Do you get any error code or error message?

  I doubt that the choices you make in the options of safe mode takes you to the safe mode and the insecure with networking mode.

  Please do the following and check if you are able to boot into safe mode with network.

  a. restart the computer and press the F8 key during reboot, until you get the Advanced startup options.

  b. in the boot advanced options, use the keyboard to select safe mode with network and press ENTER.

  c. This will start the computer in safe mode with network. Once the computer has been started, check if you are able to connect to the Internet.

  For reference:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please try these steps and if the problem persists, please tell us so that we can help you.

• XPS M1330 can not find network card after reinstalling Windows Vista

  Hi all

  I'm passing my computer to a member of his family and wanted to give them a new installation, so I used the disc of Windows Vista (32-bit SP1) shipped with the laptop and reinstalled Vista on the computer. Everything worked fine until I wanted to connect to the internet, then Windows tells that there are no available networks. When I chose "Why doesn't windows find all networks" he stated that "this computer doesn't have a wireless network installed and configured card". I put in the Dell driver and Utilities CD that shipped with the computer and installed the drivers which seemed related to networking or communications, but the problem persists. I guess it's some sort of driver problem (as the computer used wireless before the reformat (a few hours ago) and so the device itself seems to work.)

  I would greatly appreciate any help to get this race. :)

  Thank you!

  Hi Chris,

  Please share the system model and the operating system installed on your computer?

  If you are facing problems with the wireless, you can follow the steps below to check if the drivers are listed as installed in the Device Manager:

  • Press 'Windows' + 'R' key on keyboard.
  • Type "devmgmt.msc" into the box run without quotes.
  • In the Device Manager window, expand network adapters and verify if your wireless card is on the list.

  If the wireless driver is not present in the system and is displayed as a network controller in the section other devices with a yellow question mark, you can download the drivers from the link: http://dell.to/QjjZDA -> Enter-> the serial number of your system, select the operating system-> expand the category network to download/install wireless drivers

  I hope this helps. Please respond to the findings.

• HP series model P6000: p6220gr: cannot find graphics card

  Hello! I bought this pc http://support.hp.com/us-en/document/c02575959 and after 4 years hard work and my game graphics card is damaged and cannot be resolved.  I want you to tell me a card that can read my phones. I don't want to change this computer, I'm so happy. The money I got is $ 40 to $ 75. Please give me 2-3 options to choose from.

  Thank you!

  Simon, welcome to the forum.

  Here is a video card that works in your motherboard and your price range.  The problem you have is to find one that will work with the existing 300W power supply unit (PSU).  Also, you can't go much lately because these video cards require UEFI in the motherboard rather than a standard BIOS.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.